• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • expression
    Create a Requisition

    FLUKE 1663 UK Multifunction Installation Tester

    # 1663 UK

    • Full featured tester for installation professionals
    • Tests to all local regulations and provides test results for complete documentation
    • Tests continuity at L-N, N-PE inputs
    • Tests smooth dc sensitive RCDs (Type B)
    • Tests earth resistance, voltage, and frequency
    • Offers multiple test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V
    FLUKE
    • FLUKE
    • 1663 UK
    • Installation Testers

    Quantity:

    - +
      ADD TO MY TOOLBOX
    Where to buy this product?
    • Checks wiring polarity to detect broken N wires
    • Measures insulation resistance and loop and line resistance
    • Includes Z-max memory for loop tests to support easy evaluation of the highest loop test value
    • Provides unique zero adapter for fast, reliable and accurate test lead and mains cord compensation
    • Measures motor windings with continuity test
    • Calculates prospective earth fault current (PEFC/IK) and prospective short-circuit current (PSC/IK)
    • Measures RCD switching time and tripping level (ramp test)
    • Measures trip time and current for RCD type A & AC in one test
    • Measures RCD variable current
    • Provides automatic RCD test sequence
    • Includes a phase sequence indicator
    • Safety rated CAT III 500V, CAT IV 300V
    • Comes with hard carrying case, padded carrying and waist strap, and remote control probe and lead
    AC voltage measurement
    Range 500 V
    Resolution 0.1 V
    Accuracy 45 Hz – 66 Hz 0.8% + 3
    Input impedance 360 kΩ
    Overload protection 660 V rms
    Continuity testing (RLO)
    Range (autoranging) 20 Ω / 200 Ω / 2000 Ω
    Resolution 0.01 Ω / 0.1 Ω / 1 Ω
    Open Circuit Voltage >4 V
    Insulation resistance measurement (RISO)
    Test voltages 50-100-250-500-1000 V
    Accuracy of tTest voltage (at rated test current) +10%, -0%
    Test voltage 50 V
    100 V
    250 V
    500 V
    1000 V
    Insulation resistance range 20 MΩ /50 MΩ
    20 MΩ / 100 MΩ
    20 MΩ / 200 MΩ
    20 MΩ / 200 MΩ / 500 MΩ
    20 MΩ / 200 MΩ / 1000 MΩ
    Resolution 0.01 MΩ / 0.1 MΩ
    0.01 MΩ / 0.1 MΩ
    0.01 MΩ / 0.1 MΩ
    0.01 MΩ / 0.1 MΩ / 1 MΩ
    0.01 MΩ / 0.1 MΩ / 1 MΩ
    Test current 1 mA @ 50 kΩ
    1 mA @ 100 kΩ
    1 mA @ 250 kΩ
    1 mA @ 500 kΩ
    1 mA @ 1 MΩ
    Loop and line impedance (ZI)
    Range 10 Ω / 0.001 Ω / High current mΩ mode
    Resolution 0.01 Ω / 0.1 Ω / 1 Ω
    Prospective earth fault current, PSC test
    Range 1000 A / 10 kA (50 kA)
    Resolution 1 A / 0.1 kA
    Computation Prospective earth fault current (PEFC) or Prospective short circuit current (PSC) determined by dividing measured mains voltage by measured loop (L-PE) resistance or line (L-N) resistance, respectively.
    RCD testing, RCD types tested
    RCD Type AC¹
    G²,S³
    Model 1663 A4, AC¹, G²,S³
    Notes ¹Responds to AC
    ²General, no delay
    ³Time delay
    4Responds to pulsed signal
    5Responds to smooth DC signal
    Tripping speed test (ΔT)
    Current settings¹ 10-30-100-300-500-1000 mA – VAR
    10-30-100 mA
    Multiplier x ½, x 1
    x 5
    Measurement range RCD Type G 310 ms
    50 ms
    RCD Type S 510 ms
    160 ms
    Notes ¹1000 mA type AC only
    700 mA maximum type A in VAR mode
    VAR mode not available for type B.
    RCD/FI-Tripping Current Measurement/Ramp Test (IΔN)
    Current range 30% to 110% of RCD rated current¹
    Step size 10% of IΔN²
    Dwell time Type G 300 ms/step
    Type S 500 ms/step
    Measurement accuracy ±5%
    Specified trip current ranges (EN 61008-1) 50% to 100% for Type AC
    35% to 140% for Type A (>10 mA)
    35% to 200% for Type A (≤10 mA)
    50% to 200% for Type B
    ²5% for Type B
    Notes ¹30% to 150% for Type A IΔN > 10 mA
    30% to 210% for Type A IΔN = 10 mA
    20% to 210% for Type B
    Earth Resistance Test (RE)
    Range 200 Ω / 2000 Ω
    Resolution 0.1 Ω / 1Ω
    Frequency 128 Hz
    Output Voltage 25 V
    Phase Sequence Indication
    Icon icon phase sequence indicator  Phase Sequence indicator is active.
    General Specifications
    Size (L x W x H) 10 x 25 x 12.5 cm
    Weight (incl. batteries) 1.3 Kg
    Battery size, quantity Type AA, 6 ea.
    Sealing IP-40
    Safety Complies with EN61010-1 Ed 2.0 (2001-02), UL61010, ANSI/ISA –s82.02.01 2000 and CAN/CSA c22.2 No. 1010 2nd edition
    Overvoltage CAT III / 500V; CAT IV 300V
    Performance EN61557-1 to EN61557-7 Second Edition and EN61557-10 Second Edition

    Provide us your contact detailsone of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







    *Demonstrations can only be scheduled within the UAE