PCE Instruments AQD 10 CO2 Datalogger Analyzer

Model # AQD 10

The CO2 data logger PCE-AQD 10 is used to measure air quality. It measures carbon dioxide, temperature and humidity.
The CO2 sensor from the unit is separated from the main unit with a connection cable. The measured values are displayed on the large display of the data logger.
The air quality measurement data is stored on an SD card and can set the measured data in adjustable intervals of 1 to 600 seconds.
The unit is used to monitor indoor air quality in lounges, offices, schools, etc. Through the SD memory, the CO2 measurement data can be monitored over a long period of time to initiate further measures to improve the room air quality.

The CO2 data logger PCE-AQD 10 is used to measure air quality. It measures carbon dioxide, temperature and humidity.
The CO2 sensor from the unit is separated from the main unit with a connection cable. The measured values are displayed on the large display of the data logger.
The air quality measurement data is stored on an SD card and can set the measured data in adjustable intervals of 1 to 600 seconds.
The unit is used to monitor indoor air quality in lounges, offices, schools, etc. Through the SD memory, the CO2 measurement data can be monitored over a long period of time to initiate further measures to improve the room air quality.
Memory on SD card
3 parameters of air quality
CO2, air temperature and humidity
Mains operation, A/C power adapter
Save as .XLS file
Large display with lighting

Storage rate	1, 2, 5, 10, 30, 60, 120, 300, 600 seconds
Storage	SD card up to 16 GB
Display	LCD with lighting
Refresh rate display	1s
Power supply (for time back-up only)	6 x 1.5V AA battery
Power supply (Plug-in)	9V / 800-mA
Operating conditions	0 to 50°C / 32 to 122°F, <85% rh
Dimensions (Main unit)	132 x 80 x 32 mm / 5.2 x 3.1 x 1.3 in
Dimensions (CO2 Sensor)	132 x 38 x 32 mm / 5.2 x 1.5 x 1.3 in
Weight (with battery)	Approx. 390 g / < 1 lb