FLUKE 717 1500G Pressure Calibrator (103.4 bar)

Model # 717 1500G

Range: 0 to 1500 psi (0 bar to 103.4 bar, 0 to 10342 kPa)
Resolution: 0.1 psi, 0.01 mbar, 1 kPa
Over pressure: 2 x full scale
Measure pressure: Internal sensor
Accuracy: 0.05% full scale
Functions: Zero, min, max, hold, damp
Measure mA with 0.015% accuracy and 0.001 mA resolution, while sourcing 24V loop power
1/8 NPT female pressure fitting
Compatible with non-corrosive Gases and liquids
Select eleven different engineering units
Calibrate P/I instruments with simultaneous pressure and current measurement
Pressure switch test function captures set, reset and Deadband values of a pressure switch
Error % calculation of mA measurements for quick pass/fail decisions
Long-lasting battery life
Holster features test lead storage
Compatible with Toolpack magnetic hanging system
New switch test

Current	Range	0 to 24 mA (-25% to 125%)
	Resolution	0.001 mA
	Accuracy	0.015% + 2 counts
Specifications
Loop power	Range	24 V DC
	Accuracy	±10%
		Drive; 20 mA into 1000 ohms for battery > 6.8 V; 700 W for battery 5.8 to 6.8 V
Display	Clear 5 digit LCD
Environmental Specifications
Operating temperature	-10°C to 55°C
Storage temperature	-40°C to 60°C
Humidity (without condensation)	95% (10°C to 30°C)
	75% (30°C to 40°C)
	45% (40°C to 50°C)
	35% (50°C to 55°C)
Operating altitude	3,000 M max
Safety Specifications
Safety	CSA C22.2 No. 1010.11992
Mechanical and General Specifications
Size (L x W x H)	201 x 98 x 52 mm (7.93 x 3.86 x 2.06 in)
Weight	22 oz, approximately 600 G with holster
Warranty	3 years
Shock and vibration	Random, 2 G, 5-500 Hz
	1 m drop test
Battery type	Single 9 V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline