PCE Instruments HVAC Testing Equipment

• Robust Anemometer for fixed installation/various output signals/for wind warning systems, building services and building automation.
• It impresses with its compact design and various output signals and can be used for applications in warning technology, building automation and home technology.
• Depending on the Anemometer, a 4 to 20 mA, 0 to 10 V, Modbus or pulse output is available and is designed as a star, so that operation independent of the wind direction is guaranteed.
• It is made of robust plastic and is therefore resistant to rust and corrosion and is also protected to IP65.

• Air Flow Meter/Wind Warning Device PCE-WSAC 50-110 is an anemometer with pre-alarm and alarm/display of wind speed/easy operation/display of the average speed of the last 2 and 5 minutes.
• The wind warning device can be used in different fields of application. In use, the wind measuring device carries out measurements from the smallest wind movements.
• The wind warning device can be used on the one hand to monitor the current wind speed. On the other hand, it is also possible to use the wind measuring device to measure the average value of the last two or five minutes.

• Air Flow Meter / Wind Warning Device PCE-WSAC 50-111 Anemometer with pre-alarm and alarm/RS485 interface/display of wind speed/easy operation/display of the average speed of the last 2 and 5 minutes.
• The wind warning device can be used in different fields of application. In use, the wind measuring device carries out measurements from the smallest wind movements.
• The wind warning device can be used on the one hand to monitor the current wind speed. On the other hand, it is also possible to use the wind measuring device to measure the average value of the last two or five minutes.

• Air Flow Meter / Wind Warning Device PCE-WSAC 50-120 Anemometer with pre-alarm and alarm/RS485 interface/display of wind speed/easy operation/display of the average speed of the last 2 and 5 minutes.
• The wind warning device can be used in different fields of application. In use, the wind measuring device carries out measurements from the smallest wind movements.
• The wind warning device can be used on the one hand to monitor the current wind speed. On the other hand, it is also possible to use the wind measuring device to measure the average value of the last two or five minutes.

• Air Flow Meter / Wind Warning Device PCE-WSAC 50-121 Anemometer with pre-alarm and alarm/RS485 interface/display of wind speed/easy operation/display of the average speed of the last 2 and 5 minutes.
• The wind warning device can be used in different fields of application. In use, the wind measuring device carries out measurements from the smallest wind movements.
• The wind warning device can be used on the one hand to monitor the current wind speed. On the other hand, it is also possible to use the wind measuring device to measure the average value of the last two or five minutes.

• Air Flow Meter / Wind Warning Device PCE-WSAC 50-211 Anemometer with pre-alarm and alarm / RS485 interface / display of wind speed / easy operation / display of the average speed of the last 2 and 5 minutes.
• The wind warning device can be used in different fields of application. In use, the wind measuring device carries out measurements from the smallest wind movements.
• The wind warning device can be used on the one hand to monitor the current wind speed. On the other hand, it is also possible to use the wind measuring device to measure the average value of the last two or five minutes.

• Air Flow Meter / Wind Warning Device PCE-WSAC 50-210 Anemometer with pre-alarm and alarm/display of wind speed/easy operation/display of the average speed of the last 2 and 5 minutes.
• The wind warning device can be used in different fields of application. In use, the wind measuring device carries out measurements from the smallest wind movements.
• The wind warning device can be used on the one hand to monitor the current wind speed. On the other hand, it is also possible to use the wind measuring device to measure the average value of the last two or five minutes.

• Air Flow Meter / Wind Warning Device PCE-WSAC 50-220 Anemometer with pre-alarm and alarm / display of wind speed / easy operation / display of the average speed of the last 2 and 5 minutes.
• The wind warning device can be used in different fields of application. In use, the wind measuring device carries out measurements from the smallest wind movements.
• The wind warning device can be used on the one hand to monitor the current wind speed. On the other hand, it is also possible to use the wind measuring device to measure the average value of the last two or five minutes.

• Air Flow Meter / Wind Warning Device PCE-WSAC 50-221 Anemometer with pre-alarm and alarm / RS485 interface / display of wind speed / easy operation / display of the average speed of the last 2 and 5 minutes.
• The wind warning device can be used in different fields of application. In use, the wind measuring device carries out measurements from the smallest wind movements.
• The wind warning device can be used on the one hand to monitor the current wind speed. On the other hand, it is also possible to use the wind measuring device to measure the average value of the last two or five minutes.

• Air Flow Meter / Wind Warning Device PCE-WSAC 50-310 Anemometer with pre-alarm and alarm / display of wind speed / easy operation / display of the average speed of the last 2 and 5 minutes.
• The wind warning device can be used in different fields of application. In use, the wind measuring device carries out measurements from the smallest wind movements.
• The wind warning device can be used on the one hand to monitor the current wind speed. On the other hand, it is also possible to use the wind measuring device to measure the average value of the last two or five minutes.

• Air Flow Meter / Wind Warning Device PCE-WSAC 50-311 Anemometer with pre-alarm and alarm / RS485 interface / display of wind speed / easy operation / display of the average speed of the last 2 and 5 minutes.
• The wind warning device can be used in different fields of application. In use, the wind measuring device carries out measurements from the smallest wind movements.
• The wind warning device can be used on the one hand to monitor the current wind speed. On the other hand, it is also possible to use the wind measuring device to measure the average value of the last two or five minutes.

• Air Flow Meter / Wind Warning Device PCE-WSAC 50-320<br />Anemometer with pre-alarm and alarm / display of wind speed / easy operation / display of the average speed of the last 2 and 5 minutes.
• The wind warning device can be used in different fields of application. In use, the wind measuring device carries out measurements from the smallest wind movements.
• The wind warning device can be used on the one hand to monitor the current wind speed. On the other hand, it is also possible to use the wind measuring device to measure the average value of the last two or five minutes.

• Air Flow Meter / Wind Warning Device PCE-WSAC 50-321<br />Anemometer with pre-alarm and alarm / RS485 interface / display of wind speed / easy operation / display of the average speed of the last 2 and 5 minutes.
• The wind warning device can be used in different fields of application. In use, the wind measuring device carries out measurements from the smallest wind movements.
• The wind warning device can be used on the one hand to monitor the current wind speed. On the other hand, it is also possible to use the wind measuring device to measure the average value of the last two or five minutes.

• PCE-WSAC 50W 230 Air Flow Meter Radio anemometer warning system / Wind monitoring on construction cranes / 4 to 20-mA analog output / Power supply 110 to 230V AC
• It is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine.
• Equipped with alarm relay for a pre-alarm or main alarm. Due to the high measuring range of up to 50 m/s of the anemometer, stormy gusts can also be monitored.

• PCE-WSAC 50W 24 Anemometer<br />Radio Wind Warning System / Wind Monitoring on Construction Cranes / 4 to 20-mA analog output / Power supply 110 to 230V AC or +24V DC
• It is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine.
• Equipped with alarm relay for a pre-alarm or main alarm. Due to the high measuring range of up to 50 m/s of the anemometer, stormy gusts can also be monitored.

• Robust Air Flow Meter for fixed installation / 4 to 20 mA output for wind warning systems, building services and building automation
• The Air Flow Meter was developed to measure the wind direction in the industrial environment and can be connected to data loggers, process control systems, displays.
• A 4 to 20 mA signal is available as an output signal on the Air Flow Meter. It has no dead center in the north and measures the wind direction from 0 to 360 °.
• In order to protect the air flow meter from external weather influences, it is protected according to IP65.

• The PCE-423 Thermo-Anemometer with thermal sensor is highlighted by its good relation between price and quality. It has a high resolution to be used for different applications.
• It belongs to the the basic equipment for professionals working with ventilation systems and is also used in institutional research and development.
• The thin probe (8 mm/0.3 in diameter) makes it possible to use the Thermo-Anemometer in areas with a minimum range of measurement such as inside refrigeration units.

• PCE-AS1 Air Sampler Portable 100 lpm aerosol hygiene monitoring device for airborne microbial, microbiological, bacterial, mold, fungi and virus analysis.
• Is an air sampling meter used to assess microbiological pollution and monitor hygiene. Designed for use in hospitals, clean rooms and food and beverage, cosmetics and pharmaceutical production facilities, the PCE-AS1 air sampler meets the latest requirements for devices used for airborne microbial analysis.
• Optional ISO calibration lab certificate as an accessory. The Air sampler uses the aerosol impaction principle or Andersen collision principle to assess air quality.

• PCE-MPC 10 Air Sampler Portable handheld particle counter for monitoring particulate matter (PM) concentrations in the air / 2.5 µm and 10 µm particle sizes / Measures air temperature and relative humidity / Internal memory stores up to 5000 date-and-time-stamped data sets / Integrated data logger with adjustable sampling time.
• PCE-MPC 10 is a portable handheld air sampler or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).
• The particle counter can be powered either by the rechargeable battery or the USB port. The USB port also is used to charge the battery.
• The particle counter takes measurements even while the battery is charging, allowing for uninterrupted IAQ monitoring.

• Air sampler PCE-MPC 20 Dust measuring device for the measurement of pollutant content of the atmosphere / With data memory / USB interface / Mass concentration / Particle counter
• The dust measuring device PCE-MPC 20 is a particle counter that measures the particles in the atmosphere. The measurable particle sizes of the dust measuring device are 0.3, 2.5 and 10 ¼m.
• In addition to the particle counter function, the dust meter also measures the mass concentrations PM2.5 and PM10. The built-in high-performance pump ensures a sufficient flow rate at the dust measuring device.

• Air Sampling Device with data logger / HCHO measurement / battery for mobile use / <br>2.8 “TFT display / measurement of mass concentration / data storage on SD card.
• This Air Sampling Device has many functions. With the Air Sampling Device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.
• In addition to measuring the particles, the Air Sampling Device can also measure the PM 2.5 and PM 10 mass concentration. The mass concentration of the Air Sampling Device determines the weight of the particles on one cubic meter.

• Measures 6 sizes of particles: 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
• Offers a robust, 80 MB internal memory
• Features a large, full-color LCD display with back-light
• Includes a built-in camera for image and video recording
• Contains sensors for measuring air temperature, dew point and relative humidity
• Displays temperature measurements in degrees Celsius (°C) or degrees Fahrenheit (°F)

• Measures air temperature, dew point and relative humidity
• Cumulative, differential and concentration particle counting modes
• Stores up to 5,000 data sets to memory
• PM channels: PM 2.5, PM 10, including mass concentration mode

• Accurate Anemometer meter with connection port, memory, software for measuring wind speed, temperature and Anemometer.
• This Anemometer meter is very economical. With this Anemometer meter you can measure wind speed and air temperature.
• Once you have the right cross section, the Anemometer meter will show the air volume flow. The readings can be stored in the device and then transferred to a computer for further analysis.

• This Anemometer meter is very economical. With this Anemometer meter you can measure wind speed and air temperature.
• Once you have the right cross section, the Anemometer meter will show the air volume flow. The readings can be stored in the device and then transferred to a computer for further analysis.
• As such, you can take a series of measurements with the Anemometer meter off-site, then look closely at the data once back at the office. In this way, you save time and maintain a high level of accuracy in readings.

• The anemometer PCE-ADL 11 is a data logger for wind speeds. The configuration on the wind measuring device is carried out via the supplied software and provides multiple settings for measurement.
• The wind meter measures various parameters. These include m/sec, km/h, knots, mph and ft/min. In addition to the measurement parameters, the measurement intervals can be set on the software by the wind measuring device.
• The data logger function accommodates 60,000 measured values. After completing the series of measurements, the data from the wind gauge can be read out on the computer via the software.

• The Bluetooth Anemometer PCE-BDA 10 is an optimal measuring device for heating and plant technicians. The Bluetooth Anemometer is an easy-to-use impeller anemometer.
• The measuring range extends from 1 to 25 m / s. The vane anemometer displays the measured air flow in 5 different units. Furthermore, the temperature of the wind is measured by the Bluetooth anemometer.
• The meter transmits the measured values ​​to a smartphone via Bluetooth. Mobile phones with iOS or Android can be used here. In addition, the measured values ​​are also displayed on the LCD by the Bluetooth anemometer. This allows the vane anemometer to be used without a smartphone.

• The anemometer PCE-EM 890 is an instrument for measuring environmental conditions. The anemometer gives you an accurate measurement very quickly.
• Due to the small dimensions and the low weight, this anemometer is an easy-to-use information system on the weather condition. It is possible to switch between the measuring functions with just one push of a button.
• This anemometer is ideal for technicians, sailors, farmers and many other people who are dependent on the weather or whose activities are significantly influenced by the weather.

• The PCE-TA 30 Anemometer can measure air velocity, air temperature and air flow.
• It shows measurement values in its large back-light LCD display and also the current value on the display as well as max. and min. values.
• It has a flexible probe with a length of 40 cm which makes it possible to use in areas here there is limited space to measure, such as cooling systems. It is the ideal tool for the assembler to perform instantaneous measurements.

• The climate meter with compact size, new structure and integrated vane anemometer is equipped with a one-hand operation.
• Besides the wind speed, the climate meter measures the temperature, the humidity, the dew point, wet bulb temperature and the air volume. It is possible to save 5 areas.
• The average wind speed can be determined from the 20 storable points. Min and Max function. It is possible to record a measuring with the HOLD-function.

• It is an extensively used measuring instrument that provides the opportunity to determine air speeds, air temperature and infrared temperature.
• The back-lit LCD allows comfortable readings and facilitates use in dimly lit areas and has a thread on the back to mount the windmill it. Here it is possible to mount the wind meter on a thread.
• The large display provides an accurate overview of the measured values and can optionally be back-lit, which makes the wind meter useful even in low light conditions.

• PCE-VA 20 is a multi-function thermometer for assessing wind, weather, indoor/outdoor environmental climate conditions as well as for testing heating, ventilation and air conditioning or cooling (HVAC) systems.
• In addition to measuring air flow velocity (i.e., wind speed), this multipurpose handheld device measures volume flow, relative humidity (RH), air temperature, dew point temperature and wet-bulb temperature.
• This combination anemometer-hygrometer-thermometer features a 10 cm/3.9″ Ø fan impeller, easy-to-read back-lit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.

• The compact altimeter PCE-AM 85 is an ideal companion for every outdoor activist. This lightweight altimeter with altimeter, and barometer function should not be missing on any tour.
• The altimeter informs you about the reached altitude of -2000 … 9000 m / -6,561 … 29,527 ft. The barometer measures the relative and absolute air pressure in hPa.
• In addition to the measurement of air pressure and altitude, the altimeter is able to accurately determine the wind speed via the integrated impeller.

• The CO2 data logger PCE-AQD 10 is used to measure air quality. It measures carbon dioxide, temperature and humidity.
• The CO2 sensor from the unit is separated from the main unit with a connection cable. The measured values ​​are displayed on the large display of the data logger.
• The air quality measurement data is stored on an SD card and can set the measured data in adjustable intervals of 1 to 600 seconds.
• The unit is used to monitor indoor air quality in lounges, offices, schools, etc. Through the SD memory, the CO2 measurement data can be monitored over a long period of time to initiate further measures to improve the room air quality.

• The air quality data logger is an ideal measuring device for monitoring the air quality at workplaces.
• It is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure. All these parameters give the occupational safety expert information about the air quality.
• The measured values ​​are stored by the CO2 air quality data logger on an SD memory card and the format is XLS, so the measured values ​​can be read directly into Excel, without having to be incorporated into a new software.

• The moisture meter is a measuring device for non-destructive moisture measurement on concrete and screed. Here, the spring electrodes of the moisture meter are pressed onto the surface to be tested.
• Within seconds, the moisture meter will show the moisture content to the operator. Different scales are already stored in the moisture meter for a wide variety of surfaces. These are available to the operator directly from the moisture meter.
• As another special feature, the moisture meter has an automatic shutdown. This feature automatically shuts off the meter if the moisture meter is not used for 5 minutes.

• It is a damp meter for soil ideal for use in agriculture, crop science, horticulture, botany, landscaping, gardening and environmental testing applications.
• This portable handheld damp meter measures soil moisture or humidity quickly, easily and accurately.
• The meter’s compact size and battery power supply make it the ideal solution for taking moisture measurements in the field.
• A water-resistant ABS plastic housing protects the electronic components of the meter from inclement weather and adverse operating conditions.

• The decibel meter is equipped with a GPS receiver in addition to the sound measurement function. The GPS function allows the user to assign the measured values to an exact position.
• This integrated precision pulse decibel meter follows all valid standards and guidelines (Class 1 EN/IEC 61672, ANSI S1.4-1983, ANSI S1.43-1997 EN/IEC61260, etc.) The decibel meter display adjusts the sound pressure level numerically and graphically in real time and has an integrated data logger. The measurement data is stored on a micro SD card. This card can be read directly in the PC.
• An additional kit for outdoor sound measurement PCE-4xx-EKIT can be combined with the decibel meters PCE-428, 430 or PCE-432. This kit makes it possible to measure the outdoor noise with a noise meter over a long period of time.

• The decibel meter PCE-MSM 4 has features that you will only find in other more expensive devices. The precision sound level meter in slim design is ideal for mobile measurements of sound.
• Noise generated in various environments, at the workplace, at machine controls, on the construction site, at events, e.g., concerts, or neighborhood noise can be easily and comfortably measured and displayed with the sound level meter.
• The sound level meter has a high measuring accuracy of ± 1.4 dB and is therefore very well suited for the above mentioned measuring abilities.

• In loud environments, it is often difficult to pinpoint the source of a sound. The easy-to-operate PCE-MSV 10 sound level meter visualizes sound in real time, creating a visual road map to a sound’s source.
• Also referred to as a noise meter, sound pressure meter, portable sound camera or sound level camera, the PCE-MSV 10 sound level meter can be used in various stages of machine and equipment design, manufacture and operation, from engineering research and development (R&D) to preventative maintenance and beyond.
• Recorded images and videos can be transferred via a WLAN from the PCE-MSV 10 sound level meter to a computer for further analysis.
• When using the included sound measuring microphone, the PCE-MSV 10 also can be used as a general sound level meter without visualization.

• PCE-NDL 10 is a high-quality decibel meter with data logging capabilities.
• This noise dosimeter records sound pressure level (SPL) measurements as well as dosimetry (dose) measurements in decibels (dB) and saves the measurement data to the internal memory, which can then be transferred to an SD card.

• PCE-322A is a handheld, portable, professional Class II sound level meter or decibel (dB) meter with built-in data-logging or data-recording functionality.
• It is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time. A mini tripod is included in the delivery contents, as is a wind noise suppressor.
• The recorded decibel readings help users determine if and what protective measures need to be taken to ensure overall health, safety and productivity in industrial, commercial, occupational, educational and residential environments. The decibel meter can also be used to evaluate acoustics for audio installations.

• PCE-SDL 1 is a class 2 (type 2) data-logging sound level meter, sound pressure level (SPL) meter, noise meter or decibel (dB) meter used for long-term acoustic measurements.
• The Windows-compatible software included with the meter allows for the display of a progressive graph of the data collected.
• The software also enables the user to set alarm limits indicated on the meter via flashing LEDs.

• Is used for permanent monitoring of the sound level. In addition to storing the measured values, the sound level data logger is able to display the measured values ​​on a display and output them as a 4 to 20-mA analog value.
• The sound level data logger has a wide measuring range of 30 to 130 dB. Frequency weighing is done in A or C depending on the selected measurement mode.
• Alternatively, the sound level data logger can measure the sound level in fast or slow mode and measured values ​​are stored by the sound level data logger as an Excel file on a memory card.

• PCE-MMK 1 is a portable handheld digital moisture meter used to measure the moisture content of wood, paper, textiles, concrete and other building materials. This multi-function environmental meter also measures ambient temperature and ambient relative humidity.
• Ideal for quality control and incoming goods inspections, this multipurpose moisture analyzer comes with short and long insertion needles as well as 3 different external electrodes (ramming, penetrating, paper).
• Self-test or pre-set measuring modes based on material type are available from the user friendly navigation menu, as are temperature compensation, maximum / minimum value, LCD back-light and dry-moist-wet indicator settings.
• An easy-to-read display shows digital and bar graph values on screen. Moisture % displayed is material moisture with respect to dry mass (e.g., 100 % material moisture for 1 kg of wet wood = 500 g water).

• PCE-VOC 1 is a portable handheld volatile organic compound (VOC) and formaldehyde (HCHO) meter or gas leak detector for indoor air quality (IAQ) monitoring applications.
• This easy-to-use VOC meter is ideal for measuring total volatile organic compound (TVOC) and formaldehyde (HCHO) levels in homes, offices, factories, laboratories, hotels, schools and other indoor environments. The VOC meter’s long-lasting rechargeable lithium-polymer (LiPo) battery and included 9V power adapter/charger ensure uninterrupted IAQ monitoring.
• Featuring a compact and lightweight yet heavy-duty design, the VOC meter displays units in parts per million (ppm) or milligrams per cubic meter (mg/m³). In addition to emitting an audible alarm, the device’s large, easy-to-read LCD screen turns red when a critical VOC or HCHO level is reached.

• LED display
• For flammable gases
• 500 mm / 19.6″ sensor
• Optical, acoustic, and haptic alarm
• Fast response time and rechargeable battery

• This environmental meter detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the environmental meter. Thanks to the semi-rigid hose on the gas detection device, the sensor can be aligned in almost any position to reach even inaccessible places.
• This makes the gas detection device an ideal measuring device for employees who want to detect sporadically escaping gases (testing of plants during a tour of the plant, checking engines and supply lines, testing gas supply lines).
• A manual setting of the environmental meter is not necessary as the gas detector automatically calibrates.

• A wall-mounted gas detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors.
• This indoor air quality meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.
• The alert meter consists of two parts: the sensor unit and the remote display unit. This allows for safe monitoring outside the exposure zone.
• By monitoring CO2 concentration, the indoor air quality meter helps protect workers against the health hazards associated with CO2, a colorless and odorless gas used in the food, metal, chemical and waste management industries.

• This multifunctional digital device is used to measure wind speed, volumetric air flow, temperature, relative humidity, light and barometric pressure.
• With just the touch of a button, measurements are displayed on the easy-to-read 8 mm (0.32″) LCD screen with back-light. This user-friendly hygrometer has many practical applications for monitoring weather conditions outdoors at construction job sites, farms, marinas and more.
• This multi-purpose meter can be used for indoor air quality (IAQ) monitoring and a high-precision type K thermocouple sensor enables fast temperature measurements.

• The room hygrometer has an internal sensor for air temperature and humidity which is suitable for continuous monitoring of the room climate. This is how the room hygrometer finds its application in homes or at work.
• With the help of two internally measured parameters, the outside temperature can be measured via the external cable temperature sensor, for example. This temperature sensor can also be used, for example, to measure the temperature of a refrigerator or incubator in the laboratory.
• In addition to the measured values, the room hygrometer records and displays the date and time. The temperature can be switched between °C and °F. In addition, the maximum and minimum measured temperature can be displayed by pressing a button.

• The compact thermo-hygrometer with a large memory (up to a maximum of 16,000 values) is primarily used for long-term registration, for example in the food sector (e.g. refrigerated counters in supermarkets, refrigerated transport, warehouses) or in the industrial sector (heating and cooling processes, machine temperatures, product warehouses…)
•  The values stored in the device are transferred to a PC or laptop and the software evaluates them graphically as a curve. The storage can either be triggered manually or you program the thermo-hygrometer in advance (start and stop time, date and recording rate) to record on site.
• The internal real-time clock with date allows the user to precisely program the events. The storage rate of the thermo-hygrometer is freely adjustable. The compact dimensions allow the thermo-hygrometer to fit almost anywhere. The current measurement can be ended and a new measurement started automatically by pressing the button on the thermo-hygrometer.

• It has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a data logger in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.
• It works as a data logger to record climatological data in spaces with controlled ambient conditions. Data can be transferred to a computer or a laptop via the USB port.
• The software included in the delivery also calculates dew point. The internal clock allows the user to accurately assess the results. One special characteristic of the PCE-HT 71N is that it is powered by a removable 3.6V, long-life lithium battery. The battery life is approximately one year.

• A memory of 20,010 sets of measurements allows the PDF data logger to be used for up to several months. It is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values it automatically generates a measurement protocol that can be printed or saved directly.
• The data logger stores the measured values ​​in its memory until it is full or a new measurement is started via the software. In the software, the user has further options for analyzing the measured data. So it is also possible with the help of the software to export the measurement data as a CSV file from the PDF data logger.

• This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included).
• The PCE-HT110-ICA is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.
• It can be used to monitor climate-controlled environments such as supermarket refrigerators, refrigerated / reefer trucks and cold storage units. It is also useful for monitoring home HVAC systems, wood floor installations, cigar humidors, industrial heating and cooling processes, machine operating temperatures and product storage / warehouse conditions.

• Humidity / Temperature Data Logger Set Quantity of 5 x 2-channel data loggers with real-time LCD displays and SD card memories.
• The PCE-HT110 Humidity Detector can be used to monitor climate-controlled environments such as supermarket refrigerators, refrigerated / reefer trucks and cold storage units. It is also useful for monitoring home HVAC systems, wood floor installations, cigar humidors, industrial heating and cooling processes, machine operating temperatures and product storage / warehouse conditions.
• It is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.

• It has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a data logger in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.
• It works as a data logger to record climatological data in spaces with controlled ambient conditions. Data can be transferred to a computer or a laptop via the USB port.
• The software included in the delivery also calculates dew point. The internal clock allows the user to accurately assess the results. One special characteristic of the PCE-HT 71N is that it is powered by a removable 3.6V, long-life lithium battery. The battery life is approximately one year.

• It has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a data logger in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.
• It works as a data logger to record climatological data in spaces with controlled ambient conditions. Data can be transferred to a computer or a laptop via the USB port.
• The software included in the delivery also calculates dew point. The internal clock allows the user to accurately assess the results. One special characteristic of the PCE-HT 71N is that it is powered by a removable 3.6V, long-life lithium battery. The battery life is approximately one year.

• The PCE-170 A Illuminometer can be used even by inexperienced personnel, with this unit you will be able to perform a professional valuation and can be widely used within the industrial sector.
• For example, it is possible to check light conditions in workplaces, warehouses, industries and apartments with the PCE-170 A Illuminometer. In addition, emergency escape routes can be tested with the PCE-170A Illuminometer for proper illumination. The PCE-170 A Illuminometer is an irreplaceable instrument to prevent occupational hazards and it meets professional standards.
•  The digital PCE-170 A Illuminometer measures in Lux units (lumen/m² or lumen/foot²). This solid and portable unit provides very accurate results and comes with a zero-reset function when it is on.

• Our multifunctional illuminometer PCE-EM 883 combines all important features for measuring the ambient conditions in one device. Thanks to the large number of external sensors that the illuminometer brings with, fast and precise measurements are possible.
• It is also able to detect not only the sound level but also the temperature, the light, the wind speed and the humidity of the environment.
• It allows one-handed operation as it has only eight buttons that are easily accessible. Because our illuminometer is a non-stationary device, it can be made at various locations.

•  Detects R-134a, R-404A, Freon R-407C, R-410A and R-22 (per EN 14624)
• High/low sensitivity per SAE J1627 rating criteria
• Audible and visual alarms
• Easy to use
• Tricolor LED indicator shows the concentration of gas

• Leak detection using sound
• Easy handling and lightweight yet robust design
• Noise-canceling headphones
• Operating time > 10 hours
• Battery charger included and impact-resistant carrying case

• PCE-HVAC 2 is a high-velocity multifunction manometer with a pitot tube. This portable manometer can be used to determine air speed, air pressure, air flow, differential pressure and ambient temperature.
• The pitot tube allows access through tiny openings to take measurements in small pipe systems and other confined spaces.
• Stored measurement values ​​can be called or read out later on the device itself or on the computer. The transfer to a computer works easily via a USB interface. A real-time measurement can also be carried out via this interface.

• Measures temperature, humidity and barometric pressure
• Calculates dew point
• Selectable pressure units: hPa, (mbar), mmHg and inHg

• The Bluetooth differential pressure gauge PCE-BDP 10 is used to quickly and easily check the differential pressure.
• The Bluetooth differential pressure gauge finds its application, for example, in the ventilation and air conditioning technology with the help of a smartphone to measure the gas flow pressure or the static pressure.
• Also, the Bluetooth differential pressure gauge can be used to check for pressure drops. Here is in the app of the differential pressure gauge, a graphical display available. The measurement data can be sent by email for further processing.

• The manometer PCE-HVAC 4 is a versatile measuring instrument for the determination of differential pressure, differential temperature and ambient temperature.
• The measurements of the manometer PCE-HVAC 4 are via measuring terminals, thermocouples and an internally installed NTC sensor.
• The PCE-HVAC 4 differential pressure gauge is often used in the installation and maintenance of refrigeration systems. In particular, the high measuring range up to 34.47 bar is a big advantage of the differential pressure gauge, as most differential pressure gauges do not reach these measuring ranges.

• The differential pressure gauges of the PCE-PDA series are reliable differential pressure gauges for pressure measurement of gases in the range of ± 200 Pa, ± 2kPa and 20 kPa depending on the model.
• The differential pressure gauge has many different pressure measuring functions. This gives the user more than 16 units. Furthermore, the differential pressure gauge measures in addition to the differential pressure, the temperature, flow velocity and volume flow.
• The PCE-PDA differential pressure gauge has a data logger function. This makes it possible to carry out a leak test on pressure lines in addition to the continuous storage of the measured values.

• The relative pressure manometer PCE-PDA 1000L measures the relative pressure on machines and systems. The relative pressure is measured by this pressure manometer in the range between -100 to 2000 kPa.
• The large LCD on the relative pressure manometer continuously visualizes the measured values. It is also possible to freeze the maximum or minimum measured value in the display via the Max-Min-Hold function.
• The PCE-PDA 1000L relative pressure manometer has a data logger. The memory has 1024 memory locations. Recordings of up to 255h can be stored in each memory location.

• The differential pressure gauges of the PCE-PDA series are reliable differential pressure gauges for pressure measurement of gases in the range of ± 200 kPa, ± 2 kPa and 20 kPa depending on the model.
• The differential pressure gauge has many different pressure measuring functions. This gives the user more than 16 units. Furthermore, the differential pressure gauge measures in addition to the differential pressure, the temperature, flow velocity and volume flow.
• The PCE-PDA differential pressure gauge has a data logger function. This makes it possible to carry out a leak test on pressure lines in addition to the continuous storage of the measured values.

• The differential pressure gauges of the PCE-PDA series are reliable differential pressure gauges for pressure measurement of gases in the range of ± 200 kPa, ± 2 kPa and 20 kPa depending on the model.
• The differential pressure gauge has many different pressure measuring functions. This gives the user more than 16 units. Furthermore, the differential pressure gauge measures in addition to the differential pressure, the temperature, flow velocity and volume flow.
• The PCE-PDA differential pressure gauge has a data logger function. This makes it possible to carry out a leak test on pressure lines in addition to the continuous storage of the measured values.

• The differential pressure gauges of the PCE-PDA series are reliable differential pressure gauges for pressure measurement of gasses in the range of ± 200 Pa, ± 2kPa and 20 kPa depending on the model.
• The differential pressure gauge has many different pressure measuring functions. This gives the user more than 16 units. Furthermore, the differential pressure gauge measures in addition to the differential pressure, the temperature, flow velocity and volume flow.
• The PCE-PDA differential pressure gauge has a data logger function. This makes it possible to carry out a leak test on pressure lines in addition to the continuous storage of the measured values.

• The manometer PCE-PDA A100L is suitable for the measurement of the atmospheric pressure. This manometer records the pressure from absolute zero to 200 kPa.
• This professional manometer can either be operated with batteries or rechargeable batteries. In battery mode, the USB interface allows charging of the inserted batteries. A display illumination makes it easier to read the measured values ​​even under poor conditions. The pressure is measured by an internally installed sensor.
• A plug-in nipple is available from the pressure connection. At these, the pressure of air and liquids can be passed through quick couplings to the sensor.
• In addition to the continuous pressure measurement, the display shows the maximum and minimum measured values ​​directly in the display. At the touch of a button, this storage can be reset.

• The Manometer PCE-PDR 10 is a display for measuring pressure. Up to three pressure sensors can be connected to this pressure data logger and synchronously read out and logged. Thanks to the 4 to 20-mA input signal, many different pressure sensors can be connected.
• With the advanced memory interval, measured values ​​can only be stored after a change of ± 10 digits by the pressure data logger. As a result, constant and superfluous measured values ​​are filtered by the pressure data logger. This saves a lot of storage space.
• With the stand, the pressure data logger can be positioned freely at a workstation. Due to the included wall mounting set, the pressure data logger can also be fixed to a wall.

• PCE-PMI 2 is a non-destructive concrete moisture meter or dampness tester that measures the moisture content of concrete and other construction and building materials.
• Featuring a variety of preset characteristic curves based on different material densities, this electronic moisture analyzer enables fast, reliable, noninvasive moisture measurement without damaging the surface.
• For concrete, cement, cork, wood, plaster, rubber and more.

• The moisture meter is a small and reliable measuring instrument for the determination of existing moisture in, for example, concrete and wood. Corresponding scales for measuring moisture are already stored in the library of the moisture meter.
• For each scale in the moisture meter, a separate alarm limit can be stored. As soon as the set alarm limit is exceeded, the moisture meter will sound an audible alarm.
• Another special feature of the moisture meter is the possibility of displaying the calcium carbide method (CM%) for screed. Also in this measurement, the moisture meter is placed on the surface to be tested.

• The moisture meter is a sensor for measuring moisture of sand consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321.
• Our microwave – moisture meter is ideal for installation in tanks with liquid materials such as fuel oil, sludge from cement production, fuels (CWF). Bolt diameter – 12 mm, distance between the central and the surrounding probes – 25 mm. This large distance between the probes ensures high resistance to clogging.
• The top of the sensor serves as a coupling with a female thread, which enables the mounting of the sensor on a pipe with a 33 mm diameter. The cable that connects the sensor and the electronic unit is installed in the airtight tube.

• For industrial continuous production of wood pellets, chips, sawdust and similar materials, in-line moisture measurement for monitoring and controlling the mixing process is important.
• PCE Instruments planar sensors are at a suitable point in the ground or screwed in the wall of the mixer (e.g.pan mixer, screw mixer). It can also be used when other variants or types are used, e.g. for in-line moisture measurement of additives (hopper for sand).
• In combination with a control system (SCADA or DCS) or a real-time moisture measurement sensor control & control unit of PCE Instruments, this is a true control of a sensor for measuring humidity.

• The frequent and important peculiarity which should be considered in any kind of industry and production is that the material used in the production process has got a certain amount of moisture in it.
• It goes not only about bulk materials (such as sand, rubble, ore, gravel etc), but about liquids as well (oil, fuel oil, coal-water slurry fuel (CWSF), petroleum etc). Though all the versions of the moisture meter have got similar structure each versions performs its own function. The device consists of an electronic unit and a sensor.
• All the parameters can be adjusted depending on the needs of the customer. Due to the material the moisture meter is made of the device is resistant to corrosion, abrasive materials, mechanical stress. It also allow suing the sensor for measurements at very high temperatures (145° C).
• Moisture meters for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed.

• There is no need in calibration in advance, as the principle of the device is based on the direct method of permittivity measurement. The measurements can be carried out not only for homogeneous materials but also for materials with fractions (crushed stone, gravel, ore etc). The device is non-nuclear, which is a big advantage.
• For the enterprises dealing with the carbonated concrete rubble the device is irreplaceable. The level of moisture can reach the mark of 8%, almost equal to sand. The general description of the moisture meter structure is the following: an electronic unit and a probe-sensor made of stainless steel.
• The device is resistant to corrosion (stainless steel and dielectric materials) and can operate in the conditions deviating from the norm, for example, at temperatures of 145°C. The moisture meter probe can be mounted on the walls in the hoppers, in pipelines or on trays in conveyors.

• In the industrial production of wood pulp boards (PB, MDF, OSB) or pellets, the on-line measurement of the moisture/density of the wood material is essential to ensure that the processes in production run as efficiently as possible, energy consumption is kept low, and the raw material losses are minimized.
• The use of a microwave moisture meter, as opposed to a humidity sensor, provides a very consistent and high product quality while reducing operating and maintenance costs.
• In the online moisture measurement in production processes, the microwave sensor is valuable in many process stages: in the refining of wood pulp, during resin treatment, during pressing/de-watering and during the final drying.
• Areas of application for the PCE-MWM 300P microwave sensor include fiberboard (PB, MDF, OSB), sawdust, wood shavings, wood lamellae, wood panels, wood pellets and wood chips (incineration).

• The CO2 warning device PCE-WMM 100 consists of a main unit and a remote display. It is used to measure carbon dioxide and oxygen in a fixed location.
• The CO2 warning device protects people from the odorless gas CO2 and also warns of low oxygen content in the air. The gas warning system displays the measured values on an LCD.
• The unit has two relays that can be used to control alarm lights or sounders. Furthermore, the CO2 warning device has an integrated, acoustic alarm, which emits an audio signal of 80 db in the event of an alarm.

• PCE-RCM 10 is a portable handheld particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).
• It can be powered either by the built-in rechargeable battery or the USB port. The USB port also is used to charge the battery. At full charge, the battery provides up to 5 hours of continuous operation or unlimited operation when plugged into a USB power source.
• The particle counter displays all measurements simultaneously on the device’s 2.4″ full-color LCD screen. PM values ​​appear the largest in the colors green, yellow, gold, orange, pink and red. This visual color-coding system makes it easy to recognize when PM concentration levels become dangerous, allowing for quick action.

• The air quality monitor PCE-RCM 11 serves the indicative examination of environmental parameters. The air quality monitor enables the measurement of fine dust, temperature and relative humidity.
• For permanent measurement, the air quality monitor can be connected to the mains via a USB interface. The rechargeable battery will be recharged within two hours if the air quality monitor is turned off.
• In addition to the indicative measurement of formaldehyde, which can be harmful to health, there is also an orienting measurement of particulate matter pollution to be carried out. A distinction is made between particles with a maximum diameter of up to 10 μm (PM10) and particles up to a diameter of 2.5 μm (PM2.5).

• The air quality meter PCE-RCM 16 is ideal for monitoring the air quality in homes, businesses or public buildings where people are staying. The 4.3-inch TFT display on the air quality meter is dimensioned so that all measured values ​​can be read directly.
• Supported measurements on the air quality meter are CO2, TVOC, PM1, PM2.5, PM10, temperature and ambient humidity. On the display of the air quality meter, the measured values ​​are updated every second. As soon as a measured value exceeds the fixed limit, this is visually indicated to the user.
• To power the air quality meter can be operated directly via the micro USB port on the back. The built-in battery with the air quality meter is charged via this interface.

• The multi-function particle counter PCE-RCM 8 performs many measuring tasks. For example, the multi-function particle counter can measure mass concentration, formaldehyde and TVOC.
• This multi-function particle counter is specially designed for indoor measurement. The 320 x 240 pixel display shows you directly the current measured values.
• Due to its ease of use and the large display, this multi-function particle counter is optimally suited for measuring in offices, schools and living spaces. With the help of the data logger function, you can view the last parameters at any time.

• PCE-LED 20 is a photometer with an external LED light sensor. The cable of the sensor has an extended length of approx. 1.5 m / 4.9 ft. Different work or production processes require different lighting conditions.
• By means of various presets, the functions installed in the device can also be activated or deactivated. These functions include the normal HOLD function, in which the measured value is frozen in the display.
• Measurements are possible with the LED lux meter in lux or footcandle. The unit has only seven keys, allowing for one-hand operation. This also makes the instrument simple to use.
• The measuring sensor of the LED lux meter has a large exposure area. For convenience, the sensor is located on a coiled cable that can be extended to full length only when needed. A protective cap on the sensor prolongs its life.

• With the photometer or spectrophotometer PCE-CRM 40, important photometric factors in the field of light measurement can be determined. These include the tristimulus values of XYZ, the u´ and v´ color location coordinates according to CIE 1976, and the xy color location coordinates according to CIE 1931.
• Moreover, further color statistics are measured as absolute values and differences. The user can determine the dominant wavelength within the sensitivity range of the spectrophotometer, which is 360 to 780 nm, as well as the color density (Pe) and the correlated color temperature (CCT) in Kelvin.
• Also, the spectrophotometer can measure the illuminance in lux (lx) or foot-candle (fcd) as well as the light flux in lumens (lm) and show the color location in the RGB color space.

• The differential pressure gauge PCE-P01 is a robust, compact and comprehensive differential pressure gauge for measuring pressure in 11 adjustable units.
• The PCE-P01 is particularly suitable for the complete documentation of your measuring tasks. The minimum, maximum and average values of your measurement can be viewed in parallel to the current measured value on the large display of the PCE-P01 differential meter.
• If you want to determine and document pressure fluctuations, you can use the enclosed software, with the help of which it is possible to transfer the measured values to the computer every second and display them graphically and in tabular form.

• PCE-P05 is a portable handheld digital differential pressure gauge or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems.
• The PCE-P05 displays min / max / average values right on the meter’s screen for comparison against current measurement values.
• In addition, the PCE-P05 differential pressure manometer features real-time data-logging capabilities with an adjustable interval from 1 second to 24 hours.
• The device comes with 4 x 30 cm / 11.81 in silicon tubes, 1 x 9V block battery and 1 x AC power adapter. Also included in the delivery contents are PC-compatible software and a USB cable.

• The differential pressure gauge is ideal for use in industry, in service and in the laboratory. The device is particularly suitable for measuring non-corrosive media. The overload protection is twice the measuring range.
• The 9 units that can be shown on the display make this differential manometer universally applicable for the practitioner on site and saves laborious conversion of the measurement results (conversion table of the pressure units).
• The software for data transfer and the interface cable can optionally be ordered as a package. The differential manometer is connected to the PC with the RS-232 cable. The software is installed from the CD.

• The differential pressure gauge is ideal for use in industry, in service and in the laboratory. The device is particularly suitable for measuring non-corrosive media. The overload protection is twice the measuring range.
• The 9 units that can be shown on the display make this differential manometer universally applicable for the practitioner on site and saves laborious conversion of the measurement results (conversion table of the pressure units).
• If you want to transfer the measurement data from the differential manometer to the computer, you need the optional software and the RS-232 interface cable. The software runs in conjunction with the Windows® versions 95, 98, 2000 and ME/XP
• The software for data transfer and the interface cable can optionally be ordered as a package. The differential manometer is connected to the PC with the RS-232 cable. The software is installed from the CD.

• The differential pressure gauge is ideal for use in industry, in service and in the laboratory. The device is particularly suitable for measuring non-corrosive media. The overload protection is twice the measuring range.
• The 9 units that can be shown on the display make this differential manometer universally applicable for the practitioner on site and saves laborious conversion of the measurement results (conversion table of the pressure units).
• If you want to transfer the measurement data from the differential manometer to the computer, you need the optional software and the RS-232 interface cable. The software runs in conjunction with the Windows® versions 95, 98, 2000 and ME/XP
• The software for data transfer and the interface cable can optionally be ordered as a package. The differential manometer is connected to the PC with the RS-232 cable. The software is installed from the CD.

• PCE-910 is a portable handheld digital differential pressure meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems.
• The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.
• The PCE-910 differential pressure manometer comes with 1 x 1 m / 3′ long silicon tube, 2 x stainless steel tube adapters and 1 x 9 V block battery.
• Optional PC software with RS-232 cable sold separately as a data transfer accessory. The software can be used to transmit the data to a computer for evaluating, documenting and storing pressure fluctuations.

• PCE-917 is a portable handheld digital differential pressure meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems.
• The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.
• The PCE-917 differential pressure manometer comes with 1 x 1 m / 3 ft long silicon tube, 2 x stainless steel tube adapters and 1 x 9V block battery.
• Optional PC software with RS-232 cable sold separately as a data transfer accessory. The software can be used to transmit the data to a computer for evaluating, documenting and storing pressure fluctuations.

• PCE-932 is an easy-to-use, digital, handheld device for high pressure measurement in hydraulic and compressor systems, pumps, tanks and silos in chemical, manufacturing, plastics and HVAC industries.
• This portable pressure measuring device can be connected to pressure sensors with ranges up to 400 bar (each with a 1.2 m / 3.9 ft connecting cable).
• Measurement values are stored in a Microsoft Excel-compatible format to the included SD card memory.
• PCE-932 comes calibrated from the factory, but an ISO calibration certificate may be obtained for an additional fee.

• The multifunction psychrometer or diagnostic measuring device is used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F).
• Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the psychrometer. Measurements of relative humidity and ambient room / dry-bulb temperature are made directly by built-in sensors. Dew-point and wet-bulb temperatures are calculated based on the measurement values transmitted ​​by the sensors.
• Featuring a large, backlit display and six-button operation, the psychrometer is both easy to read and easy to use. The meter is equipped to take one-time measurements on the spot as well as to monitor climate changes over time.

• This psychrometer is a combination digital hygrometer and digital thermometer used to measure relative humidity or air humidity as well as air temperature, dew point temperature and wet-bulb temperature.
• This portable, handheld psychrometer allows for quick and easy detection of environmental conditions.
• Applications include monitoring climates of refrigerated trucks, warehouses, construction sites and HVAC installations, where excess moisture, condensation and uneven temperatures can create mold, spoilage and health hazards.

• This phase rotation meter PCE-PI1 has a robust housing with a large LCD display so you can easily and conveniently determine the phase and motor rotation direction.
• Furthermore, any problems in individual phases are shown on the display of the phase rotation meter. The phase rotation meter meets the safety standard CAT III 600 V, IEC-61010.
• The phase rotation meter is ideal for determining the phase rotation in all areas where three-phase power supplies are used to feed motors, drives and electrical systems. The phase rotation meter has a voltage range of up to 690 VAC.

• The decibel meter PCE-318 detects the volume from a sound level of 26 dB (A). The meter is ideal for measuring very low noises, for example, noises from computer fans.
• The class II noise meter with jumbo display (and at a very good price / performance ratio) is ideal for measurements of sound and noise in different environments, at work, condition monitoring, etc.
• Also known as the phonometer, this device is designed to IEC 651 Type II and has a very high accuracy of ± 1.5 dB. Another advantage of this meter is the analogue output. This allows the connection of an external data logger / recorder for long-term recording.

• The sound level meter is a sound meter with an adjustable measuring range of 30 … 130 dB. The measured values ​​are displayed on the sound level meter as a normal numerical value and also graphically in the measuring range set by the user.
• A special feature of the sound level meter is the measurement function LEQ (equivalent continuous sound level) in addition to the normal sound measurement. This measurement function is a globally recognized measure of the average sound exposure, taking into account the duration, frequency and intensity of the individual sound events.
• In addition to sound measurement, the sound level meter can also be connected to a process interface. The sound level meter generates a linear voltage signal of up to 2.5V.

• This portable high-accuracy sound level meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time. Thanks to octave band filtering, even the slightest difference in frequency is detected.
• The handheld meter also functions as a data logger, recording measurements at an adjustable interval from 1 s … 24 h and storing the recorded measurement data to a micro SD card memory.
• This device measures from 25 … 136 db(A) at a frequency of 20 Hz … 12.5 kHz. The meter features A, B, C and Z frequency weightings as well as fast, slow and impulse time weightings.

• The outdoor sound level meter PCE-428-EKIT is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The sound level meter is a class 2 device and is equipped with an octave band frequency filter.
• Optionally, the sound level meter PCE-428-EKIT can be upgraded with a 1/3 octave band filter. In addition to the numerical display of the measured value, a graph can show the course of the sound level. The sound level meter has different frequency ratings such as A, B, C and Z.
• Furthermore, the sound level meter can measure with the time estimates Fast, Slow, Pulse and Peak. The measuring range of the sound level meter ranges from 25 … 136 dbA at a frequency of 20 Hz … 12.5 kHz.

• his portable high-accuracy sound level meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time. Thanks to octave band filtering, even the slightest difference in frequency is detected.
• The handheld meter also functions as a data logger, recording measurements at an adjustable interval from 1 s … 24 h and storing the recorded measurement data to a micro SD card memory.
• This device measures from 22 to 136 db(A) at a frequency of 3 Hz to 20 kHz. The meter features A, B, C and Z frequency weightings as well as fast, slow and impulse time weightings.

• This portable high-accuracy sound level meter is equipped with GPS functionality, allowing measured values to be assigned to an exact geographic location.
• The meter has a large easy-to-read illuminated LCD screen that displays the sound pressure level (SPL) numerically and graphically in real time. Thanks to octave band filtering, even the slightest difference in frequency is detected.
• The handheld meter also functions as a data logger, recording measurements at an adjustable interval from 1 s … 24 h and storing the recorded measurement data to a micro SD card memory.
• This device measures from 22 … 136 db(A) at a frequency of 3 Hz … 20 kHz. The meter features A, B, C and Z frequency weightings as well as fast, slow and impulse time weightings.

• The dB display PCE-SLM 10 is suitable for the continuous measurement and visualization of the sound pressure level.
• The PCE-SLM 10 dB display is used in schools, open-plan offices, bars, clubs and other event venues. Due to the large digits of the dB display, the measured value is always easy to read.
• Due to the LED display, this is also possible in dark environments without any problems. The dB display is powered by USB with the optional AC adapter or external battery pack.
• The measuring range of the dB display ranges from 30 … 130 dB. The sound level meter displays the measured value A weighted. The time weighting of the dB display is always Fast.

• PCE-SLT is a class II (type 2) sound level, sound pressure level (SPL), decibel (dB) or noise meter with audible or visual alarm output capability.
• PCE-SLT is used for long-term, continuous monitoring of occupational noise exposure limits in industrial environments such as foundries, factories and manufacturing production floors.
• The measuring device consists of a wall-mountable acoustic sensor on a 1.5 m / 4.92′ long cable and a transmitter.
• IP 54 ingress protection rating on transmitter offers limited protection against dust ingress (no harmful deposit) and protection against splashed water from any direction
• IP 65 ingress protection rating on digital indicator offers total protection against dust ingress and protection against low-pressure water jets from any direction. Limited ingress permitted.

• PCE-SLT-TRM is a class II (type 2) sound level, sound pressure level (SPL), decibel (dB) or noise meter with audible or visual alarm output capability.
• PCE-SLT-TRM is used for long-term, continuous monitoring of occupational noise exposure limits in industrial environments such as foundries, factories and manufacturing production floors.
• The measuring device consists of a wall-mountable acoustic sensor on a 1.5 m / 4.92′ long cable and a transmitter.
• IP 54 ingress protection rating on transmitter offers limited protection against dust ingress (no harmful deposit) and protection against splashed water from any direction.

• The Decibel Meter consists of a measuring microphone with a handle and a wall bracket on a 1.5 m cable, a sound transmitter. 
• The main area of ​​application of this Decibel Meter is in the continuous sound measurement and sound monitoring of factory halls, production rooms and at large events (discotheques, folk festivals, cart tracks …).
• The analog output signal can also be used to control window flaps … or the signals from the transmitter can be saved, evaluated and documented on a logger. The Decibel Meter is very easy to connect and can be operated via 24 V DC.

• The SPL Meter PCE-MSL 1 is a simple sound measuring device. The SPL meter PCE-MSL 1 is used to quickly determine the ambient volume. In addition to the volume measurement, the decibel meter also has the facility to determine the ambient temperature.
• The measurement of background noise is important in almost every situation today. For this purpose it is helpful to use a simple decibel meter that gives the user an initial idea about the possible noise level.
• The LC display gives clear results of the measurements made by the sound level meter. A backlight is also integrated into the display. The sound level meter is especially ideal for measurements that need to be non-stationary.

• PCE-T236 is a digital handheld tachometer or rotation meter for both contact and non-contact measurement. This tachometer measures rotation speed as well as linear or surface speed, displaying units in rpm, m/min or ft/min.
• The tachometer features an integrated laser and includes a mechanical attachment with contact probes, making it the ideal measuring instrument for machines, motors, conveyor belts and other moving parts.
• Non-contact measurements are taken with the help of laser-reflective tape that is fixed on the moving part. Contact measurements are taken using the mechanical attachments.

• The PCE-AT 5 condition monitoring rotation meter is a portable compact device used to measure revolutions per minute (rpm) in one-cylinder two-stroke and eight-cylinder four-stroke combustion engines with electric ignition starters.
• The PCE-AT 5 handheld automotive ignition-tachometer features an easy-to-read, backlit digital LCD display and flashlight functionality for low-light applications. When the inductive clip is placed on the ignition cable, revolutions are measured quickly and easily.
• Compatible with motorcycles, cars, trucks and more, the PCE-AT 5 rotation meter is a versatile tool for use in garages, repair shops, factories and research and development (R&D) laboratories alike.

• The pistol gauge PCE-DT 50 in the form of a pistol is ideal for quick control of speeds. This hand-held tachometer measures the rotational speed of moving objects, such as shafts, drives, pinions, etc.
• The hand tachometer uses a laser that emits light and a receiving diode that detects the light-dark contrast of the reflected light. The hand tachometer measures the speed in the range of 2.5 … 99,999 rpm (RPM).
• The speed is shown on the illuminated display of the tachometer. The measuring distance from the hand tachometer is 50 … 500 mm / 2 … 19.7 in.
• The handheld tachometer has 2 different measuring modes available: a manual measuring mode and an automatic measuring mode. In manual measurement mode, the hand tachometer measures as long as the trigger is pressed.

• PCE-DT 65 is a digital handheld tachometer, or rotation meter, that can take both contact and non-contact measurements of rotation speed and linear speed.
• This handheld tachometer features an integrated laser and includes a mechanical attachment with contact probes, making it the ideal measuring instrument for machines, motors, conveyor belts and other moving parts.
• Non-contact measurements are taken with the help of laser-reflective tape that is fixed on the moving part. Contact measurements are taken using the included mechanical attachment and contact probes.

• The PCE-LES 100 LED Tachometer combines LED technology with compact and accurate electronics, which controls the sequence and timing of flash over the entire measuring range.
• Thanks to LED technology, the LED Tachometer does not need to periodically change the bulbs.
• The LED handheld stroboscope is ideal for non-contact measurements and to visualize movements on machinery and equipment, giving the viewer the impression that the object is stationary.
• The LED handheld stroboscope can be used for a variety of purposes, where it is important to make very fast movements visible (e.g. vibration), due to its wide frequency range and the different lengths of flash.

• The tachometer PCE-T 238 is a battery-powered hand-held device that allows mobile use. The handheld tachometer can perform a contact measurement as well as a non-contact measurement. It is also possible to perform a measurement of the surface velocity.
• The handheld tachometer allows a measurement of up to 99,999 revolutions per minute. This measuring range is possible with contactless measurements with the optical tachometer.
• With the contact measurement, values up to 19,999 revolutions per minute can be determined, and the measurement of the surface speed offers the possibility of determining speeds of up to 1999.9 meters per minute.

• PCE-313A is a combination thermometer hygrometer used to measure the relative humidity (% RH) and temperature (°C / °F) of the air. Ideal for use in evaluating heating, ventilation and air conditioning (HVAC) system performance, this digital thermo-hygrometer also has a port for connecting a type-K thermocouple.
• The thermo hygrometer features a built-in data logger capable of recording humidity and temperature measurement data at an adjustable sampling rate in direct mode or permanently in data logging mode.
• The device also comes with an SD card memory of up to 16 GB to enable long-term data acquisition as well as quick and easy transfer of the stored data to a PC for analysis via Microsoft Excel (.xls files saved to SD card).

• The CO2 measuring device PCE-CMM 10 is a multi-function measuring device for measuring the air quality. This CO2 meter measures synchronously the CO2 concentration, the air temperature and the humidity.
• In addition, the CO2 meter has permanently programmed alarm limits. As soon as the currently measured CO2 measured value exceeds the alarm limit, the alarm is activated. The user is alerted to the CO2 meter by an audible and visual signal.
• Using the built-in USB interface, you can continuously charge the CO2 meter to your PC workstation, for example. Thanks to the small blue shape, you can optimally position the CO2 meter at your workplace.

• The CO2 Analyzer is a CO2 measuring device for desktop use. The carbon dioxide meter measures the CO2 content in the air and shows the measured value on a large LC display.
• The CO2/carbon dioxide measuring device shows the air quality as a numerical measured value and as a traffic light indicator. At the push of a button, the CO2 content of the last five hours can be shown on the display.
• In addition to the CO2 measuring function, the CO2/carbon dioxide measuring device is equipped with a sensor for temperature and humidity.
• The sensors for monitoring the air quality are subject to different requirements than those in industrial or scientific laboratory use. The focus is therefore on sensor properties such as high long-term stability, low maintenance and low energy consumption.

• The thermometer PCE-HT 112 is compact, very small and equipped with a display. The thermometer PCE-HT 112 records the temperature and humidity inside with its integrated sensor and simultaneously displays it via the LCD display.
• The thermometer PCE-HT 112 can store up to 25,920 measured values, which can be evaluated with the aid of the software. To establish a connection to a PC, the thermometer has a USB interface.
• The software can also set alarms for high or low temperatures. It is also possible to switch over to the optionally available external sensor via the software.

• The thermometer PCE-HT 114 has a temperature and humidity sensor on 2 m/6.6 ft cable. The PCE-HT 114 thermometer records the temperature and humidity in the interior of the refrigerator and simultaneously displays it via the LCD display.
• The thermometer PCE-HT 114 stores the measured values ​​in a format that is used by the software for analysis as well as in PDF format. The thermometer has a base and a mounting tab on the back. The display can be switched off for battery saver.
• The PCE-HT 114 thermometer can store up to 25,920 readings, which can be evaluated using the software. To connect to a PC, the thermometer has a USB port. The software can also set alarms for high or low temperatures.

• The psychrometer is used to simultaneously measure humidity, temperature and surface temperature. This psychrometer is ideal for detecting heat bridges and incorrect ventilation behavior in homes, houses, etc.
• The psychrometer has two sensors for this application. The infrared temperature sensor measures the surface temperature in the range of -50 … 550°C / -58 … 1022°F. The internal sensor for the air temperature works in the range between -45 and 60°C / -49 … 140°F. The humidity is measured by the psychrometer between 0 … 100% RH.
• The measured values ​​are displayed on a colored LCD. In addition to the visualization of the measured value, the user is visually informed when exceeding or falling below a previously set alarm.

• The thermometer records the air temperature as well as the relative humidity and the barometric pressure and saves them internally on an SD card.
• The compact device with a large memory (up to max. 16 GB SDHC card) is primarily used for long-term registration in the food sector (refrigerated counters in department stores, refrigerated transports, warehouses) and for measurement and recording in industry (heating and cooling processes, machine temperatures, product storage).
• The values ​​recorded in the data logger function can of course also be transferred back to the PC and evaluated (.xls file on the SD card). The electronics of the data logger are protected against impacts and robust handling in industry.

• PCE-WM1 is a multi-function environmental meter used to determine relative humidity (% RH), absolute humidity (g/m³), air temperature, dew-point temperature and surface temperature (°C). This Metric-only measuring instrument comes complete with an external sensor probe for taking the surface temperature of different materials.
• This device is used extensively in the construction industry to evaluate building materials and working conditions. It is also used in the food industry to ensure product quality and freshness.
• In addition, heating, ventilation and air conditioning (HVAC) technicians trust this meter to perform HVAC system performance audits.

• The sound calibrator is a battery powered sound source. With the sound calibrator, direct and fast calibrations of sound level meters and other systems for noise measurement can be carried out.
• Sound level sensors of 1, ½ and ¼ inch can be connected to the sound calibrator and checked via the adapter attachments. The calibration frequency for the sound calibrator is 1000 Hz.
• This is the reference frequency for the internationally standardized evaluation curves. With this sound calibrator you can calibrate sound measuring devices with weighting filters A, B, C, or D. The calibration pressure for this sound calibrator is 94 ± 0.3 dB (1 Pa) and 114 ± 0.3 dB (10 Pa).

• PCE-SC 42 is a class 2 acoustic or sound calibrator used to calibrate sound level meters, microphones and noise measuring devices and equipment.
• Suitable for use with type 2 or class II SPL meters, this portable decibel (db) meter calibrator is easy to use in the field or the laboratory.
• Lightweight yet rugged design
• Enables re-calibration or correction of sensor drift over time

• PCE-330 is a climate meter with a quick-response sensor for measuring ambient temperature and relative humidity. This multipurpose handheld device also determines dew point temperature.
• Equipped with an easy-to-read dual display, this multifunction data-logging indoor air quality (IAQ) meter features a large internal memory with storage for up to 16,000 recorded values.
• Using the included Windows-compatible software and USB cable, the recorded data can be transferred to a PC for further analysis and is well suited for long-term IAQ monitoring and environmental data acquisition.

• PCE-444 is a combination digital hygrometer and digital thermometer used to measure air temperature, relative humidity, dew point temperature and wet bulb temperature.
• This portable handheld pocket-sized mini thermo-hygrometer allows for the quick and easy determination of indoor ambient environmental conditions.
• Applications include monitoring climates of refrigerated trucks, warehouses, construction sites and HVAC installations, where excess moisture, condensation and uneven temperatures can create mold, spoilage and health hazards.

• This cup vane Air Flow Meters system is so sensitive that it responds to the smallest of air currents.
• Different measurement units can be selected with the PCE-A420 cup vane Air Flow Meter: m/s, km/h, knots, ft/min and mph.
• You can save the unit in the memory of the PCE-A420 cup vane Air Flow Meter to be displayed every time the meter is turned on. If the messages Hold or REC appears in the display, you cannot change the measurement units.

• Ideally used on flat surfaces, the brightness tester / whiteness color meter features an easy-to-read liquid crystal display (LCD) screen.
• The device determines the brightness level by measuring the intensity of the light reflection diffused on a scale of 100.
• The level of brightness of an absolutely black surface is defined by the meter as 1.
• Measures the whiteness degree of blue light (Wb = R457)

• The grain moisture meter PCE-GMM 10 is a compact moisture analyzer for up to 17 different cereals.
• This grain moisture meter is an important tool in mills, granaries or in processing industries of cereals and legumes.
• The cereal moisture meter helps to protect against storage, processing, or buying and selling the bulk material before spoiling.
• The garden moisture meter requires only a very small sample volume to measure the moisture content.

• Modes of operation: Measurement and printing of data, printing of data in tables,measurement time intervals over a long duration, readings transferred to a computer
• Thermometer for up to 1200 readings
• Possibility to designate 99 measurement positions

• 12-channel datalogger for temperature (°C / F)
• Compatible with 6 different types of thermocouples
• Indication of maximum and minimum values
• Accommodates up to 16 GB SD memory card to save measured data
• Automatic temperature compensation (ATC)

• 4-digit LED display
• Max. 1 KHz measurable
• Display of the pulses per revolution
• Adjustable divider
• Dimensions according to DIN

• Measuring range ±32 m/s
• USB-C interface for data transfer
• Reproducibility ±0.5 % of measured value
• Data memory for 10 million measuring points

• Measuring range ±32 m/s
• USB-C interface for data transfer
• Reproducibility ±0.5 % of measured value
• Data memory for 10 million measuring points
• Individually adjustable alarm limits

• Measuring range ±32 m/s
• USB-C interface for data transfer
• Reproducibility ±0.5 % of measured value
• Data memory for 10 million measuring points
• Individually adjustable alarm limits

• Measuring range ±32 m/s
• USB-C interface for data transfer
• Reproducibility ±0.5 % of measured value
• Data memory for 10 million measuring points
• Individually adjustable alarm limits

• Measuring range ±32 m/s
• USB-C interface for data transfer
• Reproducibility ±0.5 % of measured value
• Data memory for 10 million measuring points
• Individually adjustable alarm limits

• Max. 1 KHz measurable
• Display of the pulses per revolution
• Adjustable divider
• Screw connections
• Dimensions according to DIN

• Max. 1 KHz measurable
• Display of the pulses per revolution
• Adjustable divider via buttons
• Screw connections
• Dimensions according to DIN

• Measuring range ±32 m/s
• USB-C interface for data transfer
• Reproducibility ±0.5 % of measured value
• Data memory for 10 million measuring points
• Individually adjustable alarm limits

• Large 7″ TFT touch display, Clear display
• Heating temperature up to +400 °C
• Pre-set materials
• Robust metal housing
• Various weights included

This product has been discontinued by the manufacturer.
Alternate products: TDS 200 M, TDS 200 S, TDS 200 SM.

• Ideal for retrofitting, Installation without process interruption
• Accurate and reliable
• No pressure loss
• Maintenance-free, no moving parts
• Portable devices for control measurements

This product has been discontinued by the manufacturer.
Alternate products: TDS 200 M, TDS 200 S, TDS 200 SM.

• Ideal for retrofitting, Installation without process interruption
• Accurate and reliable
• No pressure loss
• Maintenance-free, no moving parts
• Portable devices for control measurements

This product has been discontinued by the manufacturer.
Alternate products: TDS 200 M, TDS 200 S, TDS 200 SM.

• 0.5% linearity, 0.2% repeatability
• Bi-directional flow measurement, Quick and adjustable response time, Eliminates interfering frequencies
• Auto power-off battery-saving function (can be disabled)
• Saves time- and date-stamped measurement data to internal memory
• Rechargeable, battery-operated flow measuring device

• Working frequency of 40 kHz
• Up to 6 h battery operation
• Leak detection via headphones and LCD display
• Robust and ergonomic
• Easy to use and can be used over long distances

• Flowmeter for fixed installation
• Different outputs for process connection
• For fixed installation
• For pipe diameters 25 to 1200 mm / 1 in to 47.2 in
• The flow velocity is calculated using the transit-time principle

This product has been discontinued by the manufacturer.

• TDS-M1 is a set of replacement transducers for PCE-TDS 100H or an additional sensor for the PCE-TDS 100HS.

This product has been discontinued by the manufacturer.

• TDS-S1 is a set of replacement transducers for PCE-TDS 100H or HS.

This product has been discontinued by the manufacturer.

• Media temperature -30 to160 °C suitable for ultrasonic flow meter PCE-TDS 100H

This product has been discontinued by the manufacturer.

• Suitable for PCE-TDS 100H and PCE-TDS 100HS

This product has been discontinued by the manufacturer.

• Suitable for PCE-TDS 100H and PCE-TDS 100HS.