AABTools | PCE Instruments | Moisture Meters

PCE Instruments PMI 4 - Moisture Meter with Eight Spring Electrodes

PCE Instruments - Moisture Meter with Eight Spring Electrodes Model # PMI 4

The moisture meter is a measuring device for non-destructive moisture measurement on concrete and screed. Here, the spring electrodes of the moisture meter are pressed onto the surface to be tested.
Within seconds, the moisture meter will show the moisture content to the operator. Different scales are already stored in the moisture meter for a wide variety of surfaces. These are available to the operator directly from the moisture meter.
As another special feature, the moisture meter has an automatic shutdown. This feature automatically shuts off the meter if the moisture meter is not used for 5 minutes.

PCE Instruments SMM 1 - Absolute Moisture Meter for Soil – 10in

PCE Instruments - Absolute Moisture Meter for Soil – 10in Model # SMM 1

It is a damp meter for soil ideal for use in agriculture, crop science, horticulture, botany, landscaping, gardening and environmental testing applications.
This portable handheld damp meter measures soil moisture or humidity quickly, easily and accurately.
The meter’s compact size and battery power supply make it the ideal solution for taking moisture measurements in the field.
A water-resistant ABS plastic housing protects the electronic components of the meter from inclement weather and adverse operating conditions.

PCE Instruments MMK 1 - Multi-function Moisture Meter

PCE Instruments - Multi-function Moisture Meter Model # MMK 1

PCE-MMK 1 is a portable handheld digital moisture meter used to measure the moisture content of wood, paper, textiles, concrete and other building materials. This multi-function environmental meter also measures ambient temperature and ambient relative humidity.
Ideal for quality control and incoming goods inspections, this multipurpose moisture analyzer comes with short and long insertion needles as well as 3 different external electrodes (ramming, penetrating, paper).
Self-test or pre-set measuring modes based on material type are available from the user friendly navigation menu, as are temperature compensation, maximum / minimum value, LCD back-light and dry-moist-wet indicator settings.
An easy-to-read display shows digital and bar graph values on screen. Moisture % displayed is material moisture with respect to dry mass (e.g., 100 % material moisture for 1 kg of wet wood = 500 g water).

PCE Instruments PMI 2 - Concrete Moisture Meter

PCE Instruments - Concrete Moisture Meter Model # PMI 2

PCE-PMI 2 is a non-destructive concrete moisture meter or dampness tester that measures the moisture content of concrete and other construction and building materials.
Featuring a variety of preset characteristic curves based on different material densities, this electronic moisture analyzer enables fast, reliable, noninvasive moisture measurement without damaging the surface.
For concrete, cement, cork, wood, plaster, rubber and more.

PCE Instruments PMI 3 - Moisture Meter for Concrete/Wood

PCE Instruments - Moisture Meter for Concrete/Wood Model # PMI 3

The moisture meter is a small and reliable measuring instrument for the determination of existing moisture in, for example, concrete and wood. Corresponding scales for measuring moisture are already stored in the library of the moisture meter.
For each scale in the moisture meter, a separate alarm limit can be stored. As soon as the set alarm limit is exceeded, the moisture meter will sound an audible alarm.
Another special feature of the moisture meter is the possibility of displaying the calcium carbide method (CM%) for screed. Also in this measurement, the moisture meter is placed on the surface to be tested.

PCE Instruments MWM 200 - Moisture Meter for Sand/Oil Content

PCE Instruments - Moisture Meter for Sand/Oil Content Model # MWM 200

The moisture meter is a sensor for measuring moisture of sand consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321.
Our microwave – moisture meter is ideal for installation in tanks with liquid materials such as fuel oil, sludge from cement production, fuels (CWF). Bolt diameter – 12 mm, distance between the central and the surrounding probes – 25 mm. This large distance between the probes ensures high resistance to clogging.
The top of the sensor serves as a coupling with a female thread, which enables the mounting of the sensor on a pipe with a 33 mm diameter. The cable that connects the sensor and the electronic unit is installed in the airtight tube.

PCE Instruments MWM 210 - Moisture Meter for Industrial Production

PCE Instruments - Moisture Meter for Industrial Production Model # MWM 210

For industrial continuous production of wood pellets, chips, sawdust and similar materials, in-line moisture measurement for monitoring and controlling the mixing process is important.
PCE Instruments planar sensors are at a suitable point in the ground or screwed in the wall of the mixer (e.g.pan mixer, screw mixer). It can also be used when other variants or types are used, e.g. for in-line moisture measurement of additives (hopper for sand).
In combination with a control system (SCADA or DCS) or a real-time moisture measurement sensor control & control unit of PCE Instruments, this is a true control of a sensor for measuring humidity.

PCE Instruments MWM 220 - Band Moisture Measurement Sensor Liquid Materials (Pipe Installation)

PCE Instruments - Band Moisture Measurement Sensor Liquid Materials (Pipe Installation) Model # MWM 220

The frequent and important peculiarity which should be considered in any kind of industry and production is that the material used in the production process has got a certain amount of moisture in it.
It goes not only about bulk materials (such as sand, rubble, ore, gravel etc), but about liquids as well (oil, fuel oil, coal-water slurry fuel (CWSF), petroleum etc). Though all the versions of the moisture meter have got similar structure each versions performs its own function. The device consists of an electronic unit and a sensor.
All the parameters can be adjusted depending on the needs of the customer. Due to the material the moisture meter is made of the device is resistant to corrosion, abrasive materials, mechanical stress. It also allow suing the sensor for measurements at very high temperatures (145° C).
Moisture meters for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed.

PCE Instruments MWM 230 - Band Moisture Measurement Sensor for Crushed Stone, Gravel, Ore (Conveyor)

PCE Instruments - Band Moisture Measurement Sensor for Crushed Stone, Gravel, Ore (Conveyor) Model # MWM 230

There is no need in calibration in advance, as the principle of the device is based on the direct method of permittivity measurement. The measurements can be carried out not only for homogeneous materials but also for materials with fractions (crushed stone, gravel, ore etc). The device is non-nuclear, which is a big advantage.
For the enterprises dealing with the carbonated concrete rubble the device is irreplaceable. The level of moisture can reach the mark of 8%, almost equal to sand. The general description of the moisture meter structure is the following: an electronic unit and a probe-sensor made of stainless steel.
The device is resistant to corrosion (stainless steel and dielectric materials) and can operate in the conditions deviating from the norm, for example, at temperatures of 145°C. The moisture meter probe can be mounted on the walls in the hoppers, in pipelines or on trays in conveyors.

PCE Instruments MWM 300P - Microwave/Continuous Moisture Meter for Pellets/Wood Chips

PCE Instruments - Microwave/Continuous Moisture Meter for Pellets/Wood Chips Model # MWM 300P

In the industrial production of wood pulp boards (PB, MDF, OSB) or pellets, the on-line measurement of the moisture/density of the wood material is essential to ensure that the processes in production run as efficiently as possible, energy consumption is kept low, and the raw material losses are minimized.
The use of a microwave moisture meter, as opposed to a humidity sensor, provides a very consistent and high product quality while reducing operating and maintenance costs.
In the online moisture measurement in production processes, the microwave sensor is valuable in many process stages: in the refining of wood pulp, during resin treatment, during pressing/de-watering and during the final drying.
Areas of application for the PCE-MWM 300P microwave sensor include fiberboard (PB, MDF, OSB), sawdust, wood shavings, wood lamellae, wood panels, wood pellets and wood chips (incineration).

PCE Instruments GMM 10 - Grain Moisture Meter for 17 Crops

PCE Instruments - Grain Moisture Meter for 17 Crops Model # GMM 10

The grain moisture meter PCE-GMM 10 is a compact moisture analyzer for up to 17 different cereals.
This grain moisture meter is an important tool in mills, granaries or in processing industries of cereals and legumes.
The cereal moisture meter helps to protect against storage, processing, or buying and selling the bulk material before spoiling.
The garden moisture meter requires only a very small sample volume to measure the moisture content.

PCE Instruments Moisture Meters

Categories

Subscription Form

PCE Instruments Moisture Meters

Categories

1.Provide us your contact details one of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

SUBSCRIBE TO OUR NEWSLETTERS!

Subscription Form