PCE Instruments P15 Differential Pressure Manometer 0 to 15 psi

Model # P15

The differential pressure gauge is ideal for use in industry, in service and in the laboratory. The device is particularly suitable for measuring non-corrosive media. The overload protection is twice the measuring range.
The 9 units that can be shown on the display make this differential manometer universally applicable for the practitioner on site and saves laborious conversion of the measurement results (conversion table of the pressure units).
The software for data transfer and the interface cable can optionally be ordered as a package. The differential manometer is connected to the PC with the RS-232 cable. The software is installed from the CD.

BrandPCE Instruments
Model NumberP15

ADD TO MY RFQ LIST Add to your requistion list to get a quote.

Here you can see a professional differential pressure gauge with the highest accuracy and best performance. With this differential manometer you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The differential pressure gauge is ideal for use in industry, in service and in the laboratory. The device is particularly suitable for measuring non-corrosive media. The overload protection is twice the measuring range. The 9 units that can be shown on the display make this differential manometer universally applicable for the practitioner on site and saves laborious conversion of the measurement results (conversion table of the pressure units).
If you want to transfer the measurement data from the differential manometer to the computer, you need the optional software and the RS-232 interface cable. The software runs in conjunction with the Windows® versions `95,` 98, `2000 and ME / XP (short info: pressure measuring device with interface). The principle of absolute and differential pressure measurement is explained if you follow the link below: Principle of absolute and differential pressure measurement. DIN ISO 9000 calibration certificates for the pressure gauges and corresponding accessories are also available.
The software for data transfer and the interface cable can optionally be ordered as a package. The differential manometer is connected to the PC with the RS-232 cable. The software is installed from the CD. The pictures below give you an optical impression of the software. The differential manometer transmits the respective measured values online to the PC.
The values determined on the differential manometer are plotted directly on the y-axis. The differential pressure values are indicated with “-” in a field below the graphic (visible on the top left picture (in the red circle)). The measuring units can be changed to the desired unit both on the differential manometer and in the software. All measured values are written in a data file and can be saved under any name on the hard disk of the computer. Many customers also transfer the values to e.g. MS Excel for further analysis.
9 selectable units
Digital display of over, under (vacuum) or differential pressure
Min / Max memory
Data hold function
Backlit LCD display
Impact-resistant ABS housing
Auto-power-off function

	Parameter	Max. Pressure
Pressure Meter	positive/ negative or overpressure / vacuum	30 psi
PSI	Range	0 to ±15
PSI	Resolution	0.01
mbar	Range	0 to ±1000
mbar	Resolution	1
inH20	Range	0 to ±415
inH20	Resolution	0.3
inHg	Range	0 to ±30.5
inHg	Resolution	0.005
mmHg	Range	0 to ±750
mmHg	Resolution	0.5
kPa	Range	0 to ±100
kPa	Resolution	0.1
cmH20	Range	0 to ±1050
cmH20	Resolution	1
Kg/cm²	Range	0 to ±1.05
Kg/cm²	Resolution	0.001

Data format	Baud rate: 2400 baud,1 stop bit, 8 data bits
Accuracy	±0.3 % (full range, @ +25°C / +77°F)
Repeatability	±0.2 % (max. ±0.5 % of full scale)
Duration	0.3 ms
Operating temperature max	+50 °C / +122 °F
Battery	1 x 9 V – block battery PP3
Dimensions	182 x 72 x 30 mm / 7.1 x 2.8 x 1.1″
Weight	150 g / 5.3 oz