FLUKE i2000 flex AC Flexible Current Clamp (2000 A)

Model # i2000 flex

Three ranges: 20 A, 200 A & 2000 A, 100 mV/A, 10 mV/A & 1 mV/A output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor diameter 7″ (178 mm)

Three ranges: 20 A, 200 A & 2000 A, 100 mV/A, 10 mV/A & 1 mV/A output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor diameter 7″ (178 mm)
CAT III 600 V safety rating

Current Ranges	20 A, 200 A, 2000 A ACRMS
Output Sensitivity (AC-Coupled)	100 mV, 10 mV, 1 mV per A
Load Impedance	100 kΩ minimum
Accuracy (at 25°C)	±1% of range (45 to 65 Hz)
Linearity (10 to 100% of range)	±0.2% of reading
Noise	8 mV ac rms (30 A), 2 mV ac rms (300 A, 3000 A)
Frequency Range	10 Hz to 20 kHz (-3 dB)
Phase Error	< ±1° (45 to 65 Hz), : ±10° (at 20 kHz)
Position Sensitivity (with cable >25 mm from the coupling)	±2% of range
External Field (with cable >200 mm from the head)	±1% of range
Power Supply	2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator
Temperature Coefficient	±0.08% of reading per °C
Working Voltage	600 V ac rms or dc
Head Cable	Length (double insulated): 24″ (610 mm) Diameter: 0.56″ (14.3 mm)
Head Bend Radius	1.5″ (38.1 mm)
Cable Length (head to electronics)	6.56′ (2 m)
Output Connection	BNC with BNC to Banana adapter included
Operating Temperature Range	32 to 158°F (0 to 70°C) (head and electronics)
Storage Temperature Range	-40 to 221°F (-40 to 105°C) (head) -4 to 185°F (-20 to 85°C) (electronics)
Operating Humidity	15 to 85% (non-condensing)
Weight	6.34 oz (180 g) (head), 6.70 oz (190 g) (electronics)
Safety Standards	EN 61010-1: 2001 EN 61010-2-032: 2002 EN 61010-031: 2002 600 Vrms, Category III, Pollution Degree 2
EMC Standards	EN 61326: 1998 +A1, A2, & A3