MEGGER LTW315 2 Wire loop impedance testers 110 V to 280 V applications

Model # LTW315

Two wire loop impedance measurement.
Guaranteed not to trip working RCDs of up to 30mA.
Three phase circuits with RCD protection can also be tested.
Test runs for approx. 10 secs.
Sophisticated noise detection circuitry that monitors supply to ensure accuracy.
Additional 10 secs is required if electrical noise is detected that could affect results.
High current test used for supplies with no RCD.
Auto-start function will start loop test running as soon as leads are connected.
Operates on a wide range of voltages: 110V to 280V.
Enables testing on 110V centre tapped supplies.
Frequency measurement.
PFC calculation up to 20KA.
Test results are displayed to a resolution of 0.01Ω.
Backlit display.
Three-phase safe and Category IV 300V rated.

Loop Impedance Test Type	2 Wire, 3 Wire
Maximum Voltage Measurement	440V
Best Loop Test Accuracy	±10%
Non-Trip Loop Test	Yes
Safety Category	CAT IV 300 V, IEC 61010
Display Type	LCD
Battery Type	AA
Battery Life	2000 Tests
Power Source	Battery
Dimensions	203 x 148 x 78mm
Weight	1kg
Height	78mm
Length	203mm
Width	148mm
Minimum Operating Temperature	-10°C
Safety Category Level	CAT IV
Maximum Operating Temperature	+50°C
Model Number p	LTW315
Safety Category Voltage	300V