• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • FLUKE BC500 - AC Power Charger for Fluke 500 Series
      FLUKE - AC Power Charger for Fluke 500 Series Model # BC500

     
    • Replacement or AC space charger for Fluke 500 Series Battery Analyzers.
    • Provides power cord operation and charging for Fluke 500 Series Battery Analyzers.
    • Includes multiple pin adapters for international use.
    FLUKE BP500 - Lithium-ion battery; 7.4V 3000 mAh
      FLUKE - Lithium-ion battery; 7.4V 3000 mAh Model # BP500

     
    • Replacement or spare high-capacity 7.4 V 3000MAH Li-ion battery for Fluke 500 Series Battery Analyzers.
    • Compatible Products – Fluke 500 Series Battery Analyzer, Fluke 279 FC True-rms Thermal Multimeter
    FLUKE BT500 - 10-Pieces Replacement Probe Tips for Fluke 500 Series
      FLUKE - 10-Pieces Replacement Probe Tips for Fluke 500 Series Model # BT500

     
    • 10 replacement probe tips for Fluke 500 Series Battery Analyzers.
    • For use with the BTL10, BTL20 and BTL21 test probes.
    FLUKE BT510 - Battery Analyzer, 600V DC with BTL10 Basic Test Lead Set
      FLUKE - Battery Analyzer, 600V DC with BTL10 Basic Test Lead Set Model # BT510

     
    • Battery Voltage – During the internal resistance test; Fluke Battery Analyzers also measure the voltage of the battery under test
    • Discharge Volts – The Discharge mode collects the voltage of each battery multiple times at a user defined interval during a discharge or load test.
    FLUKE BT520 - Battery Analyzer 26.5 x 13.4 x 10.1 inches
      FLUKE - Battery Analyzer 26.5 x 13.4 x 10.1 inches Model # BT520

     
    • Measure the voltage of the battery under test
    • Measures unwanted residual ac component of the rectified voltage in dc charging and inverter circuits.
    • Measures the resistance of the intercell connection between batteries in a string.
    FLUKE BT521 - Advanced Battery Analyzer 24.8 x 11.5 x 9.4 inches
      FLUKE - Advanced Battery Analyzer 24.8 x 11.5 x 9.4 inches Model # BT521

     
    • Measure the voltage of the battery under test
    • Measures unwanted residual ac component of the rectified voltage in dc charging and inverter circuits.
    • Measures the resistance of the intercell connection between batteries in a string.
    FLUKE BTL-A - Voltage/Current Probe Adapter
      FLUKE - Voltage/Current Probe Adapter Model # BTL-A

     
    • Voltage/current probe adapter for Fluke 500 Series Battery Analyzers. The BTL-A allows connection of standard 4mm banana plug test leads or current clamp adapter.
    • Allows the BT521 Series Battery Analyzer to make AC and DC voltage and current measurements using the Fluke i410 AC/DC Current Clamp.
    FLUKE BTL10 - Basic Battery Analyzer Test Leads
      FLUKE - Basic Battery Analyzer Test Leads Model # BTL10

     
    • Standard battery test probes for Fluke 500 Series Battery Analyzers.
    • The BLT10 test probe is a kelvin test probe with built in save button designed to make easy battery impedance measurements
    FLUKE BTL20 - Intelligent Test Probe Set
      FLUKE - Intelligent Test Probe Set Model # BTL20

     
    • The BTL20 has a built in LCD display
    • Tri-light LED for pass/fail warning indication
    • Voice count for battery ID and integrated save button.
    FLUKE BTL21 - Intelligent Test Probe Set; w/Extenders & Temp Sensor
      FLUKE - Intelligent Test Probe Set; w/Extenders & Temp Sensor Model # BTL21

     
    • BTL21 Intelligent Test Probes with long and short extenders; built-in LCD display and speaker for visual and audio feedback and integrated infrared temperature sensor for taking temperature measurements on the negative battery post with every test
    MEGGER BITE2 - Battery Impedance Test Equipment
      MEGGER - Battery Impedance Test Equipment Model # BITE2

     
    • Determines condition of lead-acid and NiCd cells up to 7000 Ah
    • On-board Pass/Warning/Fail indications
    • Robust, repeatable instruments
    MEGGER BITE2P - Battery Impedance Test Equipment With Built in Printer
      MEGGER - Battery Impedance Test Equipment With Built in Printer Model # BITE2P

     
    • Determines condition of lead-acid and NiCd cells up to 7000 Ah
    • On-board Pass/Warning/Fail indications
    • Robust, repeatable instruments
    MEGGER BITE3 - Battery Impedance Test Equipment
      MEGGER - Battery Impedance Test Equipment Model # BITE3

     
    • Determines health of lead-acid cells up to 2000 Ah
    • On-line testing with Pass/Warning/Fail calculations
    • Measures impedance, interconnection resistance and cell voltage
    PCE Instruments CBA 10 - Car Battery Tester 12V
      PCE Instruments - Car Battery Tester 12V Model # CBA 10

     
    • The voltage meter PCE-CBA 10 is a car battery tester and allows fast and easy testing of 12V voltage starting batteries. The voltmeter has various test modes to determine the condition of the car battery.
    • The LC display of the voltmeter guides the user intuitively through the settings and various modes of operation. The voltmeter is suitable for car batteries of the type DIN, KIS, IEC, EN, GB, SAE and MCA.
    • To test the battery, the voltmeter can measure, inter alia, the starting current to determine the capacity of the car battery in the range between 30 and 100 Ah.
    PCE Instruments CBA 20 - Car Battery Tester 12/24V
      PCE Instruments - Car Battery Tester 12/24V Model # CBA 20

     
    • The voltage measuring device tests 12 V and 24 V starter batteries. The voltage measuring device checks the condition of the car battery via the battery voltage in the charging cycle, when starting or when idling.
    • The voltage measuring device uses the battery voltage to determine whether the starter battery is still functional. The voltage measuring device also shows the status of the battery in% on the LC display and makes a recommendation as to whether the starter battery should be replaced if necessary.
    • During the battery test with the voltage measuring device during the starting process of the car, the voltage drop of the battery is measured by the test device. The voltage difference provides information about the condition of the 12V or 24 V battery.

    Provide us your contact details one of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







      *Demonstrations can only be scheduled within the UAE

      Battery analyzers are devices that runs a battery through charge, discharge, wait and repeat cycles, while discharging it to measure capacity. It discharges a battery at differing current levels which simulates actual usage patterns, rejuvenates a battery that has been over-charged, and measures the internal battery resistance.

       

      A battery analyzer will allow users to define lower and upper measurement thresholds, which is then automatically compared to the measurements, result in a PASS, FAIL or WARN indication after each measurement while testing. It is the ideal test tool to troubleshoot, maintain, and test batteries that are used in critical battery back-up applications.

       

      Advantages:

      • Broad range of battery test functions, from resistance and DC voltage tests to full condition testing
      • Conducts testing on all types of stationary batteries
      • Easy analysis and reporting
      • Can effectively access discharged batteries

       

      Who uses Battery Analyzers?

      • Electrician engineers
      • UPS technicians
      • Facilities maintenance engineer
      • IT engineers

       

      Where are Battery Analyzers used?

      Uninterruptable Power Supply (UPS) systems in:

      • Airports
      • Banks
      • Data centers
      • Hospitals
      • All critical equipment that require back up power

       

      How to safely use Battery Analyzers?

      • Do not use explosive vapor, gas, or in wet or damp environments.
      • Do not apply more than the rated voltage, between the terminals or between each terminal and
      • Avoid simultaneous contact with battery and frame racks or hardware that may be grounded.
      • Measure a known voltage first to make sure that the device operates properly

       

      AABTools is the largest supplier for Fluke and Megger battery analyzers in the UAE. Shop now for battery analyzers online, or at our retail stores in Dubai, Sharjah, and Abu Dhabi.