Clamp Meters

• True RMS measurement
• 1000V AC/DC voltage measurement with overload protection
• Large LCD screen and display digits for better readability
• Dual Mode NCV detection and measurement

• True RMS, zero mode and continuity test
• NCV multi-segment display and audio/visual alarm
• 600V protection across all range

• TRMS measurement AC-DC Voltage and AC current measurement
• Multi function capable for Resistance, Diode, Continuity, Frequency measurements
• Big LCD display Clear white backlight for measurement is dark areas

• TRMS measurement AC-DC Voltage and AC current measurement
• Multi function capable for Resistance, Diode, Continuity, Frequency measurements
• Big LCD display Clear white backlight for measurement is dark areas

• High reliability, safety, and compact design
• 200A full range overload protection for additional safety during measurement
• CAT II 1000V / CAT III 600V safety rating

This product has been discontinued by the manufacturer
Alternate products: G9204-II

• Multi function for AC-DC Voltage, AC current, Resistance, Diode, Continuity, Frequency, Temperature measurements
• 1000A full range overload protection for additional safety during measurement
• CAT II 600V / CAT III 300V safety rating with double insulation

• 600 A ac current measurement
• Cat IV 300V / CAT III 600V safety rated
• 30 mm jaw size for numerous applications

• 999.0 A ac current measurement
• Cat IV 300V / CAT III 600V safety rated
• 30 mm jaw size for numerous applications

• Unique 40A high-precision low current measurement–0.01A high-resolution, 1.6% high-precision measurement
• The clamps are slim, lightweight, and portable, making them ideal for use in small, confined spaces

• Unique 40A high-precision low current measurement–0.01A high-resolution, 1.6% high-precision measurement
• The clamps are slim, lightweight, and portable, making them ideal for use in small, confined spaces
• The large backlight display facilitates readings in dark environments

• Rugged, reliable basic True-RMS clamp meter for measuring current up to 400 A
• Measures AC current to 400 A
• Measures AC voltage and DC voltage to 600 V

• Measures AC current to 400 A
• Measures AC voltage and DC voltage to 600 V
• Provides True RMS AC voltage and current for accurate measurements on non-linear signals

• Rugged, reliable True-RMS clamp meter with dc current and frequency measurements
• Measures AC and DC current to 400 A
• Measures AC voltage and DC voltage to 600 V

• True RMS high current clamp meter
• 58mm jaws
• Current measurements to 2000A

• True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
• 40 mm jaw opening
• Highest resolution of 1 μA, measure up to 60 A

• Measurements of AC/DC current to 200A
• Also measures AC/DC voltage to 600V; continuity and resistance to 6000O
• 32mm jaw size

• 2000 A AC + DC True RMS, 1400 A AC, and 2000 A DC
• The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
• CAT IV 600 V, CAT III 1000 V rating for added user protection

• True-rms measurements for accuracy when measuring complex; non-sinusoidal waveforms
• 61 mm jaw opening
• Highest resolution of 1 µA; measure up to 60 A

• AC only clamp meter
• True RMS technology for enhanced accuracy
• Measures AC voltage; continuity and resistance

• True RMS AC/DC current measurements
• 34mm diameter jaws
• Measures AC current to 600A or 2500A with optional iFlex probes (sold separately)

• Connect your meter to your smartphone with Fluke Connect Measurements
• Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks
• CAT IV 600 V, CAT III 1000 V safety rating

• Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement for added flexibility without interference with measurement accuracy
• The removable magnetic display can be conveniently mounted where it is easily seen
• iFlex® Flexible Current Probe expands the measurement range to 2500 A AC

• Measure current to 600A; AC/DC voltage to 600V; resistance to 6000O and inrush/continuity
• Compatible with Fluke iFlex probes (sold separately) to allow measurements of current up to 2500A
• 34mm jaws

• 400 A ac current measurement
• Cat IV 300V / CAT III 600V safety rated
• 30 mm jaw size for numerous applications

• A wireless Fluke Connect®-enabled clamp meter designed specifically for the needs of HVAC technicians
• Offers 200 µA DC current measurements to measure flame rod
• Extends resistance range to measure thermistors up to 60kΩ

• Measures 200A AC Current up to 100mA resolution
• Measures Frequency up to 1kHz with 0.01Hz resolution
• Autoranging with Auto Power Off and Data hold function

• Built-In Non-Contact Voltage Detector (NCV)
• Functions include: NCV, AC/DC Voltage, AC Current, Resistance, Capacitance, Frequency, Diode Test, Continuity
• 1.2″ (30mm) jaw size fits conductors up to 500MCM

• True RMS feature for accurate readings regardless of waveforms
• Built-In Non-Contact Voltage Detector (NCV)
• Functions include: NCV, AC/DC Voltage, AC Current, Resistance, Capacitance, Frequency, Type-K Temperature, Diode Test, Continuity

• Non-contact infrared temperature measurements with laser pointer
• True RMS current and voltage measurements
• Peak hold captures inrush currents and transients

• 1.6″ (40mm) clamp jaw opening and large dual LCD display (9999 count)
• Measures 1/3-Phase True Power (kW), Apparent Power (kVA), Reactive Power (kVAR), Horsepower (HP), Power Factor, and Phase Angle with Lead/Lag indicator
• AC+DC µA current with 10nA resolution for flame rod tests

• Large 6000-digit LCD display
• True RMS
• LoZ voltage test, for ghost voltage measurement

• LoZ input for ghost voltage measurement
• 3-phase motor sequence test
• Temperature and μA measurements (flame sensor)

• LoZ input for ghost voltage measurement
• Flashlight and auto back light
• 3-phase motor sequence test

• 2m drop proof, ETL/Intertek certified 3rd edition CE
• Coil diameter: 0.75cm, bending length: 45.7cm
• Large LCD display for clear reading

• True RMS digital clamp meter.
• Large LCD.
• To measure inrush current, you need to press and hold the INRUSH button for 2 seconds

• Auto range and 3/s sampling rate
• Data hold
• Max value hold

• 400A/600A AC/DC measurement with Hall-effect sensor and 3/s sampling rate
• Auto range and 3;999 display count
• Data hold

• Ergonomic and lightweight
• Auto range, 2~3 times/s sampling rate
• LCD backlight, data hold

• Auto range; 2~3/s sampling rate
• True RMS measurement
• NCV; Non-Contact Voltage testing function: induce electric field strength via the jaw

• Measuring AC/DC voltage; AC/DC current;
• Resistance; capacitance; frequency
• Temperature; performing NCV test

• True RMS
• Auto range, 3 times/s sampling rate
• MAX/MIN/Relative modes

• Designed for measuring AC/DC voltage
• Current; resistance; frequency; capacitance;
• Performs diode check and continuity test.

• Measures AC and DC voltage; AC current
• Resistance; frequency and temperature
• Performing diode check and continuity test.

• 1000A AC/DC current measurement, 3 times/s sampling rate
• Auto/manual ranges selectable
• True RMS

• True RMS device
• Data hold
• Auto ranging.

• Data hold function.
• Auto ranging.
• Auto power-off function.

• Auto range; RS-232
• LCD backlight; Data hold
• Over-range display

• Auto range, 2 times/s  sampling rate
• Peak hold
• Manual range/stores 99 sets of data

• Automatic power-off
• Auto ranging
• Built-in torch

• True RMS
• Auto range, 3 times/s sampling rate
• MAX/MIN/Relative modes

• Automatic power-off
• Autoranging
• HOLD function

• Measure voltage and current with your clamp jaw
• Faster, safer testing – all without touching a live wire – using FieldSense™ technology
• Complete 3-phase voltage and current tests in 3 quick steps

• Measure voltage and current with your clamp jaw
• Faster, safer testing – all without touching a live wire – using FieldSense™ technology
• Power quality indicator shows whether equipment or power line is faulty

UT220 series are 2000A AC/DC digitalclamp meters. This series ensures stable performance, safety, and reliability for measuring up to 2000A AC (and DC for UT221) current. It is designed with over-load protection for all ranges, perfect for all professionals measuring currents up to 2000A (2500A for UT222). 

• The fork current clamp PCE-CM 3 is used for quick and easy AC measurements. For current measurement, the fork current clamp is placed over the current-carrying conductor.
• It is particularly suitable for the measurement of AC in distributions and wherever circuits must not be interrupted. The current measuring range extends from 0 – 200 A.
• In addition to the current measurement, the fork current clamp can be used to measure DC and AC voltages up to 600V, resistance, capacitance and even temperatures. The measured values ​​are displayed on the illuminated display of the fork current clamp.

• It is specially developed for the tradesman in the field of heating, ventilation and air conditioning technology. This HVAC meter is ideal for many inspection and maintenance jobs in this area.
• It is a clamp meter that combines many gauges in one. It is possible with this meter to measure currents up to 1000 A in the DC and AC range via the clamp.
• Furthermore, voltages up to 600V AC / DC can be determined exactly. For quick and easy testing of electrical conductors, the HVAC meter is equipped with non-contact voltage detection.

• A unit that is suitable for service technicians, stationary use in repair departments in specialist shops and in laboratories. It is designed for current measurements up to 400 A AC.
• In addition to the current clamp function, the measuring clamp offers many functions that only a multi-meter otherwise has. It can also be used as an oscilloscope for simple maintenance applications.
• In the oscilloscope mode of the Clamp Meter, in addition to the direct and alternating voltage, the current can also be visualized as a graph. This has the advantage that the waveform of the current can also be displayed on the multi-meter.

• The PCE-360 is a Single-Phase Power Meter or clamp meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.
• It is used for the analysis of voltage(V), current(A), active power(kW), apparent power(kVA), reactive powe (kVar), power factor(cos Φ), phase angle(Φ), frequency(Hz), rotary field(UL > 50V), active energy(MWh), apparent energy(MVAh), reactive energy(MVArh), harmonics (1 to 63 order, via software), and waveform (via software).
• The meter’s large and easy-to-read screen displays up to 10 measurements simultaneously. In manual mode, the device stores up to 99 measurements directly.

• The PCE-830 Clamp Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Clamp Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, inter-harmonics, and asymmetric.
• Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The back-lit LCD, with high resolution, can show up to 35 parameters simultaneously. Up to 3 clips can be attached at the same time to the Clamp Meter.
• In data logger mode, it can save up to 17,470 readings (3 phases/4 conductors), in a simpler set up (1 phase/2 conductors) it can save up to 52,400 readings, split into 85 groups. All this makes the it the ideal instrument for taking measurements over long duration.

• The PCE-830 Clamp Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Clamp Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, inter-harmonics, and asymmetric.
• Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The back-lit LCD, with high resolution, can show up to 35 parameters simultaneously. Up to 3 clips can be attached at the same time to the Clamp Meter.

• It is designed to detect, indirectly, AC/DC current and frequency. It has a white LED integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.
• The reduced dimensions of this device allow for measurements to be taken in places with limited access. The back-lit display ensures that it is easy to read, even in places with limited light available, such as electrical cabinets or in cabling ducts.
• Testing voltage without contact helps when detecting dangerous power lines, and it allows makes it easier to detect the location of cuts in power lines.

• It is designed to detect, indirectly, AC/DC current and ohms. It has white LEDs integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.
• The reduced dimensions of this HVAC Meter allow for measurements to be taken in places with limited access. The back-light display ensures that it is easy to read, even in places with limited light available, such as electrical cabinets or in cabling ducts.
• Testing voltage without contact helps when detecting dangerous power lines, and it allows makes it easier to detect the location of cuts in power lines.

• This clamp meter was developed for the indirect measurement of AC/DC currents with high resolution. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this clamp meter.
• The small dimensions of this amperage clamp enable it to be used in places that are difficult to access.
• The large, illuminated display of these measuring clamps ensures very good readability even in dark locations, such as in switch cabinets and cable ducts.

• The Three-Phase Clamp Meter (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform.
• It comes with a built-in graphic display to show network analyzer values. Measured values can be both recorded and transferred to a PC for further analysis.
• It is a professional handheld device to determine several parameters. Thanks to the back-light display, it is possible to get an accurate reading of measured values even with poor light conditions.

• The flexible current clamp PCE-CM 40 is suitable for current measurements up to 3000 A AC.
• In addition to True RMS current measurement, the flexible current clamp is able to measure frequencies in the range of 50 to 400 Hz. The measurement of the current takes place via a flexible Rogowski coil.
• This voltage is proportional to the current flow through the electrical conductor. This makes it possible to measure very high currents with the flexible Rogowski coil, which has a diameter of 170 mm, the clamp can be used wherever conventional space clamps can not be used.

• The clamp meter PCE-DC 50 is a measuring device for measuring currents of up to 1000 A AC / DC and can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes.
• The enclosure diameter of the clamp is 48 mm. Thus, you can also perform measurements on cables with a large cross-section.
• This clamp has an integrated Bluetooth interface. Via this Bluetooth interface a connection to the PC or the smartphone can be established with the measuring pliers. This allows the measured data of the measuring clamp to be stored and analyzed. If the PC does not have a Bluetooth interface to connect the measuring pliers, a suitable Bluetooth adapter is included in the delivery.

• PCE-PCM 1 is a multipurpose digital multimeter or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption.
• The power analyzer aids in evaluating power and energy use in machines and electrical installations. The device’s compact design allows for measurements to be taken in the field and on the go.
• Up to 99 measurement values can be saved to the internal memory of the power meter. The meter features a USB port, allowing for quick and easy data transfer to a PC for detailed analysis.

• The PCE-GPA 50 current clamp is used to measure the current of 1- or 3-phase loads. This clamp is especially characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the current clamp.
• Here, in addition to the numerical measured values, the waveform of the phase can also be displayed by the current clamp. Likewise, the current clamp can be used to measure voltages. As a result, the current clamp is able to calculate effective, apparent and reactive power with the help of the phase angle. In addition, the current clamp can measure other network parameters such as the energy, power factor and harmonic.
• In addition to the extensive measuring functions, this current clamp distinguishes your data logger function. All measured values ​​can be stored by the current probe directly on a micro SD card.

• With the PCE-LCT 1 Voltmeter it is possible to measure leakage currents up to a range of 100 A. PCE-LCT 1 Voltmeter can measure leakage currents which appear when current flows through electrical conductors which are not designed for conduction current.
• The PCE-LCT 1 Voltmeter can detect leakage currents and show them on the display. With the help of the PCE-LCT 1 Voltmeter you can detect insulation failures in places where machines cannot be disconnected, however insulation must be checked, as for instance according to the VDE 701/702 standard.
• The PCE-LCT 1 Voltmeter measures current flow, voltage up to 600 V, resistance and continuity. The PCE-LCT 1 is the ideal instrument for electricians according to the VDE standard.

This product has been discontinued by the manufacturer.
Alternate products: Gazelle G9205, Fluke 324, Fluke 325.

• The digital multimeter is an ideal measuring device for the fast measurement of currents and voltages. To perform current measurements, a digital multimeter must be connected in series to the load.
• With this digital multimeter, current measurements directly on the supply line can be performed inductively without disconnecting them to switch on a digital multimeter. Thanks to this inductive current measurement, the risk of electric shock is drastically reduced because the operator has no direct contact with the supply line thanks to the digital multimeter.
• In addition to current measurement of up to 600 A AC, the digital multimeter can also measure voltages up to 600V AC / DC, resistors, capacitances and the voltage network frequencies.

• The digital multimeter is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the digital multimeter.
• Thus, with the digital multimeter, current measurements of up to 1000 A AC / DC are possible. The user can perform frequency measurements with this digital multimeter.
• This ensures contactless frequency measurement with the digital multimeter. Thus, the digital multimeter is a useful addition to the equipment of an electrician.

• The voltmeter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the voltmeter, or you can use the integrated clamp mechanism.
• By using the clamp of the voltmeter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it. You can also check the continuity with the voltmeter.
• Due to its compact design and light weight, the device is well-suited for mobile use. When using the clamp mechanism, it is also possible to run the voltmeter with one hand only.

• The multimeter is the ideal measuring instrument to measure leakage currents. This is made possible by the extensive measuring range of the multimeter.
• Also, current measurements up to 150 A AC can be made with the multimeter. To test supply lines with a current of up to 150 A, the multimeter for the corresponding cable cross-section can be opened up to 30 mm.
• In addition to the current measurement, the multimeter can also measure voltages up to 600V directly. Because of the current and voltage measurement, the multimeter is the perfect measuring instrument to carry out measurements and analyzes on, for example, three-phase networks.

• With the digital multimeter AC currents of up to 1000 A AC can be measured easily. At the same time, voltages of up to 1000V AC / DC can be measured with the digital multimeter. Thus, with the power current clamp, apparent power, reactive power and active power measurements up to 750 KW are possible.
• Another function of the digital multimeter is the measurement of the inrush current. Many consumers have a tremendously high current at the moment of switch-on. With a conventional digital multimeter such a measurement is not possible. For the digital multimeter this is not a problem.
• With the NCV (Not Connected Voltage) function of the digital multimeter, it can be checked whether a voltage is applied to a line without performing a contacting measurement. This makes the work much easier for the user thanks to the digital multimeter.

• The current clamp PCE-OCM 10 is characterized by the OLED display. The OLED display on this clamp makes it possible to read the display even in the dark, as it is self-luminous.
• The current clamp measures DC and AC up to 600 A. In addition to the regular current measurement, the PCE-OCM 10 current clamp can be used to measure start-up currents.
• AC voltage can be measured up to 750V AC and DC voltage even up to 1000V. Furthermore, the current clamp has the standard multimeter functions such as resistance measurement, diode test, capacitance measurement, continuity test, etc.

• The 393 FC CAT III 1500 V True-rms Clamp Meter with iFlex is designed for technicians who work in high voltage dc environment: solar arrays, wind power, electric railways, data centers battery banks for uninterruptible power supplies.
• The clamp will measure up to 1500 V dc, 1000 V ac, and up to 999.9 A dc or ac through the clamp jaw.
• The included iFlex flexible current probe extended ac current measurements up to 2500 amps.