Tile Tools

  DeWALT - Slide Table Wet Tile Saw & Leg Stand 220V Model # D24000S-QS
 

• Stainless steel rail system is intergrated into the tile saw frame; ensuring accurate cuts
• Cantilevering rail / cart system allows for 610 mm ripping capacity
• Low weight allows one person to transport and set up saw

  DeWALT - 54V XR Flex Volt Dual Handle Mixer – 9Ah, 220V Model # DCD240X2-GB
 

• 5 electronic speed setting dial (1 = 300 RPM; 2 = 450 RPM; 3 = 550 RPM; 4 = 650 RPM; 5 = 725 RPM)
• Dual handle ergonomic with critical width and angle dimensions; reduces user fatigue
• M14 threaded connector which is a standard fitment

  HUSQVARNA - Segmented Marble & Granite Diamond Blade, 400 x 25.4 mm, VARI-CUT S35 Turbo 400, Silver Model # 587905901
 

• High-quality finishing of the cut
• High speed in hard materials
• High speed in universal construction materials
• Ideal for concrete and hard materials

  DeWALT - Mixer Tools; 100mm X 600mm Model # DT4950-QZ
 

For wallpaper paste; gloss paint; emulsion; mortar and plaster.

  DeWALT - Mixer Tools; 120mm X 600mm Model # DT4951-QZ
 

For wallpaper paste; gloss paint; emulsion; mortar and plaster.

  DeWALT - Ceramic Tile Cutting Blade D250XB25.4XH8 Model # DT3733-XJ
 

  DeWALT - Tile Cutter 110mm 220V Model # DWC410-QS
 

• 1270 W Tile saw for cutting Marble Granite and other porcelain stones
• Target application are mainly for floor work; can be used with wet kit for wet operation to ensure longer life of the cutting blade
• No Bevel function

  DeWALT - Marble 306 x 48 x 10mm Model # DX3012
 

  DeWALT - Marble 354 x 48 x 10mm Model # DX3014
 

  DeWALT - Diamond Tile Blade 100 x 16mm Model # DX3101
 

  DeWALT - Diamond Tile Blade 115 x 22mm Model # DX3121
 

  DeWALT - Granite 356 x 40 x 10mm Model # DX3214
 

  DeWALT - Marble & Granite 115 x 22.2mm Model # DX3821
 

  DeWALT - Rim Blade Marble & Granite 100 x 20mm Model # DX3901
 

  GROZ - Paint Mixer 80mm X 400mm Length 1Pc Model # PMX/80
 

• Continue to gently work on the material till it is of desired
  consistency
• The mixer works best with a variable speed reversible drill machine with 400 – 600 watts minimum power.
• The mixer works best with a variable speed
  reversible drill machine with 400 – 600 watts minimum power.

  DeWALT - Marble & Granite 100 x 20mm Model # DX3801
 

  DeWALT - Marble & Granite 180 x 22.2mm Model # DX3861
 

  DeWALT - Marble & Granite 230 x 22.2mm Model # DX3881
 

  DeWALT - Rim Blade Marble & Granite 115 x 22.2mm Model # DX3921
 

  DeWALT - Rim Blade Marble & Granite 180 x 22.2mm Model # DX3961
 

  DeWALT - Rim Blade Marble & Granite 230 x 22.2mm Model # DX3981
 

  GAZELLE - Electroplated Blade 115mm 4.5in Model # ELP115
 

  GAZELLE - Electroplated Blade 180mm 7in Model # ELP180
 

  GAZELLE - Electroplated Blade 100mm 4in Model # ELP100
 

  DeWALT - Dual Handle Paddle Mixer 110v Model # DWD241-LX
 

• Powerful motor handles thicker, more viscous materials
• 3-speed dial for optimized control and performance
• Variable speed trigger for additional control

  DeWALT - Dual Handle Paddle Mixer 220v Model # DWD241-GB
 

• Powerful motor handles thicker, more viscous materials
• 3-speed dial for optimized control and performance
• Variable speed trigger for additional control

  Rubi - TS-66-Max Manual Tile Cutter – without Case, 66cm Cutting Length Model # 18926
 

• For intensive cutting of ceramic tiles.
• 800kg high performance single point breaker.
• Double guide for better visibility of the scoring and cutting line.
• Chromed steel guides, calibrated and rectified, with anti-corrosion treatment.

  Rubi - TS-66-Max Manual Tile Cutter with Carry Case, 66cm Cutting Length Model # 18922
 

• For intensive cutting of ceramic tiles.
• Transport case, with reinforced closures and hinges.
• 800kg high performance single point breaker.
• Double guide for better visibility of the scoring and cutting line.

  Rubi - TR-600-Magnet Manual Tile Cutter for Ceramic and Porcelain Tiles, with Carry Case Model # 17905
 

• Fast operating system by magnet, operable with one hand. Greater ease and speed of cutting.
• Reinforced construction elements. High breaking power.
• Swivel square with central pivot for fast and accurate measurement of angular cuts.

  Rubi - TZ-1300 Manual Tile Cutter for Ceramic and Porcelain tiles, with Carry Bag Model # 17953
 

• Smoother and more precise head movement.
• Large cutting capacity, up to 21 mm thickness. Ideal for large formats.
• Robust and folding structure for added strength and ease in transport.

  Rubi - Manual Tile Cutter Cut: 155cm, TZ-1550 Model # 17954
 

• Maximum power from the most advanced tile cutter on the market.
• Incredibly powerful breaker (up to 1500 kg), operable with one hand.
• Smoother and more precise head movement.

  Rubi - Manual Tile Cutter Cut: 102cm, TX-1020 MAX Model # 17915
 

• Breaker’s lock and unlocking system by trigger increases performance with both thick and thin materials.
• Great efficiency of the entire system.
• 1200 kg power breaker for cutting the hardest materials.

  Rubi - Manual Tile Cutter Cut: 125cm, TX-1250 MAX Model # 17921
 

• The professional manual cutters from the TX-MAX series are perfect for INTENSIVE cutting of all types of ceramic tiles.
• Powerful mobile crusher and front stop with central pivot axis, results simple and fast execution of corner cuts in porcelain tiles.
• TX-MAX manual cutters can handle stoneware, thanks to the high breaking force.

  Rubi - Manual Tile Cutter 85cm, TZ-850 Model # 17952
 

• Maximum power from the most advanced tile cutter on the market.
• Incredibly powerful breaker (up to 1500 kg), operable with one hand.
• Smoother and more precise head movement.

  Rubi - Manual Tile Cutter 102cm, TZ-1020 Model # 17951
 

• Maximum power from the most advanced tile cutter on the market.
• Incredibly powerful breaker (up to 1500 kg), operable with one hand.
• Smoother and more precise head movement.

  Rubi - TQ-75 Manual Tile Cutter, for Porcelain and Glazed Stoneware Tiles Model # 14908
 

• Mono-guide head with 6 radial bearings for a smoother and more precise operation
• Patented self-adjusting bearing system does not require any adjustment by the user
• Ideal for professional cutting of porcelain stoneware (AIa/BIa) and intensive tile (BIII) and enameled stoneware (BIIa)

  Rubi - TQ-102 Manual Tile Cutter, for Porcelain and Glazed Stoneware Tiles Model # 14909
 

• Mono-guide head with 6 radial bearings for a smoother and more precise operation
• Patented self-adjusting bearing system does not require any adjustment by the user
• Ideal for professional cutting of porcelain stoneware (AIa/BIa) and intensive tile (BIII) and enameled stoneware (BIIa)

  Rubi - Carbide Scoring Wheel 1/4″ (6 mm.) Model # 1945
 

Tungsten Carbide scoring wheel of high resistance and duration.

• For Wall tiles.
• Patented model with new high technology RUBI alloy.
• Maximum precision and resistant to wear.

 

  Rubi - Carbide Scoring Wheel 7/16″ (10 mm.) Model # 1946
 

• Spare wheel for TS, TR, Speed, Star, TF, Pocket, Rapid, Practic series tile cutters
• Tungsten carbide scoring wheels.
• Patented model with new high-tech RUBI alloy; maximum precision and wear resistance.

  Rubi - Carbide Scoring Wheel 3/8″ (8 mm.) Model # 1958
 

• Tungsten widia
• Lasts longer than steel
• Premium clean score

  Rubi - Plus Silver Carbide Scoring Wheel 3/8″ (8 mm.) Model # 1959
 

• For TX Rubi tile cutters
• Manufactured in highly resistant and durable tungsten carbide
• For porcelain, wall and floor tiles

  Rubi - Plus Extreme Carbide Scoring Wheel 7/8″ (22mm) Model # 1900
 

• Titanium-coated tungsten carbide cutting wheel for extra-long life
• Suitable for use on all surfaces
• For optimal cuts on hard ceramics with rough or structured surfaces

  Rubi - Plus Extreme Scoring Wheel 7/8″ (22mm) Model # 1901
 

• Ball nearing mounted providing a soft scratch
• Made of Tungsten carbide with a superficial Titanium treatment
• Suitable for all surfaces for sharp scoring in hard ceramics with rough or structured surfaces

  Rubi - Endure Scoring Wheel 3/8″ (8mm) Model # 1906
 

• 8 mm scoring wheel for TR, TS and TF, Speed, Star and Fast Tile Cutters
• Made of high-quality tungsten carbide
• Excellent for cuts in ceramic tiles with a high cutting difficulty, especially with rough or structured surface finishes

  Rubi - Carbide Scoring Wheel 13/16″ (18 mm.) Model # 1950
 

• Rubi 3/4 in. scoring wheel includes a roller guide made of tungsten carbide highly resistant to wear
• The 3/4 in. scoring wheel by Rubi allows for cuts without chipping the enamel or deviations
• For rough or difficult-to-cut ceramics

  Rubi - Scoring Wheel Gold 7/8″ (22 mm.) Model # 1964
 

• Cutting wheel Ø 22 mm. GOLD Especially for cutting hard ceramics.
• Wheels made of Tungsten Carbide and treated by titanium.
• Cutting wheel with a surface treatment of titanium.

  Rubi - Scoring Wheel Extreme 7/8″ (22 mm.) Model # 1907
 

• 22 mm scoring wheel for TR, TS and TF, Speed, Star and Fast Tile Cutters
• Ball bearing mounted providing a soft scratch and a life of 300%, compared to SILVER scoring wheels
• Made of Tungsten carbide with a superficial Titanium treatment

  Rubi - Plus Scoring Wheel Endure 3/8″ (8 mm.) Model # 1903
 

• RUBI ENDURE scoring wheels are made of high-quality tungsten carbide.
• Its unitary grinding guarantees an exact and precise incision angle in all units.

  Rubi - Circular Cutter Kit 320cm, TC-125 Model # 51902
 

• PRECISE cutting thanks to the SLIM SYSTEM guide system.
• Equipped with a carbon steel plate on adjustable stainless steel radial bearings.
• Double dust reduction system: suction or wet system.

  Rubi - Circular Saw 115-125mm, TC-125 Model # 51959
 

• Accurate cut thanks to the Slim System guides. Equipped with a carbon steel slide on adjustable stainless steel radial bearings.
• Double dust reduction system: suction or wet system.
• Height-adjustable cutting head (plunge effect), hinged from 0° to 45°. (mitre). Fast adjustment system.

  Rubi - HIT-1200-N Manual Tile Cutter with Carry Bag, 75cm Cutting Length Model # 26962
 

• Rubi HIT 1200 N hand tile cutter for fast, repetitive cutting of all commercially available ceramic tiles.
• Magnetic system ensures one-handed use.
• Chrome, solid, corrosion-resistant rails with a diameter of 20 mm.

  Rubi - Tile Cutter Without Bag Cut: 120cm, HIT-1200 N Model # 26961
 

• 800 KG HIGH BREAKING FORCE for cutting all kinds of ceramic and vitrified tiles up to 1200 MM / 120 CM / 4 Feet / 48 Inches
• CHROMED & RECTIFIED SOLID Ø 20MM Guides made of Steel with Anti Corrosion Treatment. NEW MAGNET System enables one handed use and great visibility during scoring.
• NEW BEARING SYSTEM for the extremely smooth movement resulting in accurate and precise cuts

  Rubi - Slim System Tile Cutter Cut: 320cm Model # 18911
 

• Facilitates a straight cut without deviations.
• Offers high quality performance.
• Progressive separation of the material, reducing the risk of breakage.

  Rubi - Slim System Easy Transporter 320cm Max Load: 60kg with 10 Suction Pads Model # 18910
 

• Ideal system to transport of large porcelain sheets formats
• Works well in conjunction with the Rubi Skim Cutter
• Includes two retractable and adjustable guides 160 to 320 cm. and 10 suction clamping suction cups

  Rubi - Slim System Cutter Guide 1100mm Model # 18913
 

• Additional Slim Cutter Guide for large format tile
• Extend the cutting capacity by 43 inch

  Rubi - Slim Breaker Model # 18917
 

• Auxiliary breaker for the cut of slim porcelain slabs or large tiles.
• To separate thicknesses of 8 mm or more.
• Soft-grip handle for a better comfort and ergonomic.

  Rubi - Slim Easy Trans Supplementary Guide Set Model # 18819
 

• Works with the Rubi SLIM EASYTRANS Transport Kit to increase the lifting capacity by up to 154 lbs. (70 kg.)
• Each crossbar incorporates a supplementary suction cup to increase maximum load
• Adjustable in both width and length, giving the conveyor SLIM EASYTRANS a rigidity in any format and form of the piece of ceramic sheet

  Rubi - Slab Trans Heavy Duty retractable from 165-320cm Model # 18936
 

• Conveyor / frame for the handling of ceramic sheet
• Weight capacity: 310 lb. (140 kg.)
• Works well with Rubi SLIM Cutter and TC-125 cutting systems

  Rubi - Slab Trolley Max load: 140kg 360x160cm Model # 18934
 

• Transport system for large format tiles, porcelain panels and light slabs
• Can act as a support when back-buttering thin porcelain tile panels
• Load capacity: 308 lb. (140 kg.) – includes material and conveyor

  Rubi - Slab Table, 250 kg Model # 18935
 

• Workbench for cutting and handling large-format ceramic sheets using the tools of the SLAB SYSTEM range.
• The extra reinforced aluminum bars give the SLAB TABLE a high rigidity and great stability. Giving it a maximum load capacity of up to 250 kg.
• The spacing of its 5 bars, made of aluminum, allows the user to drill and cut without fear of damaging the table itself.

  Rubi - Double Suction Cup Model # 66900
 

• Body made of highly resistant aluminum. With ergonomic handle for greater comfort
• Maximum load capacity : 176.37 lb. (80 kg)
• All RUBI suction cups have been subjected to constant quality tests to ensure and guarantee proper resistance during use

  Rubi - Suction Cup with Vacuum Pump Model # 18919
 

• Manual vacuum pump is easily activated with a single finger
• Equipped with a safety mark that indicates loss of suction and reminds the user to pump again to retain the vacuum load in the suction cup
• Manual pressure release valve to easily remove the suction cup from the material

  Rubi - Triple Suction Cup Model # 66904
 

• Body made of highly resistant aluminum. With ergonomic handle for greater comfort
• Maximum load capacity of 220.46 lbs (100 kg)
• All RUBI suction cups have been subjected to constant quality tests to ensure and guarantee proper resistance during use

  Rubi - Rough Surfaces Suction Cup Model # 66929
 

• Single suction cup for handling ceramic tiles with rough or slightly structured surfaces
• Lightweight polycarbonate body
• Reinforced lever base for greater tensile strength

  Rubi - Rough Surfaces Double Suction Cup Model # 66952
 

• Suction cup for the manipulation of ceramic tiles with rough or slightly structured surfaces
• Metal reinforcement in lever base for greater resistance to traction
• Injected aluminum body

  Rubi - 18V Cordless Electric Paddle Mixer Brushless Motor 50-60Hz , Rubimix E-10 Energy Model # 26965
 

• BRUSHLESS engine. It does not need maintenance and increases the life of the product.
• Brushless motor with 360W Power. Maintenance-free and increases the product’s lifespan.
• Progressive switch (RPM control). Switch safety lock. Prevents unintentional start-up.

  Rubi - 18V 5AH Energy Battery Model # 26966
 

• LED indicator of battery charge level.
• 18 V to 5 Ah Li – ion battery
• To be used with Rubimix E-10 Energy Mixer from Rubi

  Rubi - Electric Mixer with Paddle 220V 1200W 50/60HZ, Rubimix-9 N Model # 25944
 

• With new and improved handle, superior comfort and stability.
• 2 speed gearbox (0-620 RPM & 0-810 RPM) and progressive switch optimises material mixing
• Interchangeable mixing paddles with M14 connection – greater versatility

  Rubi - Electric Mixer with Paddle 110V, Rubimix-9 N Model # 25942
 

• Powerful 1200 Watt Motor.
• 2 Speed Gearbox: 0-620 & 0-180 RPM
• M14 Direct Connect Tread Fitting.

  Rubi - Electric Mixer 210/240V 50/60HZ, Rubimix-9 Duplex Model # 25943
 

• Dual bi-material grip handle. Improved ergonomics and comfort.
• Electronic control to optimize mixing.
• Double mixing paddle to increase work performance.

  Rubi - Electric Mixer 1800W 230V 50/60HZ, Rubimix-9 N Plus Model # 26922
 

This product has been discontinued by the manufacturer.

• Quick and easy to change the brushes. High comfort.
• Powerful 1800W motor for greater mixing capacity and high reliability.
• New and improved handle. Comfort and stability.

  Rubi - Rubber Buckets Model # 60202
 

• 14.5 Gals (65 liters) capacity
• Hard plastic bucket designed for mixing any material with any mixer

  Rubi - ND-200 220V Portable Electric Tile Cutter Model # 45915
 

• Lightweight and compact, ideal for working in small spaces.
• Stainless steel folding table for more durability.
• Fast positioning system at 45° for improved ease of use.

  Rubi - DX-350-N-1000 220V Electric Tile Cutter Model # 52905
 

• Motor assembly mounted on sliding bearings for maximum precision and reliability.
• Aluminium structure for a lightweight machine with maximum resistance to working conditions.
• High performance plunge effect for maximum cutting height.

  Rubi - DX-350-N-1300 220V Electric Tile Cutter Model # 52915
 

• Motor assembly mounted on sliding bearings for maximum precision and reliability. Perfect finishes.
• Aluminium structure. Lighter cutter with maximum resistance to working conditions.
• High performance plunge effect. Maximum cutting height.

  Rubi - Laser & Level Electric Cutter 230V 50HZ, DX-250 PLUS 1000 Model # 52900
 

This product has been discontinued by the manufacturer.

• Equipped with protective head for safety in the use of segmented blades.
• High performance plunge effect. Maximum cutting height.
• Motor assembly mounted on sliding bearings for maximum precision and reliability. Perfect finishes.

  Rubi - Laser & Level Electric Cutter 230V 50HZ, DX-250 PLUS 1400 Model # 52910
 

This product has been discontinued by the manufacturer.

• Machine with movable cutting head for total versatility .
• For all types of ceramic tiles and construction materials such as marble, granite, briquettes and refractory bricks.
• Aluminum structure. Lighter and maximum resistance during transport conditions.

  Rubi - DC-250-1200 220V Electric Tile Cutter Model # 55941
 

• Head height adjustment allowing to adjust the cutting height.
• Extruded aluminium tables, removable for an easy cleaning of the machine.
• Folding legs with built-in wheels for easy carrying.

  Rubi - DU-200-Evo-850 220V Electric Tile Cutter Model # 54975
 

• Built-in foldable legs for quick installation
• With wheels and handle for easy transport and handling
• Bi-material handle for improved ergonomics

  Rubi - Roller Table Extension for DU/DC/DCX/DS/DX Model # 51914
 

• Increases work surface for large format tiles
• Features rollers to simplify movement of the tiles
• Fits to DU/DC/DCX/DS/DX series tile cutters

  Rubi - Side Table Extesion for DV/DC/DCX Model # 54993
 

• Increases work surface for large format tiles
• Fits to DV/DC/DCX series tile cutters

  Rubi - 120cm Longitudinal Side Stop For DV-200-1000 Model # 54994
 

• Ideal for longitudinal locking of large format pieces
• Maximum side-locking range of 41 cm
• For DV-200-1000 tile cutter only.

  Rubi - Lateral Stop DC/DCX/DS/DX Model # 54822
 

• Facilitates positioning of the tile, while reducing the percentage of errors.
• Fits DC/DCX/DS/DX series tile cutters
• Works with DW-250-NL (up to 2012)

  Rubi - Tile Fixer for DV/DC/DS/DX Model # 51916
 

• Fixes tiles during cutting to reduce sudden movements
• For fixing of the ceramic and perfect cutting measure along its length
• Fits DV/DC/DS/DX series tile cutters

  GAZELLE - Marble/Granite Cutting Blades 100mm Model # GMG100
 

• Diamond blade for cutting marble and granite

  GAZELLE - Marble/Granite Cutting Blades 115mm Model # GMG115
 

• Diamond blade for cutting marble and granite

  GAZELLE - Marble/Granite Cutting Blades 180mm Model # GMG180
 

• Diamond blade for cutting marble and granite

  GAZELLE - Marble/Granite Cutting Blades 230mm Model # GMG230
 

  GAZELLE - Marble/Granite Cutting Blades 300mm Model # GMG300
 

  GAZELLE - Marble/Granite Cutting Blades 350mm Model # GMG350
 

  GAZELLE - Marble/Granite Cutting Blades 400mm Model # GMG400
 

  GAZELLE - Tile Cutting Blades 100mm Model # GRT100
 

• These diamond blades have been specifically designed for cutting ceramic and stone tiles.
• The continuous rim is designed to achieve a smooth and fine edge.

  GAZELLE - Tile Cutting Blades 115mm Model # GRT115
 

• These diamond blades have been specifically designed for cutting ceramic and stone tiles.
• The continuous rim is designed to achieve a smooth and fine edge.

  GAZELLE - Tile Cutting Blades 180mm Model # GRT180
 

• These diamond blades have been specifically designed for cutting ceramic and stone tiles.
• The continuous rim is designed to achieve a smooth and fine edge.

  GAZELLE - Tile Cutting Blades 230mm Model # GRT230
 

• These diamond blades have been specifically designed for cutting ceramic and stone tiles.
• The continuous rim is designed to achieve a smooth and fine edge.

  GAZELLE - Tile Cutting Blades 100mm 4in Thin blade Model # GXT100
 

  GAZELLE - Tile Cutting Blades 115mm 4.5in Thin blade Model # GXT115
 

  Rubi - Ceramic Block for the cleaning of diamond blades Model # 05973
 

• 3″ x 1″ thick
• Designed to sharpen and reactivate diamond blades, as they may have been glazed over by cutting super hard porcelain
• Diamond Blades must be used with diamonds exposed properly through frequent dressing

  Rubi - Ceramic Block-N for diamond blades Model # 05974
 

• Specifically designed to bring diamonds to the edge of diamond blades when cutting porcelain.
• It is recommended to use the cleaning block periodically (every few short) to keep the diamond blade in perfect working order.

  Rubi - Water Pump 230v 50Hz, F-180 Model # 56916
 

• Rubi Replacement Water Pump for DW & DU Wet Saws. (NOT the NL Models)
• 240 Volt.

  Rubi - Ceramic Tiles Continuous Rim Diamond Blade 115mm, CSV-115 PRO Model # 25910
 

• Diamond blade
• Replacement for tile cutters
• Continuous rim

  Rubi - Ceramic Tiles Continuous Rim Diamond Blade 125mm, CSV-125 PRO Model # 31915
 

• Blade for general cut of ceramic tiles as wall tile, floor tiles, porcelain
• Best finish for ceramic tiles and other stone coating materials less than 1″ (25 mm) thick
• Only for straight cuts, not suitable for mitering with angle grinder

  Rubi - Turbo Viper Diamond Blade 115mm, TVR-115 SUPERPRO Model # 30986
 

• Recommended blade to cut hard materials such as granite, rustic tiles, clinker, quartzite, slate and porcelain tiles
• Robust and reinforced blade
• Can withstand high tensile forces at blade edges

  Rubi - Electroplated Cutting and Grinding Diamond Blade 115mm, ECD-115 2IN1 SUPERPRO Model # 31964
 

• For cutting and grinding natural stone, all kind of ceramic tiles and synthetic materials
• For adjustment cuts and grinding on all types of porcelain and hard materials
• For cutting materials greater than 3/4″ (20 mm) thickness

  Rubi - Porcelain Tiles Diamond Blade 115mm, CPJ-115 SUPERPRO Model # 32932
 

• For cutting hard porcelain tiles with best performance
• Specially designed for high speed straight cuts
• Not suitable for mitre cutting

  Rubi - Porcelain Tiles Diamond Blade 125mm, CPJ-125 SUPERPRO Model # 32933
 

• For cutting hard porcelain tiles with best performance
• Specially designed for high speed straight cuts
• J-Slots on the rim increase cutting speed on hard porcelain tiles, while reducing the stresses generated throughout the cut

  Rubi - FORAGRES – 1/4 In. Diamond Tile Drill Bit (6mm) – for Ceramic, Porcelain Tiles, Marble and Granite Model # 05988
 

• For dry drilling in ceramic, porcelain, natural stone and other materials.
• Maximum operating speed 14,000 rpms
• Usable with grinder

  Rubi - FORAGRES – 5/16 In. Diamond Tile Drill Bit (8mm) – for Ceramic, Porcelain Tiles, Marble and Granite Model # 05989
 

• For dry drilling in ceramic, porcelain, natural stone and other materials.
• Maximum operating speed 14,000 rpms
• Usable with grinder

  Rubi - FORAGRES – 3/8 In. Diamond Tile Drill Bit (10mm) – for Ceramic, Porcelain Tiles, Marble and Granite Model # 05990
 

• For dry drilling in ceramic, porcelain, natural stone and other materials.
• Maximum operating speed 14,000 rpms
• Usable with grinder

  Rubi - FORAGRES – 1/2 In. Diamond Tile Drill Bit (12mm) – for Ceramic, Porcelain Tiles, Marble and Granite Model # 05991
 

• For dry drilling in ceramic, porcelain, natural stone and other materials.
• Maximum operating speed 14,000 rpms
• Usable with grinder

  Rubi - Dry Cutting Diamond Drill Bit 3/4″ 20MM M14 Model # 04910
 

• Dry Cut Only. Diamond drilling set for wall and floor tiles.
• For the Hole Cutting in Ceramic tiles and Porcelain tiles.
• For use with an angle grinder.

  Rubi - Dry Cutting Diamond Drill Bit 1 1/8 28MM M14 Model # 04911
 

• Dry Cut Only. Diamond drilling set for wall and floor tiles.
• For the Hole Cutting in Ceramic tiles and Porcelain tiles.
• For use with an angle grinder.

  Rubi - Dry Cutting Diamond Drill Bit 1 3/8″ 35MM M14 Model # 04912
 

• Dry Cut Only. Diamond drilling set for wall and floor tiles.
• For the Hole Cutting in Ceramic tiles and Porcelain tiles.
• For use with an angle grinder.

  Rubi - Dry Cutting Diamond Drill Bit 1 3/4″ 43MM M14 Model # 04913
 

• Dry Cut Only. Diamond drilling set for wall and floor tiles.
• For the Hole Cutting in Ceramic tiles and Porcelain tiles.
• For use with an angle grinder.

  Rubi - Dry Cutting Diamond Drill Bit 2″ 50MM M14 Model # 04914
 

• Dry Cut Only. Diamond drilling set for wall and floor tiles.
• For the Hole Cutting in Ceramic tiles and Porcelain tiles.
• For use with an angle grinder.

  Rubi - Dry Cutting Diamond Drill Bit 2 3/8″ 60MM M14 Model # 04915
 

• Dry Cut Only. Diamond drilling set for wall and floor tiles.
• For the Hole Cutting in Ceramic tiles and Porcelain tiles.
• For use with an angle grinder.

  Rubi - Dry Cutting Diamond Drill Bit 3″ 75MM M14 Model # 05992
 

• Dry Cut Only. Diamond drilling set for wall and floor tiles.
• For the Hole Cutting in Ceramic tiles and Porcelain tiles.
• For use with an angle grinder.

  Rubi - Drygres Drill Bits 4Drill 6MM Model # 05923
 

• The drilling depth of the DRYGRES 4DRILL is 36 mm for the diameters 6, 8 and 10 mm, and 40 mm for the diameters 12, 14 and 20 mm.
• All DRYGRES 4DRILL burs have a wax inside.
• The wax melts with the use of the drill bit and improves cooling and removal of drilling debris.

  Rubi - Drygres Drill Bits 4Drill 8MM Model # 05924
 

• The DRYGRES 4DRILL diamond drill range is recommended for drilling all kinds of ceramic tile, in particular porcelain stoneware, and other coating materials such as marble and granite.
• Measurement Ø 8 Mm. Maximum drilling length-40mm

  Rubi - Drygres Drill Bits 4Drill 10MM Model # 05926
 

• Minimum work speed: 2500 rpm.
• Hexagonal connection without hammer.
• Ideal for battery-powered drills.

  Rubi - Drygres Drill Bits 4Drill 12MM Model # 05927
 

• DRYGRES 4DRILL diamond drill bits are designed for use with electric drills (including cordless drills). Hexagonal connection of drill bits with 13 mm head.
• The drilling depth of the DRYGRES 4DRILL is 36 mm for the diameters 6, 8 and 10 mm, and 40 mm for the diameters 12, 14 and 20 mm.
• All DRYGRES 4DRILL bits have a wax inside. The wax melts with the use of the drill bit and improves cooling and removal of drilling debris.

  Rubi - Drygres Drill Bits 4Drill 14MM Model # 05928
 

• DRYGRES 4DRILL diamond drill bits are designed for use with electric drills.
• Hexagonal connection of drill bits with 13 mm head.
• The drilling depth of the DRYGRES 4DRILL is 36 mm for the diameters 6, 8 and 10 mm, and 40 mm for the diameters 12, 14 and 20 mm. All DRYGRES 4DRILL bits have a wax inside.

  Rubi - Drygres Drill Bits 4Drill 20MM Model # 05929
 

• EXTRA long-life due to resistance welding of diamond particles and metal alloy. These tile drill bits are amongst the best on the market in terms of number of holes.
• Especially designed for drilling porcelain tiles. Also suitable for drilling other porcelain materials and natural stone.
• For bathrooms, kitchens, DIY, pools and large formats.

  Rubi - Multidrill Guide Max: 83mm, centering hole 6-12mm Suction cup 110mm Model # 50944
 

• Fixing by suction cup. It allows to realize horizontal and vertical drill holes in the exact place, avoiding the displacement of the bit.
• Compatible with both dry cutting bits and wet cutting bits (required MULTRIDRILL guide tank ref 50947).
• It incorporates centering holes for drill bits from Ø 6 to 12 mm.

  Rubi - Multidrill Plus Guide Max:120mm centering hole 6-14mm Suction cup 120mm Model # 51908
 

• The MULTIDRILL PLUS guide allows efficient centering in both dry and wet cutting hole.
• The MULTIDRILL PLUS guide is fixed by means of a suction cup, directly on the surface to be drilled, either horizontally or vertically.
• Thanks to the RM suction cup, the MULTIDRILL PLUS guide is fixed to smooth, rough or slightly structured surfaces.

  Rubi - Tank 1200ml and 2m Hose for Multidrill Guide Model # 50947
 

• Allows for proper cooling of FORAGRES, MINIGRES and EASYGRES wet cutting bits
• 40.6 fl oz tank capacity, with manual pressure pump
• Includes 6.6 ft. (2 m) of hose

  Rubi - Diamond Polishing Pad Grain 60 55x90mm Model # 61974
 

• # 60, # 120 and # 200 for polishing.
• Wet use is recommended.
• Different grit sizes:
• Semi-flexible. Good adaptation to the user’s hand.

  Rubi - Diamond Polishing Pad Grain 120 55x90mm Model # 61975
 

• Rubi® Manual diamond polishing pads The range of RUBI manual diamond polishing pads is ideal for edge grinding and polishing, both for surface cuts of natural stone and ceramic tiles.
• The RUBI manual diamond polishing pads are semi-flexible diamond and their EVA body means they have excellent adaptation to the user’s hand.
• The grip has a side slit that increases the ergonomics of the block and reduces hand fatigue during use.

  Rubi - Diamond Polishing Pad Grain 200 55x90mm Model # 61976
 

• Rubi® Manual diamond polishing pads The range of RUBI manual diamond polishing pads is ideal for edge grinding and polishing, both for surface cuts of natural stone and ceramic tiles.
• The RUBI manual diamond polishing pads are semi-flexible diamond and their EVA body means they have excellent adaptation to the user’s hand.
• The grip has a side slit that increases the ergonomics of the block and reduces hand fatigue during use.

  Rubi - Diamond Polishing Pad Grain 400 55x90mm Model # 61977
 

• Rubi® Manual diamond polishing pads The range of RUBI manual diamond polishing pads is ideal for edge grinding and polishing, both for surface cuts of natural stone and ceramic tiles.
• The RUBI manual diamond polishing pads are semi-flexible diamond and their EVA body means they have excellent adaptation to the user’s hand.
• The grip has a side slit that increases the ergonomics of the block and reduces hand fatigue during use.

  Rubi - Steel Notched Trowel 11″ 1/8×1/8 (3×3 mm) Model # 65989
 

• Rustproof stainless steel blade
• Comfortable and durable rubber grip
• Protection by clear coat

  Rubi - Steel Notched Trowel 11″ 1/4×1/4 (6x6mm) Model # 65982
 

• Rubi 65982 6mm Wooden Handle 
• Hardened Steel Tile Trowel Rubi 65982
• square notch professional tile trowel manufactured to be highly resistant to wear with a comfortable wooden handle. 

  Rubi - Steel Notched Trowel 11″ 3/8×3/8 (8×8 mm) Model # 65984
 

• Rubi 65984 8mm Wooden Handle Hardened Steel Tile Trowel.
• Rubi 65984 square notch professional tile trowel manufactured to be highly resistant to wear with a comfortable wooden handle..

  Rubi - Steel Notched Trowel 11″ 13/32×13/32 (10×10 mm) Model # 65985
 

• Steel plate
• special high wear resistance with corrosion protection by clear coat
• Stainless steel plate special high wear resistance (INOX).

  Rubi - Steel Notched Trowel 11″ 1/2×1/2 (12x12mm) Model # 74947
 

• Wooden Handle for Comfort
• Hardened Steel
• For Floor Tiling

  Rubi - Steel Notched Trowel 11″ (6X6mm) Model # 25903
 

• Rubi Basic Line Square Notched Trowel
• 6×6
• open plastic Handle
• Rubi Trowel Plate made out of steel

  Rubi - Steel Notched Trowel 11″ (8X8m) Model # 25905
 

• The trowels and notched trowels with open bi-colour plastic handles have a special high wear resistant steel plate and corrosion protection with colourless varnish (STEEL).
• The sheet on the trowels and notched trowels with open bi-colour plastic handle measures 28 x 12 cm.
• One of the features of all RUBI trowels and notched trowels is the perfect flatness of the plate.

  Rubi - Steel Notched Trowel 11″ (10X10m) Model # 25906
 

• The trowels and notched trowels with open bi-colour plastic handles have a special high wear resistant steel plate and corrosion protection with colourless varnish (STEEL).
• The sheet on the trowels and notched trowels with open bi-colour plastic handle measures 28 x 12 cm.
• One of the features of all RUBI trowels and notched trowels is the perfect flatness of the plate.

  Rubi - Steel Notched Trowel 11″ (12X12m) Model # 25907
 

• The trowels and notched trowels with open bi-colour plastic handles have a special high wear resistant steel plate and corrosion protection with colourless varnish (STEEL).
• The sheet on the trowels and notched trowels with open bi-colour plastic handle measures 28 x 12 cm.
• One of the features of all RUBI trowels and notched trowels is the perfect flatness of the plate.

  Rubi - Plastic Trowel with Sponge 28×19.5×2.5cm Model # 20924
 

• Floats for grout cleaning and finishing of joints.
• The PLUS model has longitudinal cuts for increased performance in wiping away dirt.
• Polyurethane Sponge

  Rubi - Rubber Grout Trowel 22.5x10x1.5cm Model # 10607
 

• RUBI has a wide range of rubber floats for grouting ceramic tiles, with ergonomic plastic handles.
• PRO grout floats by RUBI are available in different hardnesses of rubber for the best finish according to the grout joint width.
• One of the PRO grout float models features a white abrasion resistant rubber sheet, and offers a high flexibility, ideal for filling joints up to 3 mm wide. This flexibility ensures homogeneous joint filling and perfect compaction of the grouting material.

  Rubi - Tile Beating Block with Rubber 40×14.5cm Model # 72980
 

• RUBI tile beating blocks are designed so that professional tile fixers can ensure a good positioning and a good level of adhesive coverage during fixing.
  
• RUBI manufactures its tile beating blocks using waterproof and highly abrasion resistant wood with excellent resistance to water and moisture.
  
• The most striking feature of the RUBI tile beating blocks is their perfect flatness, owing to which, professional tile fixers can have the utmost confidence in the product.

  Rubi - Nipper for Porcelain Tiles Max: 1cm Model # 83942
 

• Great for mosaic work
• Used for cutting and shaping porcelain, glass or ceramic tiles
• With tungsten carbide scoring wheels with surface treatment of titanium for longer treatment

  Rubi - Nipper for Ceramic Tiles Model # 65926
 

• Tungsten Carbide edge of great hardness.
• With Tungsten Carbide edge for greater durability.
• For grinding straight cuts in tile and ceramic flooring.

  Rubi - 3 speed Grout Out Machine 230V, Rubiscraper-250 Model # 66941
 

• Ergonomic design and bi-material finishing, for greater comfort and better stability.
• Light and resistant. Maximum reliability.
• Blades made in tungsten carbide.

  Rubi - Joint Scraper Model # 65907
 

• Traditional grout scraper with an ergonomic handle
• Two platelets of electro-deposited tungsten carbide
• Combinable with 1, 2 or 3 plates

  Rubi - Spare Joint Scraper Model # 71974
 

• Rubi replacement blades (ref: 71974)
• for Rubi Joint Scraper Ref 65907
• Each pack contains 2 spare blades

  Rubi - Rubiscraper Blade for Grouts 1.5MM Model # 66810
 

• Blade reafilable and easily interchangeable.
• For the cleaning of the mortar joint of 1.5 mm.
• Available in several sizes to fit various widths of existing board.

  Rubi - Rubiscraper Blade for Grouts 2MM Model # 66811
 

• Re-sharpening and easily interchangeable blade.
• For cleaning mortar joints in 0.079 in
• Available in various sizes to accommodate various existing board widths.

  Rubi - Rubiscraper Blade for Grouts 3MM Model # 66812
 

  Rubi - Shape Template Max depth: 4.5cm Model # 70925
 

• The RUBI shape template is probably one of the most sought tools by professionals, not only by ceramic tile fixers, but people from other branches within the construction industry.
• With the RUBI shape template, the user can easily copy forms in difficult to mark areas and transpose these markings to ceramic tiles for subsequent cutting.
• To copy a shape, you only have to press the template against the element that will serve as a frame and without any further adjustment you will have the exact shape on your shape template.

  Rubi - Hole Marker XL Max length: 65mm Model # 72953
 

• This simple tool copies and transposes, quickly, easily and accurately, the position of holes for pipes, water or light fittings, electrical boxes or any other element that professional tilers come across during tile fixing, from the wall to the ceramics, for its subsequent cutting or drilling.
• For marking the position of holes for tubing and electrical fitting, from the wall to the tile, for subsequent cutting or drilling.
• Length: 17” (45 cm).

  Rubi - Black Rubber Mallet 8.8 oz. (250 gr.) Model # 65904
 

• The flat face mallet is one of the most commonly used tools for the professional installer of ceramic tile
• The main function of the right rubber mallet is to facilitate the establishment and position of the ceramic tile for your installation
• The Rubi are synonymous with warranty for the professional face hammers rubber flat; its design has been developed to reduce the vibrations of the impact, avoiding the from the user

  Rubi - Black Rubber Mallet 17.6 oz. (500 gr.) Model # 65905
 

• Allows hitting at any angle.
• Easy to use.
• Easy to transport

  Rubi - Black Rubber Mallet 26.4 oz. (750 gr.) Model # 65908
 

• Allows hitting at any angle.
• One flat surface and the other spherical
• Rubber mallet – flat

  Rubi - White Rubber Mallet 8.8 oz. (250 gr.) Model # 65912
 

• Flat 2-sided
• Flat sides allow smaller, lighter hammer to be more effective
• Wooden handle has 3 grooves to improve grip

  Rubi - White Rubber Mallet 17.6 oz. (500 gr.) Model # 65913
 

  Rubi - White Rubber Mallet 26.4 oz. (750 gr.) Model # 65914
 

• The main function of the rubber mallet is to facilitate the correct laying and positioning of the ceramic tile during its installation.
• RUBI flat-faced rubber mallets are synonymous with a professional guarantee; its design has been developed to reduce impact vibrations and prevent the user from suffering them.
• Flat Face Mallets are available in three different weights: 8.82 oz, 17.64 oz, 26.46 oz, as well as traditional black rubber or beneficial white rubber.

  Rubi - Folding 4 in 1 Working Table 80x52x12.5cm Model # 66924
 

• 4 uses in 1: Work bench, scaffold, dolly and creeper.
• Foldable, easy to transport and storage.
• Double sided board: MDF wood side (work bench function) and non-slippery PP plastic side (rest of functions). EASY interchangeable.

  Rubi - Smooth Rubinet Sponge SuperPro Model # 20905
 

• Made from flexible polyurethane, polyester base.
• Ideal for general cleaning of all surfaces; Suitable for easy cleaning of ceramic tiles.
• Medium level of absorption.

  Rubi - Tile Spacers 1/32″ (1 mm.) – 300pcs Model # 2911
 

• To space tiles evenly.
• For use with all tile sizes and shapes.
• Other sizes available.

  Rubi - Tile Spacers 1/16″ (1.5 mm.) – 300pcs Model # 2912
 

• Higher rigidity spacer specially designed for use with large format coatings. Quality base material, without impurities or imperfections. Underside designed for good bonding to the bonding material.
• Spacers for large format and rectified ceramics.
• Spacers for rustic and large format tiles.

  Rubi - Tile Spacers 3/32″ (2 mm.) – 300pcs Model # 2901
 

• Quality Rubi Spacers
• Available in handy 300 pc pack
• Great for creating a small grout line

  Rubi - Tile Spacers 1/8″ (3 mm.) – 200pcs Model # 2902
 

• For evenly spacing tiles.
• For use with all tile sizes and shapes.
• Other sizes available in the range.

  Rubi - Tile Spacers 3/16″ (5 mm.) – 100pcs Model # 2903
 

• For floor tiles
• Quality base material, without impurities or imperfections
• Hollow structure with internal reinforcements; supports the tensions and allows to leave into the joint and to grout over

  Rubi - Tile Spacers 1/4″ (6 mm.) – 100pcs Model # 2036
 

• Crosshead for flooring
• Quality base material, without impurities or imperfections
• Hollow structure with internal reinforcements; withstands stresses and allows gripping material to enter

  Rubi - Tile Spacers 5/16″ (8 mm.) 50pcs Model # 2037
 

• Manufacture with high precision and regularity
• Total absence of rough edges.
• Use only Rubi tile spacers and you will obtain the best
  possible finish in all your tiling and flooring jobs.

  Rubi - Tile Spacers 13/32″ (10 mm.) – 50pcs Model # 2905
 

• The primary use for these 10mm junction crosses is for rustic or industrial ceramic tile flooring.
• RUBI 10mm gaskets are made from a high quality base material and are free of imperfections or burrs.
• The internal geometry of the junction crosses is hollow. Thanks to the design with internal reinforcements, they support tension and do not crush.

  Rubi - Delta Level System Plier Fast-Fix Model # 03901
 

• Use with Rubi wedges and straps to eliminate tile lippage
• Use to level floor and wall tile
• Rubi Delta tile leveling system prevents tiles from moving during installation

  Rubi - Delta Level System Wedge – 200pcs Model # 2844
 

• 200 reusable wedges.
• Prevents movement of parts when adhesive is setting and enhances the resulting surface surface.
• Working time is reduced and the profitability of installation work is improved, both on floors and wall tiles

  Rubi - Delta Level System Strip 3-12mm, 0.5mm – 200pcs Model # 3930
 

• For 12″x12″ (30x30cm) formats and more. Always double gluing.
• Ensures the flatness and regularity of the surface
• It avoids the generation of eyebrows during the laying of ceramic tiles, both in pavements and in coatings.

  Rubi - Delta Level System Strip 3-12mm, 1mm – 200pcs Model # 2851
 

• For 12″x12″ (30x30cm) formats and more. Always double gluing.
• Ensures the flatness and regularity of the surface
• It avoids the generation of eyebrows during the laying of ceramic tiles, both in pavements and in coatings

  Rubi - Delta Level System Strip 3-12mm, 1.5mm – 200pcs Model # 2841
 

• For 12″x12″ (30x30cm) formats and more. Always double gluing.
• Ensures the flatness and regularity of the surface
• It avoids the generation of eyebrows during the laying of ceramic tiles, both in pavements and in coatings.

  Rubi - Delta Level System Strip 3-12mm, 1.5mm – 400pcs Model # 2842
 

• For 12″x12″ (30x30cm) formats and more. Always double gluing.
• Ensures the flatness and regularity of the surface
• It avoids the generation of eyebrows during the laying of ceramic tiles, both in pavements and in coatings.

  Rubi - Delta Level System Strip 3-12mm, 2mm – 200pcs Model # 2853
 

• For 12″x12″ (30x30cm) formats and more. Always double gluing.
• Ensures the flatness and regularity of the surface
• It avoids the generation of eyebrows during the laying of ceramic tiles, both in pavements and in coatings.

  Rubi - Delta Level System Strip 6-15mm, 3mm -200pcs Model # 2867
 

• For 12″x12″ (30x30cm) formats and more. Always double gluing.
• Ensures the flatness and regularity of the surface
• It avoids the generation of eyebrows during the laying of ceramic tiles, both in pavements and in coatings.

  Rubi - Delta Level System Strip 11-20mm, 1.5mm – 100pcs Model # 2846
 

• For 12″x12″ (30x30cm) formats and more. Always double gluing.
• Ensures the flatness and regularity of the surface
• It avoids the generation of eyebrows during the laying of ceramic tiles, both in pavements and in coatings.

  Rubi - Delta Level System Strip 11-20mm, 2mm – 100pcs Model # 2858
 

• For 12″x12″ (30x30cm) formats and more. Always double gluing.
• Ensures the flatness and regularity of the surface
• It avoids the generation of eyebrows during the laying of ceramic tiles, both in pavements and in coatings.

  Rubi - TP-75-T Manual Tile Cutter for Ceramic and Porcelain Model # 12957
 

• Single guide system highly resistant to impacts for longer life
• Ergonomic handle with embedded breaker for speed and ease of use
• Swivel square with central pivot for fast and accurate measurement of angular cuts
• Long-lasting laser engraved square

  Rubi - Plus Scoring Wheel 3/4in (18mm) Model # 1992
 

• Is made of sintered tungsten carbide.
• Each wheel is rectified in a unit manner so that each diameter has an incision angle according to its function and use.
• Each diameter of wheel offers different results and yields, depending on the type of ceramic material.

  Rubi - TC-180 230V-50Hz 180mm Electric Circular Saw Kit Model # 50994
 

• This power tool allows the user to reduce the handling of heavy or unwieldy parts. Thus achieving greater efficiency in the work of installing large format pieces.
• The TC-180 circular saw is equipped to work in both wet cutting (hose connection) and dry cutting (vacuum cleaner connection).
• The user can easily adjust the cutting thickness up to 55 mm, and it can be adapted to the nature of the various materials wanted to be cut.

  Rubi - Slim Cutter Plus – Manual Tile Cutter for Large Format Porcelain Tiles, with Carry Bag Model # 18959
 

• 110 cm long extruded aluminium guides which can be connected together
• Breaking system with adjustable soft-grip nippers ensures progressive breaking of the tile without cracking
• Recommended for porcelain tiles with thickness between 3 and 10mm

  Rubi - Rubimix-9 Super Torque 220V; 50/60Hz Electric Mixer Model # 26972
 

• The most notable feature of the RUBIMIX-9 SUPERTORQUE is its great force (40.2 Nm torque). This torque is necessary to be able to mix high viscosity materials without the equipment being unnecessarily over-stressed.
• Its two-speed mechanical gearbox allows us to choose between two RPM ranges; from 0 to 450 and from 0 to 780. Speeds that we can regulate by pressing directly on the trigger, which is also equipped with a soft start system.
• The combination of torque, power and speed make the RUBIMIX-9 SUPERTORQUE a safe bet to obtain perfectly homogeneous mixes in any material. It also includes a safety lock to prevent inadvertent start-up

  Rubi - M-100 3H Hex Rod Mortar Mixer Paddle Model # 76946
 

• The mixer paddle has a hexagonal adaptable finish which can be adapted to all RUBIMIX models by using the chuck accessory (Ref. 71967) or a traditional electric drill.
• The mixer paddles for cementitious mortars have a head designed to perform a movement from the bottom up.
• With mortar mixer paddles, the material rises, at a low speed, up the inside of the paddle head and then come back down the outside.

  Rubi - M-140 R 3H Mortar Mixer Paddle Model # 76919
 

• This range of mortar mixer paddles has a M14 x 2 thread connection which is directly adaptable to all RUBIMIX electric mixers and to most other brands.
• The mixer paddles for cementitious mortars have a head designed to perform a movement from the bottom up.
• The 3H rods have a 3-blade propeller head for a greater mixing efficiency.

  Rubi - M-160 R 3H Mortar Mixer Paddle Model # 76940
 

• This range of mortar mixer paddles has a M14 x 2 thread connection which is directly adaptable to all RUBIMIX electric mixers and to most other brands.
• The mixer paddles for cementitious mortars have a head designed to perform a movement from the bottom up.
• The 3H rods have a 3-blade propeller head for a greater mixing efficiency.

  Rubi - M-160 FI 3H Mortar Mixer Paddle Model # 76944
 

This product has been discontinued by the manufacturer.

• The range of FAST-IN mortar paddles features the unique tool-free quick connection system, FAST-IN from RUBI, and allows the user to change mixer paddles without tools, quickly and easily.
• The mixer paddles for cementitious mortars have a head designed to perform a movement from the bottom up.
• The 3H rods have a 3-blade propeller head for a greater mixing efficiency. The head generates fewer vibrations; therefore, the user will be able to work in greater comfort.

  Rubi - M-140 R 3H ZN Mortar Mixer Paddle Model # 76973
 

• This range of mixing rods for mortars, thanks to the galvanized finish, prevents oxidation of the rod, extending the life of it.
• In addition, by not wearing any physical coating, there is no risk of contaminating the resulting mixture.
• The range has rods with M14 x 2 thread connection, adaptable directly to all RUBIMIX electric mixers and the vast majority of other brands, and rods with hexagonal finish, adaptable to the drill head, in the smallest diameters (100 and 120 mm ).
• The mixing rods for galvanized cement mortars have a head designed to perform a movement from bottom to top.

  Rubi - L-100 Liquid Mixer Paddle 22in Model # 65934
 

• The paddles in this range have a 10mm hexagonal finish, which is adaptable to all RUBIMIX models by using the chuck accessory (Ref. 71967) or a traditional electric drill.
• The liquid mixer paddles have a head design which means that, when in operation, they exert a downward movement on the material to be mixed.
• This downward movement is the most suitable and recommended movement for mixing low-viscosity materials such as paints, insulating material, dispersion adhesives, fibers, plaster, etc.

  Rubi - DS-250-N-1300 220V Electric Tile Cutter Model # 52930
 

• Motor assembly mounted on sliding bearings for maximum precision and reliability
• Aluminium structure for a lightweight machine with maximum resistance to working conditions
• Wheels and handle included for easy transport

  Rubi - DS-250-N-1500 220V Electric Tile Cutter Model # 52940
 

• Motor assembly mounted on sliding bearings for maximum precision and reliability
• Aluminium structure for a lightweight machine with maximum resistance to working conditions
• Wheels and handle included for easy transport

  Rubi - DR-350 220V Electric Tile Cutter Model # 56940
 

• Head with high performance plunge effect for large cutting capacity
• Large table size provides a large work surface
• Robust steel structure for increased resistance to wear

  Rubi - Baseboard Lateral Stop for DV/DC/DS/DX Model # 51910
 

• Designed to facilitate 45° machining of top pieces for skirting boards.
• Millimeter adjustment for guaranteed parallelism of cut
• Fits DV/DC/DS/DX series tile cutters

  Rubi - Rubi Triller 230V 50HZ Electric Tamping System Model # 18948
 

• It is recommended, to a greater extent, in porcelain sheet installation work and above all, in formats greater than 300 cm x 100 cm.
• It can also be used for the installation and correct fixing of uncoupling or waterproofing sheets.
• It is light weight which only weighs 4.8 kg and can facilitates its use on vertical supports and work at height.

  Rubi - 8″ Ceramic Tiles Continuous Rim Diamond Blade, CEV-200 SUPERPRO Model # 30946
 

• 200mm continuous rim diamond blade.
• For cutting general ceramic tiles upto 25mm thick.
• For wet cutting.

  Rubi - 10″ Ceramic Tiles Continuous Rim Diamond Blade, CEV-250 SUPERPRO Model # 30949
 

• 250mm continuous rim diamond blade
• For cutting general ceramic tiles upto 25mm thick
• For wet cutting

  Rubi - 12″ Ceramic Tiles Continuous Rim Diamond Blade, CEV-300 SUPERPRO Model # 30950
 

• Ideal for use with wet saws
• Standard quality diamond
• High quality cut, extreme user safety

  Rubi - 14″ Ceramic Tiles Continuous Rim Diamond Blade, CEV-350 SUPERPRO Model # 30951
 

• Disc for general cutting of ceramic tiles such as tile, glazed stoneware, porcelain stoneware
• The best finish. For cutting and mitering ceramic tile and other stone coating materials with thicknesses < 25 mm
• Great performance

  Rubi - 8″ Hard Material Continuous Rim Diamond Blade, CPA-200 SUPERPRO Model # 30926
 

• Recommended blades to cut hard materials such as granite, rustic tiles, klinker, fire bricks, slate.
• The best finish. To cut and mitre ceramic tiles and other stone coating materials with less than 1″ (25 mm.) thickness.

  Rubi - 10″ Hard Material Continuous Rim Diamond Blade, CPA-250 SUPERPRO Model # 30929
 

• Recommended blades to cut hard materials such as granite, rustic tiles, klinker, fire bricks, slate.
• The best finish. To cut and mitre ceramic tiles and other stone coating materials with less than 1″ (25 mm.) thickness.

  Rubi - 12″ Hard Material Continuous Rim Diamond Blade, CPA-300 SUPERPRO Model # 30930
 

• The RUBI CPA saw blade is specially designed for cutting hard materials such as granite, clinker, slate, etc.
• The CPA saw blade from RUBI is ideal for straight and miter cutting of tiles, composite and other wall covering materials that are extremely hard up to a thickness of 25 mm. The RUBI CPA saw blade combines different metals in the diamond edge together with a very high and fine quality diamond.
• This ensures that we can offer a wet-use saw blade to satisfied customers all over the world

  Rubi - 14″ Hard Material Continuous Rim Diamond Blade, CPA-350 SUPERPRO Model # 30931
 

• The RUBI CPA saw blade is specially designed for cutting hard materials such as granite, clinker, slate, etc.
• The CPA saw blade from RUBI is ideal for straight and miter cutting of tiles, composite and other wall covering materials that are extremely hard up to a thickness of 25 mm. The RUBI CPA saw blade combines different metals in the diamond edge together with a very high and fine quality diamond.
• This ensures that we can offer a wet-use saw blade to satisfied customers all over the world

  Rubi - 8″ Porcelain Tiles Continuous Rim Diamond Blade, CPC-200 PRO Model # 30956
 

• Recommended blade to cut fine porcelain tiles with thicknesses of less than 25 mm.
• Specially recommended for mitre cutting.

  Rubi - 10″ Porcelain Tiles Continuous Rim Diamond Blade, CPC-250 PRO Model # 30959
 

• 250mm continuous rim diamond blade
• For Porcelain tiles up to 25mm
• For wet cutting

  Rubi - 12″ Porcelain Tiles Continuous Rim Diamond Blade, CPC-300 PRO Model # 30960
 

• Currently, one of the biggest problems for the tiler is cutting porcelain tiles.
• At RUBI we know how people work in all countries of the world.
• We know what the tiler requires of his tile installation and repair tools.

  Rubi - 14″ Porcelain Tiles Continuous Rim Diamond Blade, CPC-350 PRO Model # 30961
 

• Specialist diamond blade for fine cutting of porcelain tiles
• Diameter: 230mm. Bore: 22.2mm
• For use with wet tile saws

  Rubi - 8″ Porcelain Tiles J-Slot Diamond Blade, CPX-200 PRO Model # 30964
 

• Measurements : 200 x 25.4 x 1.6 mm
• Max R.P.M 7650 1/min – 80 m/s.

 

  Rubi - 10″ Porcelain Tiles J-Slot Diamond Blade, CPX-250 PRO Model # 30962
 

• Recommended disc to cut fine porcelain tiles.
• High Tech. High speed on straight cuts on porcelain tiles.
• Only for straight cuts, not suitable for mitring.

  Rubi - 12″ Porcelain Tiles J-Slot Diamond Blade, CPX-300 PRO Model # 30963
 

• J-SLOT – CPX wet use saw blade from RUBI is specially designed for porcelain tiles
• The CPX saw blade is particularly recommended for straight cuts in porcelain tiles and especially when a clean finish is desired.
• Due to the thin blade, the CPX saw blade is not suitable for miter cuts

  Rubi - 8″ Hard Material Turbo Viper Diamond Blade, TVH-200 SUPERPRO Model # 31936
 

• TVH-200 Superpro hard materials diamond blade recommended for cutting hard materials such as granite, rustic tiles, clinker, refractory, slate and porcelain tile.
• Market knowledge and hard work allow RUBI to offer the building professional the TURBO VIPER – TVH diamond blade.
• 200m Outer diameter, 25.4mm Inside diameter, 10mm Disc segment height, 1.6mm segment thickness.

  Rubi - 10″ Hard Material Turbo Viper Diamond Blade, TVH-250 SUPERPRO Model # 31937
 

• Recommended blade for cutting hard materials such as granite, rustic tiles, clinker, refractory, slate and porcelain tile.
• The specific design of the diamond band offers greater speed of cutting harder materials without sacrificing finish quality.
• Only for straight cuts, not suitable for mitring.

  Rubi - 12″ Hard Material Turbo Viper Diamond Blade, TVH-300 SUPERPRO Model # 31938
 

• Recommended blade for cutting hard materials such as porcelain tiles, granite, rustic tiles, clinker, refractory and slate.
• The specific design of the diamond band offers greater speed of cutting harder materials without sacrificing finish quality.
• Only for straight cuts, not suitable for mitring.

  Rubi - RUBIFLEX PFP33 Bi-material Handle Brick Trowel 6-3/4in x 2in (170×50 mm) Model # 79050
 

• RUBI also has the exclusive line with RUBIFLEX® bi-material ergonomic handles, a design that provides great shock resistance.
• The elastic coating of RUBIFLEX® handles reduces slippage and provides the maximum grip.
• The plates on RUBI PFP33 brick trowels receive a specific heat treatment that improves their flexibility and reduces wear.
• The fibers of the plate have been oriented lengthwise during rolling.

  Rubi - Delta Level System Kit 1.5mm Model # 3914
 

• Made of steel with ergonomic plastic handles.
• 6 positions height adjustment according to the thickness of the ceramic tile.
• Protective sleeve on the clamp to avoid damaging the tile.
• The kit consists of 1 pliers, 100 strips and 100 reusable wedges.

  Rubi - Delta Level System Kit 2mm Model # 3915
 

• Made of steel with ergonomic plastic handles.
• 6 positions height adjustment according to the thickness of the ceramic tile.
• Protective sleeve on the clamp to avoid damaging the tile.
• The kit consists of 1 pliers, 100 strips and 100 reusable wedges.

  Rubi - Delta Level System Strip 3mm/6-15mm (400-pieces) Model # 2868
 

• For 30 x 30 cm formats and more. Always double gluing.
• Ensures the flatness and regularity of the surface
• It avoids the generation of eyebrows during the laying of ceramic tiles, both in pavements and in coatings.

  Rubi - Vulkolan Grout Spatula 20 in (50 cm) Model # 60971
 

• To fill the joints between tiles.
• Specially for cement based grout mortars.

  Rubi - M-120 DUPLEX Mortar Mixing Paddle 120mm Model # 25946
 

• With these paddles, the user can mix 30 to 50 kg of cementitious mortar or adhesive.
• For viscous and resistant materials such as cementitious adhesives for ceramic tiles, rich in additives such as C2.
• To mix up to 66.1 – 110.2 Lb. (30 – 50 kg) of glue mortar. M27 x 1.5 thread finish.

  Rubi - DCX-250-XPERT-1250 220V Electric Tile Cutter Model # 52960
 

• Reinforced aluminium chassis with innovative triple beam system and steel sides for immproved stability and rigidity
• Reinforced cutting guide for a better finish
• New adjustable cooling system increases cooling efficiency and reduces water dispersion

  Rubi - DCX-250-XPERT-1550 220V Electric Tile Cutter Model # 52970
 

• Reinforced aluminium chassis with innovative triple beam system and steel sides for immproved stability and rigidity
• Reinforced cutting guide for a better finish
• New adjustable cooling system increases cooling efficiency and reduces water dispersion

  Rubi - Flat/Spherical White Rubber Mallet 250G Model # 66905
 

• The spherical side of the RUBI flat/spherical-sided rubber mallet allows you to strike ceramic items at any angle and to have a great control over impact.
• The spherical side also reduces the possibility of moving, involuntarily, the ceramic tile already fitted.
• The main advantage of using the flat-sided rubber mallet with the white rubber head is that there is no risk of leaving traces of rubber on the surfaces of ceramic tiles.

  Rubi - Flat/Spherical White Rubber Mallet 750G Model # 66907
 

• The spherical side of the RUBI flat/spherical-sided rubber mallet allows you to strike ceramic items at any angle and to have a great control over impact.
• The spherical side also reduces the possibility of moving, involuntarily, the ceramic tile already fitted.
• The main advantage of using the flat-sided rubber mallet with the white rubber head is that there is no risk of leaving traces of rubber on the surfaces of ceramic tiles.

  Rubi - TP-75-S Manual Tile Cutter for Ceramic and Porcelain Tiles Model # 12956
 

• Ergonomic handle and incorporated breaker for speed and ease of use.
• Swivel square with central pivot for fast and accurate measurement of angular cuts.
• Long-lasting laser engraved square.
• For intensive cutting of ceramic tile, ideal for Porcelain tiles.

  Rubi - 14″ Hard Material Turbo Viper Diamond Blade, TVH-350 SUPERPRO Model # 31939
 

• The TURBO VIPER – TVH saw blade is recommended for cutting hard materials such as granite, clinker, slate and, of course, porcelain tiles.
• The specific diamond crown design of the TVH saw blade from RUBI offers faster cutting speed in the hardest materials without loss of quality in the finish.
• This special saw blade combines all good things in a TURBO saw blade, resulting in a fine finish.