Industrial Clamp Meters

• True RMS high current clamp meter
• 58mm jaws
• Current measurements to 2000A

• True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
• 40 mm jaw opening
• Highest resolution of 1 μA, measure up to 60 A

• Measurements of AC/DC current to 200A
• Also measures AC/DC voltage to 600V; continuity and resistance to 6000O
• 32mm jaw size

• 2000 A AC + DC True RMS, 1400 A AC, and 2000 A DC
• The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
• CAT IV 600 V, CAT III 1000 V rating for added user protection

• True-rms measurements for accuracy when measuring complex; non-sinusoidal waveforms
• 61 mm jaw opening
• Highest resolution of 1 µA; measure up to 60 A

• AC only clamp meter
• True RMS technology for enhanced accuracy
• Measures AC voltage; continuity and resistance

• True RMS AC/DC current measurements
• 34mm diameter jaws
• Measures AC current to 600A or 2500A with optional iFlex probes (sold separately)

• Connect your meter to your smartphone with Fluke Connect Measurements
• Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks
• CAT IV 600 V, CAT III 1000 V safety rating

• Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement for added flexibility without interference with measurement accuracy
• The removable magnetic display can be conveniently mounted where it is easily seen
• iFlex® Flexible Current Probe expands the measurement range to 2500 A AC

• Measure current to 600A; AC/DC voltage to 600V; resistance to 6000O and inrush/continuity
• Compatible with Fluke iFlex probes (sold separately) to allow measurements of current up to 2500A
• 34mm jaws

• A wireless Fluke Connect®-enabled clamp meter designed specifically for the needs of HVAC technicians
• Offers 200 µA DC current measurements to measure flame rod
• Extends resistance range to measure thermistors up to 60kΩ

• Non-contact infrared temperature measurements with laser pointer
• True RMS current and voltage measurements
• Peak hold captures inrush currents and transients

DISCONTINUED

DISCONTINUED

• 1.6″ (40mm) clamp jaw opening and large dual LCD display (9999 count)
• Measures 1/3-Phase True Power (kW), Apparent Power (kVA), Reactive Power (kVAR), Horsepower (HP), Power Factor, and Phase Angle with Lead/Lag indicator
• AC+DC µA current with 10nA resolution for flame rod tests

• Large 6000-digit LCD display
• True RMS
• LoZ voltage test, for ghost voltage measurement

• LoZ input for ghost voltage measurement
• 3-phase motor sequence test
• Temperature and μA measurements (flame sensor)

• LoZ input for ghost voltage measurement
• Flashlight and auto back light
• 3-phase motor sequence test

• 2m drop proof, ETL/Intertek certified 3rd edition CE
• Coil diameter: 0.75cm, bending length: 45.7cm
• Large LCD display for clear reading

• True RMS digital clamp meter.
• Large LCD.
• To measure inrush current, you need to press and hold the INRUSH button for 2 seconds

• 1000A AC/DC current measurement, 3 times/s sampling rate
• Auto/manual ranges selectable
• True RMS

• True RMS device
• Data hold
• Auto ranging.

• Data hold function.
• Auto ranging.
• Auto power-off function.

• Auto range; RS-232
• LCD backlight; Data hold
• Over-range display

• Auto range, 2 times/s  sampling rate
• Peak hold
• Manual range/stores 99 sets of data

• Multi function for AC-DC Voltage, AC current, Resistance, Diode, Continuity, Frequency, Temperature measurements
• 1000A full range overload protection for additional safety during measurement
• CAT II 600V / CAT III 300V safety rating with double insulation

• Measure voltage and current with your clamp jaw
• Faster, safer testing – all without touching a live wire – using FieldSense™ technology
• Complete 3-phase voltage and current tests in 3 quick steps

• Measure voltage and current with your clamp jaw
• Faster, safer testing – all without touching a live wire – using FieldSense™ technology
• Power quality indicator shows whether equipment or power line is faulty