PCE Instruments ADL 11 Anemometer

Model # ADL 11

The anemometer PCE-ADL 11 is a data logger for wind speeds. The configuration on the wind measuring device is carried out via the supplied software and provides multiple settings for measurement.
The wind meter measures various parameters. These include m/sec, km/h, knots, mph and ft/min. In addition to the measurement parameters, the measurement intervals can be set on the software by the wind measuring device.
The data logger function accommodates 60,000 measured values. After completing the series of measurements, the data from the wind gauge can be read out on the computer via the software.

The anemometer PCE-ADL 11 is a data logger for wind speeds. The configuration on the wind measuring device is carried out via the supplied software and provides multiple settings for measurement.
The wind meter measures various parameters. These include m/sec, km/h, knots, mph and ft/min. In addition to the measurement parameters, the measurement intervals can be set on the software by the wind measuring device.
The data logger function accommodates 60,000 measured values. After completing the series of measurements, the data from the wind gauge can be read out on the computer via the software.
The measurement results are displayed as either graphically as a curve or in tabular form.The impeller installed on the wind gauge already responds to low flow velocities. In this case, the wind meter can be fixed by means of a mounting device.
There is a threaded hole on the bottom of the wind gauge, so you can attach the unit firmly to the mounting bracket.
Configuration via the software
Easy to use
Direct-reacting, smooth-running impeller
Various measuring units selectable
Evaluation on the PC (graphic representation)
Alarm when limit value exceeded
Measurement memory for up to 60,000 values

Indication (Digital/Analogue)	Digital
Measurement air speed (Y/N)	Y
Measurement volume flow (Y/N)	N
Measured value memory (Y/N)	N
Interface (Y/N)	Y
Measuring modes	Automatic and manual start of the measurement
Sensor	Anemometer
Power supply	Lithium Thionyl Chloride Battery, 3.6V Mignon
Alarm at low battery voltage	Yes
Operating conditions	0 – 50°C / 32 – 122°F, <80% relative humidity
Max. Height above sea level	2000 m / 6561 ft
Weight	49 g / < 1 lb
Dimensions	145 x 35 x 30 mm / 5.7 x 1.4 x 1.2 in