FLUKE 717 5000G Pressure Calibrator (345 bar)

Model # 717 5000G

Measure pressure; 0.05% of full scale with internal sensor up to 5000 PSI/345 bar sensor (5000G model)
Measure mA with 0.015% accuracy and 0.001 mA resolution; while sourcing 24V loop power
Measure pressure to 10;000 psi/700 bar using one of 29 Fluke 700Pxx Pressure Modules

Measure pressure; 0.05% of full scale with internal sensor up to 5000 PSI/345 bar sensor (5000G model)
Measure mA with 0.015% accuracy and 0.001 mA resolution; while sourcing 24V loop power
Measure pressure to 10;000 psi/700 bar using one of 29 Fluke 700Pxx Pressure Modules
1/8 NPT female pressure fitting
Compatible with non-corrosive Gases and liquids
Select eleven different engineering units
Zero; min; max; and hold functions
Calibrate P/I instruments with simultaneous pressure and current measurement
Pressure switch test function captures set; reset and Deadband values of a pressure switch
Error% calculation of mA measurements for quick pass-fail decisions
Long lasting battery life
Holster features test lead storage
Compatible with Toolpack magnetic hanging system
New switch test

Measurement Accuracy

Pressure

717 Series
Measure Pressure	(internal sensor)
Accuracy	0.05% full scale
Functions	Zero, Min, Max, Hold, Damp
	Note Gasses / liquids (non-corrosive)

Fluke 717 5000G
Range	0 to 5000 PSI, (0 bar to 345 bar, 0 to 34474 kPa)
Resolution	0.1 PSI, 0.01 bar, 1 kPa
Over Pressure	2 X full scale

Fluke 717 Series with Pressure Modules
Measure Pressure	(via pressure module connector using optional Pressure Modules)
Range	29 pressure modules, 0-1 inH20 to 10,000 PSI, 2.5 mbar to 700 bar ranges. Over pressure per pressure module specs
Resolution	Per pressure module specs
Accuracy	per pressure module specs
Functions	Zero, Min, Max, Hold, Damp