FLUKE 718 100G Pressure Calbrator (7 bar)

Model # 718 100G

Pressure Source and Milli amp Measurement to calibrate and maintain almost any pressure device
Integrated pump is easily cleaned when accidentally exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field
Error % calculation for quicker pass/fail decision making in the field

Pressure Source and Milli amp Measurement to calibrate and maintain almost any pressure device
Integrated pump is easily cleaned when accidentally exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field
Error % calculation for quicker pass/fail decision making in the field
Best in class mA accuracy of 0.015 % for better measurement confidence and workload coverage
Min/Max/Hold to capture changing measurements
Switch test feature for quicker and more accurate pressure switch testing
Built-in pressure / vacuum hand pump; with vernier and bleed valve
New switch test function captures set; reset and dead band.
Pressure measurement to 0.05% of full span; using an internal pressure sensor
Pressure measurement to 10;000 PSI; 700 bar using any of the Fluke-700Pxx Pressure Modules
Current measurement with 0.025% accuracy and 0.001 mA resolution
Wide range of selectable measurement units for pressure
24 volt loop power supply
Min-Max Hold and damp functions
1/8 inch NPT female pressure fitting
Simple; push-button user interface

Pressure Range	-12 to 100 PSI, (-850 mbar to 7 bar, -83 to 689.48 kPa)
Pressure Resolution	0.01 psi, 0.1 mbar, 0.01 kPa
Over Pressure	2 X full scale
Loop Power Range	24 V dc
Loop Power Accuracy	+/- 10%
Display	Clear 5 digit LCD
Operating Temperature	-10 to 55 °C
Operating Altitude	3,000 M max
Size	201 mm L x 98 mm W x 52 mm (7.93in. L x 3.86in. W X 2.06in.)
Weight	22 oz, approximately 600G with holster
Battery type	Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline