• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • Create a Requisition

    FLUKE 28 II Ex Intrinsically Safe True RMS Industrial Multimeter

    # 28 II Ex

    • Suitable for use in ATEX zones 1; 2; 21 or 22 (intrinsically safe)
    • Work safely to measure voltage; current; resistance; conductance; diode; frequency and more
    • True RMS; low pass filter; MIN/MAX/AVG/Peak functions; relative mode; auto/manual ranging and input alert
    FLUKE
    • FLUKE
    • 28 II Ex

    Quantity:

    - +
      ADD TO MY TOOLBOX
    Where to buy this product?
    Product overview: Fluke 28 II Ex Intrinsically Safe True RMS Digital Multimeter

    Now there’s one intrinsically safe digital multimeter (DMM) you can use in IIC (gas), in Zone 1 and 2 and IIIC (dust), Zone 21 and 22. Whether you work in petroleum, chemical, or pharmaceutical environments, all the test and troubleshooting power you need is packed into the most rugged intrinsically safe (IS) DMM Fluke has ever built. The Fluke 28 II Ex is also waterproof, dust-proof and drop-proof. You’ll be equipped to handle any situation, inside and outside of hazardous zones, without compromising compliance or measurement performance.

     

    All the measurement functions of our most popular industrial DMMs

    One tool equips you with all the testing and troubleshooting power you need wherever you go––inside or outside ATEX zones 1,2,21, or 22. No need to carry different meters for different areas, or worry about crossing through an Ex-required zone with a non-Ex rated instrument.

     

    • 4-1/2 digit mode for precise measurements (20,000 counts)
    • True-rms ac voltage and current for accurate measurement on nonlinear signals
    • Measures up to 1000 V and 10A AC and DC (note that Ex zones require reduced measurements)
    • Low pass filter ensures accurate voltage and frequency measurements on variable speed motor drives (VSDs)
    • Frequency to 200 kHz and % duty cycle to help you diagnose VSDs and switching power supplies
    • Resistance, continuity and diode test
    • 10,000 μF capacitance range for components and motor caps
    • Conductance measurements for high resistance or leakage tests
    • Min/Max-Average and Peak capture to record transients and variations automatically
    • Relative mode to remove test lead interference on resistance measurements
    • Auto and manual ranging for maximum flexibility
    • Input Alert protects you by chirping and flashing “Lead when leads are plugged into the wrong inputs

     

    Easy to use

    Important extras keep you productive all day long in less than optimal conditions.

    • Backlit keypad buttons provide extra visibility in poorly lit areas, even when you’re wearing full PPE
    • Large display digits and 2-level bright white backlight also increases visibility
    • Long battery life – 400 hours typical without backlight (Alkaline)
    • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks

     

    Easy to service in the field

    Access to the separate battery compartment makes it easy to change batteries or fuses without jeopardizing instrument calibration.

     

    Key features
    • A completely sealed, IP67 rated case
    • Withstands drops up to 10 ft or 3 m (with holster)
    • Dustproof per IEC60529 IP6x
    • Waterproof per IEC60529 IPx7
    • Meets IEC Overvoltage Electrical Safety Standard No. 61010-1:2001
      • Measurement Category III, 1000V, Pollution Degree 2
      • Measurement Category IV, 600V, Pollution Degree 2
    • Reversible holster for added protection of the display when not in use
    Accuracy Specifications
    Accuracy specifications are shown as ±(% of reading + number of digits)
    DC voltage Range 0.1 mV to 1000 V
    Accuracy ±0.05% + 1
    AC voltage Range 0.1 mV to 1000 V
    Accuracy ±0.7% +4
    DC current Range 0.1 μA to 10 A
    Accuracy ±0.2% + 4
    AC current Range 0.1 μA to 10 A
    Accuracy ±1.0% + 2
    Resistance Range 0.1 Ω to 50 MΩ
    Accuracy ±(0.2% + 1)
    Conductance Range 60.00 nS
    Accuracy ±(1.0% + 10)
    Diode test Range 2.0 V
    Accuracy ±(2.0% + 1)
    Duty cycle Range 0.0% to 99.9%
    Accuracy Within ±(0.2% per kHz + 0.1%) for rise times <1 µs
    Capacitance Range 10 nF to 9999 μF
    Accuracy ±(1.0% + 2)
    Frequency Range 0.5 Hz to 199.99 kHz
    Accuracy ±(0.005% + 1)
    Temperature Range -200°C to +1090°C (-328°F to +1994°F)
    Accuracy ±(1.0% + 10)°C [±(1.0% + 10)°F]
    Display counts 6000 counts/19,999 counts in high-resolution mode
    Peak capture Record transients up to 250 us
    Min/Max/Avg recording Display signals up to approximately 100 ms
    Accuracy specifications are shown as ±(% of reading + number of digits)
    Safety Certifications
    ATEX II 2 G Ex ia IIC T4 Gb
    II 2 D Ex ia IIIC T130°C Db
    I M1 Ex ia I Ma
    NEC-500 Class I, Div 1, Groups A-D, 130°C
    IEXEx Ex ia IIC T4 Gb
    Ex ia IIIC T130°C Db
    Ex ia I Ma
    GOST R Ex Overvoltage protection: Measurement Category III, 1000 V, Pollution Degree 2
    Measurement Category IV, 600 V, Pollution Degree 2
    IP rating IP67
    General Specifications
    Power
    Three AAA batteries
    Battery life: 400 hours
    Display LCD, with backlight
    External protection Rubber holster
    Manufacturer Warranty Three years
    Size with holster (H x W x L) 6.35 x 10.0 x 19.81 cm (2.5 x 3.93 x 7.8 in)
    Weight with holster 698.5 g (1.54 lb)
    • Ex-holster
    • Alligator clips
    • Test leads
    • Batteries
    • Manual
    • CD-ROM

    Explore More in Intrinsically Safe Tools

    Provide us your contact detailsone of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







    *Demonstrations can only be scheduled within the UAE