PCE Instruments GA 10 Gas Leak Detector for Flammable Gases

Model # GA 10

The gas leak detector PCE-GA 10 is used to check for leaks in gas pipes and connections. This gas leak detector is suitable for many flammable gases. The gas leak detector has 5 LEDs that inform the gas intensity. In addition to the visual information, the gas leak detector has an audible and haptic alarm. This means that, depending on the level, the gas leak detector emits an alarm tone and vibrates at the same time.
The leak detector is therefore ideal for detecting sporadic gases. The gas leak detector is therefore of great help to employees who want to inspect plants during a plant tour or inspect engines, supply lines or gas lines. The gas leak detector is supplied with a rechargeable battery. The sensor of the gas leak detector has an average life of approx. 5 years and can be exchanged without any problems.
LED display
For flammable gases
500 mm / 19.6″ sensor
Optical, acoustic and haptic alarm
Fast response time
Rechargeable batter

Testable gases	Acetaldehyde, Ammonia, Benzene, Ethan, Ethanol, Ethylene, Formaldehyde, Hexane, ISO-butane, Methane, Propane, P-xylene, Hydrogen sulfide, Toluene, Hydrogen and compounds in which these gases occur
Measuring range (methane)	0 to 10000 ppm
Sensitivity (methane)	< 50 ppm
Display stages (High)	100 / 400 / 700 /1000 ppm
Display stages (Low)	1000 / 4000 / 7000 / 10000 ppm
Response time	< 2 s
Heating time	ca. 50 s
Alarm types	Optical, acoustic, haptic
Power supply	3.7V Li-ion battery
Lifetime sensor	On average, 5 years
Sensor length	500 mm / 19.6 in
Dimensions	211 x 70 x 45 mm / 8.3 x 2.7 x 1.7 in
Weight	ca. 400 g / < 1 lb