• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • Create a Requisition

    FLUKE NETWORKS DSX2-8000QOI INT Versiv 2 CableAnalyzer w/Quad OLTS, OTDR and Fiber Inspection, Integrated Wi-Fi

    # DSX2-8000QOI INT

    • Versiv enables users to accomplish more than ever before with a cable tester, by accelerating every step of the testing process
    • LinkWare Live cloud service lets the Project Manager remotely set up the testers, monitor job progress and even location from any smart device
    • ProjX™ management system eases tasks from initial set-up of a job to system acceptance.
    FLUKE NETWORKS
    • FLUKE NETWORKS
    • DSX2-8000QOI INT

    Quantity:

    - +
      ADD TO MY TOOLBOX
    Where to buy this product?
    • Versiv enables users to accomplish more than ever before with a cable tester, by accelerating every step of the testing process
    • LinkWare Live cloud service lets the Project Manager remotely set up the testers, monitor job progress and even location from any smart device
    • ProjX™ management system eases tasks from initial set-up of a job to system acceptance. It eliminates redundant steps, and ensures that all tests are completed correctly the first time, and every time
    • Taptive™ user interface puts advanced data analysis and easy set-up and operation at the fingertips of technicians of all skill levels
    • LinkWare PC management software provides unmatched analysis of test results and professional test reports
    • The DSX reduces the time required to fix cabling faults with dedicated diagnostics, a simple test that locates the problem
    Copper Certifications
    Category 6A / Class EA Test Time 8 Seconds
    Category 8 / Class I/II Test Time 15 Seconds
    HDTDX/HDTDR Diagnostic Test Times ~3 Seconds
    Internal Memory ~5,000 Cat 8 with plots
    ~12,000 Cat 6A with plots
    Level V Accuracy 1 GHz
    2G Accuracy 2 GHz
    Resistance Unbalance Measurement Yes
    Shield Integrity Check Yes
    TCL Measurement Yes
    ELTCTL Measurement Yes
    CDNEXT Measurement Yes
    CMRL Measurement Yes
    Built in Alien XTalk Module Yes
    Channel Adapter 2 GHz Range
    Permanent Link Adapter 2 GHz Range
    Environmental
    Operating Temperature 32°F to 113°F (0°C to 45°C)
    Storage Temperature -22°F to 140°F (-30°C to 60°C)
    Operating Relative Humidity (% RH Without Condensation) 0% to 90%, 32°F to 95°F (0°C to 35°C)
    0% to 70%, 95°F to 113°F (35°C to 45°C)
    Vibration Random, 2 g, 5 Hz-500 Hz
    Shock 1 m drop test with and without module and adapter
    Safety CSA 22.2 No. 61010, IEC 61010-1 3rd Edition
    Operating Altitude 13,123 ft (4,000 m)
    10,500 ft (3,200 m) with AC Adapter
    EMC EN 61326-1
    General Specifications
    Autotest Time Full 2-way Autotest of Cat 5e or 6/Class D or E: 7 seconds Full 2-way Autotest of Cat 6A/Class EA: 8 seconds Full 2-way Autotest of Cat 8: 16 seconds
    Support Test Parameters Wire Map, Length, Propagation Delay, Delay Skew, DC Loop Resistance, Insertion Loss (Attenuation), Return Loss (RL), NEXT, Attenuation-to-crosstalk Ratio (ACR-N), ACR-F (ELFEXT), Power Sum ACR-F (ELFEXT), Power Sum NEXT, Power Sum ACR-N, Power Sum Alien Near End
    Xtalk (PS ANEXT), Power Sum Alien Attenuation Xtalk Ratio Far End (PS AACR-F)
    Input Protection Protected against continuous telco voltages and 100 mA over-current. Occasional ISDN over-voltages will not cause damage
    Display 5.7 in LCD display with a projected capacitance touchscreen
    Case High impact plastic with show absorbing overmold
    Dimensions Main Versiv unit with DSX module and battery installed: 2.625 in x 5.25 in x 11.0 in (6.67 cm x 13.33 cm x 27.94 cm)
    Weight Main Versiv unit with DSX module and battery installed: 3 lbs, 5oz (1.28 kg)
    Main Unit and Remote Lithium ion battery pack, 7.2 V
    Typical Battery Life 8 hours
    Charge time Tester off: 4 hours to charge from 10 % capacity to 90 % capacity
    Languages Supported English, French, German, Italian, Japanese, Portuguese, Spanish, Chinese, Korean, Russian, Traditional Chinese, Czech, Polish, Swedish, Hungarian
    Calibration Service center calibration period is 1 year
    • Versiv Mainframe & Remote
    • 2 x DSX-8000 CableAnalyzer Modules
    • OptiFiber Quad OTDR Module
    • Set of Cat 8/Class I Permanent Link Adapters
    • Set of Cat 8/Class 1 Channel Adapters
    • 2 x Headsets
    • 2 x Hand Straps
    • 2 x Shoulder Straps
    • Hard sided Carry Case
    • USB Interface Cable
    • Versiv Open Source Software CD
    • 2 x AC Chargers
    • 2 x Universal Couplers
    • 2 x AxTalk Terminators
    • 2 x Quick Clean Cleaners (1.25/2.50 mm)
    • SC/SC Simplex adapters
    • 2 x SC/LC Multimode Launch Cables—50 µm
    • 2 x SC/LC Singlemode Launch Cable—9 µm
    • USB Fiber Inspection Video Probe with 4 Tips
    • 2 x LC/LC Simplex Adapter
    • SC/LC EF-Compliant MM TRC Kit 50 µm
    • SC/LC SM TRC Kit
    • TRC Carrying Case
    • Statement of Calibration
    • Getting Started Guides

    Provide us your contact detailsone of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







    *Demonstrations can only be scheduled within the UAE