• Store Locator
  • Schedule a
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

  • Create a Requisition

    FLUKE 368FC Leakage Current Clamp Meter 40MM Jaw – 60A / FC

    # 368FC

    • True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
    • 40 mm jaw opening
    • Highest resolution of 1 μA, measure up to 60 A
    • FLUKE
    • 368FC


    - +
    Where to buy this product?

    The Fluke 368 FC true-rms leakage current clamp meter helps users detect, document, record and compare leakage current readings over time as a means of preventing unplanned downtime, and identifying intermittent GFCI and RCD trips, all without taking equipment off line.


    The Fluke 368 FC has a large 40 mm diameter jaw for work with large conductors. The clamp’s jaw is fully shielded to accurately capture very small leakage signals, and to minimize external electromagnetic interference.


    The 368 FC also offers wireless data connectivity via Fluke Connect. As part of Fluke Connect — the industry’s largest system of software and more than 40 wireless test tools — the 368 FC allows you to track changes in leakage current over time, helping to identify potential problems before they turn into major failures.


    • True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
    • 40 mm jaw opening
    • Highest resolution of 1 μA, measure up to 60 A
    • Selectable filter function removes unwanted noise
    • Max/Min/Average readings and hold function
    • Forward-facing LED worklight for use in dark wiring cabinets
    • Backlit display; auto backlight off and auto power off for extended battery life
    • CAT III 600V safety rating
    • Internal Memory Logging: up to 65,000 measurement points
    Electrical Specifications
    Measurement function Alternating current
    AC ampere range 3 mA, 30 mA, 300 mA, 3 A, 30 A, 60 A
    mA / A: manual selection
    3 mA / 30 mA / 300 mA: automatic selection
    3 A / 30 A / 60 A: automatic selection
    Range / Resolution 3 mA¹ / 0.001 mA
    30 mA / 0.01 mA
    300 mA / 0.1 mA
    3 A / 0.001 A
    30 A / 0.01 A
    60 A / 0.1 A
    Accuracy – filter activated (40 to 70 Hz), filter off (40 to 1 kHz)² 3 mA – 30 A 1% + 5 digits
    60 A 2% + 5 digits
    Frequency 40 Hz to 1 kHz
    Crest Factor 3
    After calibration accuracy is valid for one year. Accuracy is expressed as ± (% of reading + digits). Reference conditions 23 ±5 °C and a maximum relative humidity of 80%.
    ¹The minimum value is 10 μA rms.
    ²Outside of the TC / °C 18 °C to 28 °C, 0.02 + 1
    Display (LCD) Digital readout: 3300 count
    Display refresh rate 4 times / sec
    Maximum conductor diameter 40 mm
    Dimensions 234 x 101 x 46 mm
    Weight 500 g
    Battery 2 AA, IEC LR6, NEDA 15A, alkaline
    Battery life Expected battery life, without using backlight and spotlight, is more than 150 hours
    Automatic shut-down Meter automatically shuts down after 15 minutes of inactivity
    Safety and Environmental Specifications
    General safety IEC 61010-1: Pollution Degree 2
    Measurement safety IEC 61010-2-032: CAT III 600 V / CAT IV 300 V
    Operating temperature -10 °C to +50 °C
    Storage temperature -40 °C to +60 °C
    Operating humidity Non-condensing (<10 °C)
    90% relative humidity (10 °C to 30 °C)
    75% relative humidity (30 °C to 40 °C)
    45% relative humidity (40 °C to 50 °C)
    Protection class IEC 60529: IP30 (jaw closed)
    Operating altitude 2000 m
    Storage altitude 12000 m
    Current sensor action category IEC 61557-13: Class 2, ≤30 A / m
    Electromagnetic compatibility (EMC)
    IEC 61326-1 Industrial Electromagnetic Environment
    CISPR 11 Group 1 Class B
    Group 1 Generated inside the equipment and / or use radio frequency energy associated with conducting the energy for the device’s own internal functions is essential.
    Class B Equipment for home appliances and residential buildings directly connected to a low voltage power supply network equipment. When this device is connected to a test object, it may exceed the emission levels produced by CISPR 11 requirements.
    Korea (KCC): A type of equipment (radio and communication equipment industry)
    Class A This product meets the requirements of industrial electromagnetic equipment, vendors or users should be aware of this. This device is intended for use in a commercial environment, instead of the home environment.
    USA (FCC): 47 CFR 15 B Subpart. In accordance with section 15.103 provides that the products are considered tax-free device.
    • Leakage Clamp Meter
    • Soft case
    • Safety manual
    • Batteries: 2 AA

    Provide us your contact detailsone of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #

    *Demonstrations can only be scheduled within the UAE