• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • Oscilloscope Accessories

    Shop our selection of Oscilloscope Accessories from our retail outlets across dubai & UAE - AABTools



    Categories

    FLUKE AS400 - Probe Extension Set; for VPS400 Probes
      FLUKE - Probe Extension Set; for VPS400 Probes Model # AS400

     
    • Probe accessory kit
    • For the VPS400 probes
    FLUKE BP290 - Battery Pack Single Cap 190-S II
      FLUKE - Battery Pack Single Cap 190-S II Model # BP290

     
    • Li-Ion single capacity battery pack
    • For 190-series II ScopeMeter test tool
    • 2400 mAh capacity
    • For the 120B-series scopemeters (123B/NA, 124B/NA and 125B/NA)
    FLUKE BP291 - Battery Pack; Fluke 190 S
      FLUKE - Battery Pack; Fluke 190 S Model # BP291

     
    • The Fluke BP291 Double Capacity 4800mAh Li-Ion Battery Pack is a replacement accessory for the Fluke 190 Series II Scopemeters.
    FLUKE C290 - Hard-Shell Carrying Case
      FLUKE - Hard-Shell Carrying Case Model # C290

     
    • Hard shell carrying case
    • For use with Fluke ScopeMeter 190 Series II
    FLUKE CS20MA - Current Shunt 4-20 mA
      FLUKE - Current Shunt 4-20 mA Model # CS20MA

     
    • Current shunt for use with Fluke ScopeMeter test tools
    • 4 to 20mA current range for AC and DC measurements on process control loops
    • 30V maximum safe voltage
    • 10mV/mA output level
    • Shrouded banana plug connections
    FLUKE HC120-II - Set of 2 hook clips
      FLUKE - Set of 2 hook clips Model # HC120-II

     
    • Shielded test Leads for oscilloscope, resistance and Continuity measurements
    • Resistance, Continuity, Diode and Capacitance meter measurements
    • Voltage, current and power harmonics
    FLUKE HC200 - Hook Clips
      FLUKE - Hook Clips Model # HC200

     
    • Set of four Hook Clips (two red and two gray)
    • Designed for use with VPS200, VPS100 and PM8918 series probes
    FLUKE HH290 - Hanging Hook; ScopeMeter S 190 II
      FLUKE - Hanging Hook; ScopeMeter S 190 II Model # HH290

     
    • Hanging hook
    • For 190-Series II ScopeMeter instruments
    • For 43x-series Power Quality Analyzers
    • For MDA-5xx series Motor Analyzers
    FLUKE MA190 - Medical Accessory Kit (190 S)
      FLUKE - Medical Accessory Kit (190 S) Model # MA190

     
    • Kit includes 50 ohm BNC insulated feed through terminator, 50 ohm BNC terminator with 10:1 signal attenuation, 1 ohm current shunt for current measurements
    • Also includes safety-designed BNC cable, 1.5m (5′), insulated BNC (f) to 4mm-banana plug adapter, dual 4mm banana receptacles (1 red, 1 black)
    • Accessory set enables interconnection of the Fluke ScopeMeter 190 series for use in the field of medical imaging and video systems
    FLUKE OC4USB - Serial Interface Adapter/Cable (USB)
      FLUKE - Serial Interface Adapter/Cable (USB) Model # OC4USB

     
    • Supports the Fluke 120 Series and Fluke 190 Series ScopeMeter test tools, as well as the 43, 43B and 430 Series Power Quality analyzers
    • Supports Windows Vista/XP/2000/Me/98 SE
    • Cable length 1.5 m (4.9 ft)
    FLUKE PM8907-801 - Battery Charger/Line Voltage Adapter EUR (120 S)
      FLUKE - Battery Charger/Line Voltage Adapter EUR (120 S) Model # PM8907-801

     
    • Line frequency: 50, 60, and 400 Hz ±10%
    • 15V Output Voltage
    • 300mA Maximum Output Current
    • 5mm Power Jack per DIN 45323
    • 10VA Power Consumption
    • 600Vrms Maximum Voltage to Ground CAT III per IEC 61010-31
    FLUKE PM8907-807 - POWER ADAPTOR/BATTERY CHARGER
      FLUKE - POWER ADAPTOR/BATTERY CHARGER Model # PM8907-807

     
    • Line voltage: 115 volts plus or minus 15 percent or 230 volts plus or minus 15 percent
    • Frequency: 50 to 60 Hz plus or minus 10-percent
    • Output voltage: 15-Volt
    • Output Plug: 5 mm power jack per DIN 45323
    • Power Consumption: 10 VA
    FLUKE PM8907-808 - Battery Charger/Line Voltage Adapter UNIVERSAL (120 S)
      FLUKE - Battery Charger/Line Voltage Adapter UNIVERSAL (120 S) Model # PM8907-808

     
    • Line voltage: 115 volts plus or minus 15 percent or 230 volts plus or minus 15 percent
    • Frequency: 50 to 60 Hz plus or minus 10-percent
    • Output voltage: 15-Volt
    • Output Plug: 5 mm power jack per DIN 45323
    • Power Consumption: 10 VA
    FLUKE PM9080 - Serial Interface Adapter/Cable (RS232)
      FLUKE - Serial Interface Adapter/Cable (RS232) Model # PM9080

     
    • Safety designed serial interface
    • Data exchange with a PC
    • Hard Copy: ScopeMeter test tools support Epson FX/LQ Series, LaserJet and DeskJet compatible printers
    • Remote control: Waveforms, Scope and Meter measurements, Front Set-ups and performance verification/calibration
    • Transfer rate: up to 57k6 Baud
    FLUKE PM9081 - Dual Banana Plug to Female BNC Adapter
      FLUKE - Dual Banana Plug to Female BNC Adapter Model # PM9081

     
    • Dual banana plug 4mm male to female BNC adapter
    • Consists of two adapters
    • Maximum signal voltage: 300V rms
    • Maximum voltage to ground: 600V rms
    • CAT III per IEC 61010-031
    FLUKE PM9082 - Dual Banana Jack to Male BNC Adapter
      FLUKE - Dual Banana Jack to Male BNC Adapter Model # PM9082

     
    • One red (signal) and one black (ground) 4-mm banana contact
    • Consists of two adapters
    • Maximum signal voltage: 600V rms
    • Maximum voltage to ground: 600V rms
    • CAT III per IEC 61010-031
    FLUKE PM9091 - Coaxial BNC Cables (1.5 m)
      FLUKE - Coaxial BNC Cables (1.5 m) Model # PM9091

     
    • The set consists of three black cables with colored BNC male connectors (red, gray and black) for easy identification
    • Maximum signal voltage: 300V rms
    • Maximum voltage to ground: 600V rms
    • BB120 Shielded banana to BNC adapter is required to adapt to ScopeMeter 120 series shielded banana jack inputs
    • 1.5m cable length
    FLUKE PM9092 - Coaxial BNC Cables (0.5 m)
      FLUKE - Coaxial BNC Cables (0.5 m) Model # PM9092

     
    • he set consists of three black cables with colored BNC male connectors (red, gray and black) for easy identification
    • Maximum signal voltage: 300V rms
    • Maximum voltage to ground: 600V rms
    • BB120 Shielded banana to BNC adapter is required to adapt to ScopeMeter 120 series shielded banana jack inputs
    • 0.5m cable length
    FLUKE PM9093 - Male BNC to Female BNC Adapter
      FLUKE - Male BNC to Female BNC Adapter Model # PM9093

     
    • Male BNC to dual female BNC T-piece
    • Maximum signal voltage: 300V rms
    • Maximum voltage to ground: 600V rms
    • BB120 Shielded banana to BNC adapter is required to adapt to ScopeMeter 120 series shielded banana jack inputs
    • CAT III per IEC 61010-031
    FLUKE PM9096-201 - Secondary Pick-up
      FLUKE - Secondary Pick-up Model # PM9096-201

     
    • For use with Fluke ScopeMeters test tools in automotive applications
    • Attenuation: 1000x when used with instruments having an input impedance of 1 megaohms/25 pF
    • Silicon insulated with BNC connector
    • BB120 Shielded banana to BNC adapter is required to adapt to ScopeMeter 120 series shielded banana jack inputs
    • 3m Length
    FLUKE RS120-III - Probe Accessory Replacement Set
      FLUKE - Probe Accessory Replacement Set Model # RS120-III

     
    • Replacement accessory set
    • For STL120-III and VPS40-III shielded test leads
    • Set consists of ground leads (2, black), safety rating 600V CAT III, hook clips (1 red, 1 grey), safety rating 600V CAT III, 2mm add-on test pins (1 red, 1 grey), 1000V CAT II
    FLUKE RS400 - Probe Replacement Set; for VPS400 Probes
      FLUKE - Probe Replacement Set; for VPS400 Probes Model # RS400

     
    • Bright backlit display for easy viewing of pressure measurements
    • Compatible with most Hydraulic and Pneumatic Test Pumps
    • Rugged, durable design with protective holster
    • Three-year warranty promises long term value for the investment
    • Combined with either the 700PTPK pneumatic pump kit or the 700HTPK hydraulic pump kit for a complete measurement and testing solution
    FLUKE RS500 - Probe accessory replacement set for VPS500 probes
      FLUKE - Probe accessory replacement set for VPS500 probes Model # RS500

     
    • Convenient instrument for determining the desired resistance values in circuits under design or test
    • The resistance obtainable is from 0 to 11, 111, 110 in1 increments
    • All resistors are 1% precision
    FLUKE SCC120B - Software soft carry case accessory kit 120B series
      FLUKE - Software soft carry case accessory kit 120B series Model # SCC120B

     
    • Carrying case
    • Allows you to carry all your 120B accessories
    • Includes software for 120B
    FLUKE SCC120E - FlukeView Software + USB Cable + Case (120S) – English
      FLUKE - FlukeView Software + USB Cable + Case (120S) – English Model # SCC120E

     
    • FlukeView software for Windows. English, French and German language
    • OC4USB Optically isolated adapter/cable
    • ScopeMeter 120 series hard carrying case (black)
    • One BB120 adapter
    • Measures 15-1/2″ width by 13-1/2″ height by 4-3/4″ depth
    FLUKE SCC190 - FlukeView Software + Cable + Case (190S)
      FLUKE - FlukeView Software + Cable + Case (190S) Model # SCC190

     
    • C190 Protective Hard Shell Carrying Case
    • OC4USB Optically isolated USB-Cable
    • SW90W FlukeView® Software for Windows. English, French and German language version included
    FLUKE SCC290 - Software and Carrying Case for 190 S II
      FLUKE - Software and Carrying Case for 190 S II Model # SCC290

     
    • Full version of FlukeView software
    • Includes hard protective C290 carrying case for 190 series II ScopeMeters
    FLUKE SP120B - Screen protector for 120B series
      FLUKE - Screen protector for 120B series Model # SP120B

     
    • Protect your screen with a Fluke SP120B Screen Protector for 120B Series ScopeMeter
    FLUKE STL120-III - Shielded Test Lead
      FLUKE - Shielded Test Lead Model # STL120-III

     
    • Bandwidth: 12,5 MHz
    • Maximum signal voltage: 600V rms, CAT III per IEC 61010-031:2008
    • Maximum voltage to ground: 600V rms, CAT III per IEC 61010-031:2008
    • Maximum current: 1A
    • 2mm Add-on test pin: 600V, CAT II per IEC 61010-031:2008
    FLUKE SW90W - FlukeView Software
      FLUKE - FlukeView Software Model # SW90W

     
    • Software for use with Fluke 190 and 120 series ScopeMeter for storing and retrieving waveforms, gathering measurement data, and performing waveform analysis
    • Uses Windows XP/Vista/Windows 7 operating systems
    • Requires one free RS232 port (COM port), or USB port
    • Requires an optional PM9080 RS232 adapter/cable, or an optional OC4USB cable (190C-series, 120-series)
    FLUKE TRM50 - 50 Ohm feed-through terminator BNC
      FLUKE - 50 Ohm feed-through terminator BNC Model # TRM50

     
    • Fluke TRM50 Male Coaxial Feed-Through BNC-to-Female BNC Cable Terminator
    • 50 OHM FEED-THROUGH TERMINATOR BNC
    FLUKE VPS101 - 1:1 Voltage Probe Set; black; 30 MHz; 1.2m
      FLUKE - 1:1 Voltage Probe Set; black; 30 MHz; 1.2m Model # VPS101

     
    • Probe set includes 300V CAT III rated, 1:1 voltage probe, hook clip for probe tip, ground lead with mini alligator, insulation sleeve, 30V CAT II rated ground spring for the probe tip
    • Bandwidth: 30 MHz
    • Input resistance: 1 megaohm
    • Input capacitance: 42 pF plus input capacitance of instrument
    FLUKE VPS210-G - 10:1 Voltage Probe Set; grey; 200 MHz; 1.2m
      FLUKE - 10:1 Voltage Probe Set; grey; 200 MHz; 1.2m Model # VPS210-G

     
    • Probe set includes 600V CAT III / 1000V CAT II rated 10:1 voltage probe, hook clip for probe tip, ground lead with mini alligator, insulation sleeve, 30V CAT II rated ground spring for probe tip
    • Bandwidth: 200 MHz
    • Input resistance: 10 megaohms
    • Input capacitance: 12 pF
    • Cable length: 1.2m
    FLUKE VPS210-R - 10:1 Voltage Probe Set; 1 red; 200 MHz; 1.2m
      FLUKE - 10:1 Voltage Probe Set; 1 red; 200 MHz; 1.2m Model # VPS210-R

     
    • Attenuation: 10x
    • Bandwidth: 200 MHz
    • Max. Input Voltage: 1000 V CAT II or 600 V CAT III
    • Max. Voltage to ground: 1000 V CAT II or 600 V CAT III per IEC / EN61010-031
    • Input Resistance: 10 MΩ
    • Input Capacitance: 12 pF
    • Compensation range: 10 to 22 pF
    • Cable Length: 1.2 m
    FLUKE VPS212-G - 10:1 Voltage Probe Set; grey; 200 MHz; 2.5m
      FLUKE - 10:1 Voltage Probe Set; grey; 200 MHz; 2.5m Model # VPS212-G

     
    • Attenuation: 10x
    • Bandwidth: 200 MHz
    • Max. Input Voltage 1000 V CAT II or 600 V CAT III
    • Max. Voltage to ground: 1000 V CAT II or 600 V CAT III per IEC / EN61010-031
    • Input Resistance: 10 M?
    • Input Capacitance: 18 pF
    • Compensation range: 10 to 30 pF
    • Cable Length: 2.5 m
    FLUKE VPS212-R - 10:1 Voltage Probe Set; red; 200 MHz; 2.5m
      FLUKE - 10:1 Voltage Probe Set; red; 200 MHz; 2.5m Model # VPS212-R

     
    • Attenuation: 10x
    • Bandwidth: 200 MHz
    • Max. Input Voltage 1000 V CAT II or 600 V CAT III
    • Max. Voltage to ground: 1000 V CAT II or 600 V CAT III per IEC / EN61010-031
    • Input Resistance: 10 M?
    • Input Capacitance: 18 pF
    • Compensation range: 10 to 30 pF
    • Cable Length: 2.5 m
    FLUKE VPS220-G - 100:1 Voltage Probe Set; grey; 200 MHz; 1.2m
      FLUKE - 100:1 Voltage Probe Set; grey; 200 MHz; 1.2m Model # VPS220-G

     
    • Double insulated voltage probe for ScopeMeter 190 series.
    • 600 V CAT III / 1000 V CAT II rated 100:1 Voltage Probe
    • Hook Clip for Probe Tip
    • Ground Lead with Mini Alligator
    • Insulation Sleeve
    • 30 V CAT II rated Ground Spring for Probe Tip
    FLUKE VPS220-R - 100:1 Voltage Probe Set; red; 200 MHz; 1.2m
      FLUKE - 100:1 Voltage Probe Set; red; 200 MHz; 1.2m Model # VPS220-R

     
    • Attenuation: 100:1
    • Bandwidth: 200 MHz
    • Max. Input Voltage 1000 V CAT II or 600 V CAT III
    • Max. Voltage to ground: 1000 V CAT II or 600 V CAT III per IEC / EN61010-031
    • Input Resistance: 100 M?
    • Input Capacitance: 4.6 pF
    • Compensation range: 10 to 25 pF
    • Cable Length: 1.2 m
    FLUKE VPS40-III - Voltage Probe
      FLUKE - Voltage Probe Model # VPS40-III

     
    • Voltage probe, 10:1, with safety-designed shrouded 4mm test pin
    • use with 120 Series ScopeMeter
    • Hook clip and ground lead included
    • The shrouded 4mm banana test pin makes this probe also compatible with standard safety-designed alligator clips
    • 600V CAT III / 1000V CAT II rated
    FLUKE VPS41 - Voltage probe set 40 MHZ 600V CAT IV
      FLUKE - Voltage probe set 40 MHZ 600V CAT IV Model # VPS41

     
    • Shielded test Leads for oscilloscope, resistance and Continuity measurements
    • Resistance, Continuity, Diode and Capacitance meter measurements
    • Voltage, current and power harmonics
    FLUKE VPS410-II-B - Indus.volt.probe set 500mhz 10:1 blue
      FLUKE - Indus.volt.probe set 500mhz 10:1 blue Model # VPS410-II-B

     
    • Ruggedized High-Working Industrial ScopeMeter® Voltage Probe Set
    • blue, 10:1, 500 MHz
    FLUKE VPS410-II-G - Indus.volt.probe set 500mhz 10:1 gray
      FLUKE - Indus.volt.probe set 500mhz 10:1 gray Model # VPS410-II-G

     
    • 10:1 attenuation value
    • 300 MHz bandwidth
    • CAT III 1000V, CAT IV 600V voltage
    • Blue color
    • Lead free / RoHS Compliant
    FLUKE VPS410-II-R - Industrial Voltage Probe Set 500 MHz 10:1 Red
      FLUKE - Industrial Voltage Probe Set 500 MHz 10:1 Red Model # VPS410-II-R

     
    • Bandwidth 500 MHz
    • Probe Ratio 10:1
    • Cable Length 1.2 meters
    • Input Impedance 10 MOhm
    • Capacitance 12 pF
    FLUKE VPS410-II-V - Industrial Voltage Probe Set 500 MHz 10:1 Green
      FLUKE - Industrial Voltage Probe Set 500 MHz 10:1 Green Model # VPS410-II-V

     
    • Bandwidth 500 MHz
    • Probe Ratio 10:1
    • Cable Length 1.2 meters
    • Input Impedance 10 MOhm
    • Capacitance 12 pF
    FLUKE VPS420-B - High Working Voltage Ruggedized Probe; Blue/Black
      FLUKE - High Working Voltage Ruggedized Probe; Blue/Black Model # VPS420-B

     
    • Ruggedized High-Working ScopeMeter Voltage Probe Set Blue/black
    • 100:1
    • 150 MHz
    • 1000V CAT III / 600V CAT IV
    FLUKE VPS420-G - High Working Voltage Ruggedized Probe; Grey/Black
      FLUKE - High Working Voltage Ruggedized Probe; Grey/Black Model # VPS420-G

     
    • Ruggedized High-Working ScopeMeter Voltage Probe Set
      Grey/black
    • 100:1
    • 150 MHz, 1000V CAT III / 600V CAT IV
    FLUKE VPS420-R - High Working Voltage Probe 100:1 Red & Black
      FLUKE - High Working Voltage Probe 100:1 Red & Black Model # VPS420-R

     
    • VOLTAGE PROBE SET 150 MHZ 100:1
    • 2000V (1000V CAT III TO EARTH)
    • High working voltage probe
    • 100:1 attenuation value
    • 150 MHz bandwidth
    • 2000V CAT III / 1200V CAT IV working voltage (voltage between probe tip and reference lead)
    • Red/black color
    FLUKE VPS420-V - High Working Voltage Ruggedized Probe; Green/Black
      FLUKE - High Working Voltage Ruggedized Probe; Green/Black Model # VPS420-V

     
    • Ruggedized High-Working ScopeMeter Voltage Probe Set Green/black 100:1
    • 150 MHz
    • 1000V CAT III / 600V CAT IV
    FLUKE VPS510-B - Voltage probe set 500 MHZ 10:1 Blue
      FLUKE - Voltage probe set 500 MHZ 10:1 Blue Model # VPS510-B

     
    • VOLT.PROBE SET 500MHZ 10:1 BLUE
    • Set of 4 probes (4-channel models) or 2 probes (2-channel models),
    • hand strap (fixed to instrument),
    • hanging strap,
    • USB cable,
    • Li-ion battery BP290, a FlukeView demo package and user manuals on CD-ROM
    FLUKE VPS510-G - Voltage probe set 500 MHZ 10:1 Grey
      FLUKE - Voltage probe set 500 MHZ 10:1 Grey Model # VPS510-G

     
    • Test Instruments & Gauges
    • Country of manufacture: United States
    • Manufacturer: Fluke
    FLUKE VPS510-R - Voltage Probe set 500 MHZ 10:1 Red
      FLUKE - Voltage Probe set 500 MHZ 10:1 Red Model # VPS510-R

     
    • Instrument dimensions 270 x 190 x 70 mm
    • Display 153mm full-color LCD with a fast update rate
    • CAT III 1000V/ CAT IV 600V overvoltage categories
    • Real-time sampling rates up to 2.5 GS/s and 400 ps resolution
    FLUKE VPS510-V - Voltage probe set 500 MHZ 10:1 Green
      FLUKE - Voltage probe set 500 MHZ 10:1 Green Model # VPS510-V

     
    • Instrument dimensions 270 x 190 x 70 mm
    • Display 153mm full-color LCD with a fast update rate
    • CAT III 1000V/ CAT IV 600V overvoltage categories
    • Real-time sampling rates up to 2.5 GS/s and 400 ps resolution

    Provide us your contact details one of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







    *Demonstrations can only be scheduled within the UAE