PCE Instruments WSAC 50W 24 Anemometer

Model # WSAC 50W 24

PCE-WSAC 50W 24 Anemometer<br />Radio Wind Warning System / Wind Monitoring on Construction Cranes / 4 to 20-mA analog output / Power supply 110 to 230V AC or +24V DC
It is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine.
Equipped with alarm relay for a pre-alarm or main alarm. Due to the high measuring range of up to 50 m/s of the anemometer, stormy gusts can also be monitored.

PCE-WSAC 50W 24 Anemometer<br />Radio Wind Warning System / Wind Monitoring on Construction Cranes / 4 to 20-mA analog output / Power supply 110 to 230V AC or +24V DC
It is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine.
Equipped with alarm relay for a pre-alarm or main alarm. Due to the high measuring range of up to 50 m/s of the anemometer, stormy gusts can also be monitored.
The radio range of the anemometer is in the open field up to 750 m/2500 ft in the free frequency band of 2.4 GHz. When installing the display of the wind alarm PCE-WSAC 50W in buildings, a range of up to 60 m/200 ft can be achieved for the wind sensor.
Due to the integrated 4 to 20-mA analogue output of the wind alarm display, the measured data can also be transferred to other controllers for evaluation.
Robust plastic housing
Units: km/h, mph, m/s
4 to 20-mA analog output
128 x 64 pixel LC display
Alarm relay
Measuring range up to 180 km/h
Durable stainless steel ball bearings
Ambient temperature -20 to 70°C / -4 to 158°F
Radio transmission

Indication (Digital/Analogue)	Digital
Measurement air speed (Y/N)	Y
Measurement volume flow (Y/N)	N
Measured value memory (Y/N)	N
Interface (Y/N)	Y
Measurement of Temperature (Y/N)	N