• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • 1

    Power Tools Accessories

    Shop our selection of Power Tools Accessories from our retail outlets across dubai & UAE - AABTools



    Categories

    DeWALT DT10300-QZ - Extreme Framing Circular Saw Blade 24T (Corded)
      DeWALT - Extreme Framing Circular Saw Blade 24T (Corded) Model # DT10300-QZ

     
    • For use in corded Circular saws
    • Ripping and cross-cutting natural timbers.
    • Cutting composite wood based sheet materials e.g. plywood; mdf and chipboard etc.
    • Not recommended for timbers that may contain nails.
    DeWALT DT10303-QZ - Extreme Framing Circular Saw Blade 40T(Corded)
      DeWALT - Extreme Framing Circular Saw Blade 40T(Corded) Model # DT10303-QZ

     
    • For use in corded Circular saws
    • Ripping and cross-cutting natural timbers.
    • Cutting composite wood based sheet materials e.g. plywood; mdf and chipboard etc.
    • Not recommended for timbers that may contain nails.
    DeWALT DT10304-QZ - Extreme Framing Circular Saw Blade 24T(Corded)
      DeWALT - Extreme Framing Circular Saw Blade 24T(Corded) Model # DT10304-QZ

     
    • For use in corded Circular saws
    • Ripping and cross-cutting natural timbers.
    • Cutting composite wood based sheet materials e.g. plywood; mdf and chipboard etc.
    • Not recommended for timbers that may contain nails.
    DeWALT DT10624-QZ - Extreme Framing Circular Saw Blade 24T (Cordless)
      DeWALT - Extreme Framing Circular Saw Blade 24T (Cordless) Model # DT10624-QZ

     
    • For use in cordless Circular saws
    • Ripping and cross-cutting natural timbers.
    • Cutting composite wood based sheet materials e.g. plywood; mdf and chipboard etc.
    • Not recommended for timbers that may contain nails.
    DeWALT DT10640-QZ - Extreme Framing Circular Saw Blade 40T (Cordless)
      DeWALT - Extreme Framing Circular Saw Blade 40T (Cordless) Model # DT10640-QZ

     
    • For use in cordless Circular saws
    • Ripping and cross-cutting natural timbers.
    • Cutting composite wood based sheet materials e.g. plywood; mdf and chipboard etc.
    • Not recommended for timbers that may contain nails.
    DeWALT DT1152-QZ - Circular Saw Blade 190mm x 30 x 18t
      DeWALT - Circular Saw Blade 190mm x 30 x 18t Model # DT1152-QZ

     

    For use in portable Circular Saws

    DeWALT DT1153-QZ - Construction Circular Saw Blade 190mm x 30 x 40T
      DeWALT - Construction Circular Saw Blade 190mm x 30 x 40T Model # DT1153-QZ

     

    For use in portable Circular Saws

    DeWALT DT1154-QZ - Circular Saw Blade 216mm x 30 x 24t
      DeWALT - Circular Saw Blade 216mm x 30 x 24t Model # DT1154-QZ

     

    For use in Stationary circular saws

    DeWALT DT1159-QZ - Construction Circular Saw Blade 250mm x 30 x 48t
      DeWALT - Construction Circular Saw Blade 250mm x 30 x 48t Model # DT1159-QZ

     

    For use in Stationary circular saws

    DeWALT DT1160-QZ - Construction Circular Saw Blade 305mm x 30 x 24t
      DeWALT - Construction Circular Saw Blade 305mm x 30 x 24t Model # DT1160-QZ

     

    For use in Stationary circular saws

    DeWALT DT1161-QZ - Circular Saw Blade 305mm x 30 x 40t
      DeWALT - Circular Saw Blade 305mm x 30 x 40t Model # DT1161-QZ

     

    For use in Stationary circular saws

    DeWALT DT1162-QZ - Construction Circular Saw Blade 305mm x 30 x 60T
      DeWALT - Construction Circular Saw Blade 305mm x 30 x 60T Model # DT1162-QZ

     

    For use in Stationary circular saws

    DeWALT DT1163-QZ - Table Saw Blade 315mm x 30mm x 24T
      DeWALT - Table Saw Blade 315mm x 30mm x 24T Model # DT1163-QZ

     

    For use in Stationary circular saws

    DeWALT DT1938-QZ - Circular Saw Blade – Dia 190 Bore 16 ATB 20DEG 18T
    DeWALT DT1940-QZ - Circular Saw Blade – Dia 184 Bore 16 ATB 10DEG 30T
    DeWALT DT1941-QZ - Circular Saw Blade – Dia 184 Bore 30 ATB 20DEG 18T
    DeWALT DT1942-QZ - Circular Saw Blade – Dia 184 Bore 30 ATB 10DEG 30T
    DeWALT DT1954-QZ - Circular Saw Blade – Dia:235 Bore 30mm 24T
    DeWALT DT1955-QZ - Circular Saw Blade – Dia 235 Bore 30 ATB 10DEG 40T
    DeWALT DT1959-QZ - Circular Saw Blade – Dia:305 Bore 30mm 48T
    DeWALT DT1960-QZ - Circular Saw Blade – Dia:305 Bore 30mm 60T
    DeWALT DT2049-QZ - 100mm HCS Wood Cutting Jigsaw Blade
      DeWALT - 100mm HCS Wood Cutting Jigsaw Blade Model # DT2049-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2050-QZ - 76mm HCS Wood Cutting Jigsaw Blades
      DeWALT - 76mm HCS Wood Cutting Jigsaw Blades Model # DT2050-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2053-QZ - Jigsaw Blades for Wood HSC T Shank
      DeWALT - Jigsaw Blades for Wood HSC T Shank Model # DT2053-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2054-QZ - Metal Jigsaw Blade PK5 T118EOF
    DeWALT DT2056-QZ - TC Tipped Bi-Metal Jigsaw Blade for Fibreglass
      DeWALT - TC Tipped Bi-Metal Jigsaw Blade for Fibreglass Model # DT2056-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2084-QZ - 180mm Long Life Bi-Metal Jigsaw Blades
      DeWALT - 180mm Long Life Bi-Metal Jigsaw Blades Model # DT2084-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2085-QZ - 132mm HSS Metal Cutting Jigsaw Blades
      DeWALT - 132mm HSS Metal Cutting Jigsaw Blades Model # DT2085-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2101-QZ - Inox TCT Metal Cutting Jigsaw Blade
      DeWALT - Inox TCT Metal Cutting Jigsaw Blade Model # DT2101-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2154-QZ - Metal Jigsaw Blade PK3; 2-6mm; M-Cutting T118BF
    DeWALT DT2160-QZ - Jigsaw Blades for Metal T Shank – HSS
      DeWALT - Jigsaw Blades for Metal T Shank – HSS Model # DT2160-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2161-QZ - HSS T Shank Jigsaw Blades for Metal
    DeWALT DT2162-QZ - HSS T Shank Jigsaw Blades for Metal
    DeWALT DT2163-QZ - HSS T Shank Jigsaw Blades for Metal
      DeWALT - HSS T Shank Jigsaw Blades for Metal Model # DT2163-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2164-QZ - HCS Jigsaw Blades for Wood
      DeWALT - HCS Jigsaw Blades for Wood Model # DT2164-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2165-QZ - HCS T Shank Jigsaw Blades
      DeWALT - HCS T Shank Jigsaw Blades Model # DT2165-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2166-QZ - Jigsaw Blades for Wood T Shank – HCS
    DeWALT DT2167-QZ - HCS Wood Cutting Blade
      DeWALT - HCS Wood Cutting Blade Model # DT2167-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2168-QZ - HCS T Shank Scroller Jigsaw Blades
      DeWALT - HCS T Shank Scroller Jigsaw Blades Model # DT2168-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2169-QZ - Jigsaw Blades for Wood T Shank – HCS
      DeWALT - Jigsaw Blades for Wood T Shank – HCS Model # DT2169-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2185-QZ - HCS Wood Cutting Blade (Pack of 100Pcs)
      DeWALT - HCS Wood Cutting Blade (Pack of 100Pcs) Model # DT2185-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2290-QZ - Wood-Cutting Jigsaw Blades Set 10Pcs
      DeWALT - Wood-Cutting Jigsaw Blades Set 10Pcs Model # DT2290-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2292-QZ - Metal-Cutting Jigsaw Blades Set 10Pcs
      DeWALT - Metal-Cutting Jigsaw Blades Set 10Pcs Model # DT2292-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2294-QZ - Wood/Metal Jigsaw Blade Set 10Pcs
      DeWALT - Wood/Metal Jigsaw Blade Set 10Pcs Model # DT2294-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2348-QZ - Reciprocating Bi Metal Blades 152mm
      DeWALT - Reciprocating Bi Metal Blades 152mm Model # DT2348-QZ

     

    For use with Reciprocating Saws

    DeWALT DT2349-QZ - Reciprocating Bi Metal Blades 228mm
      DeWALT - Reciprocating Bi Metal Blades 228mm Model # DT2349-QZ

     

    For use with Reciprocating Saws

    DeWALT DT2350-QZ - Reciprocating Blades –  Bi Metal 305mm
      DeWALT - Reciprocating Blades – Bi Metal 305mm Model # DT2350-QZ

     

    For use with Reciprocating Saws

    DeWALT DT2353-QZ - Reciprocating Blades – Bi Metal  for Fast Cutting 203mm
    DeWALT DT2354-QZ - Reciprocating Blades – Bi Metal 203mm
      DeWALT - Reciprocating Blades – Bi Metal 203mm Model # DT2354-QZ

     

    For use with Reciprocating Saws

    DeWALT DT2355-QZ - Reciprocating Blades – Bi Metal 305mm
      DeWALT - Reciprocating Blades – Bi Metal 305mm Model # DT2355-QZ

     

    For use with Reciprocating Saws

    DeWALT DT2359-QZ - Reciprocating Blades- Bi Metal  152mm
      DeWALT - Reciprocating Blades- Bi Metal 152mm Model # DT2359-QZ

     

    For use with Reciprocating Saws

    DeWALT DT2361-QZ - Reciprocating Blades – Bi Metal for fast cutting 152mm (Pack of 5Pcs)
    DeWALT DT2384-QZ - Reciprocating Blades – Bi Metal 152mm (Pack of 5Pcs)
    DeWALT DT2385-QZ - Reciprocating Blades – Bi Metal 152mm (Pack of 5Pcs)
      DeWALT - Reciprocating Blades – Bi Metal 152mm (Pack of 5Pcs) Model # DT2385-QZ

     

    For use with Reciprocating Saws

    DeWALT DT2387-QZ - Reciprocating Blades –  Bi Metal 203mm
      DeWALT - Reciprocating Blades – Bi Metal 203mm Model # DT2387-QZ

     

    For use with Reciprocating Saws

    DeWALT DT3452-QZ - Twist knot wire wheel brushes D150
      DeWALT - Twist knot wire wheel brushes D150 Model # DT3452-QZ

     
    • Aggressive twist knot wire wheel and cup brushes are used for heavy duty cleaning work; derusting and deburring
    • Has Highly specified wire grades for optimum material removal
    • Has High wire content for extra brush durability
    DeWALT DT3500-QZ - Twist knot wire cup brushes D65
      DeWALT - Twist knot wire cup brushes D65 Model # DT3500-QZ

     
    • Aggressive twist knot wire wheel and cup brushes are used for heavy duty cleaning work; derusting and deburring
    • Has Highly specified wire grades for optimum material removal
    • Has High wire content for extra brush durability
    DeWALT DT3502-QZ - Twist knot wire wheel brushes  D115
      DeWALT - Twist knot wire wheel brushes D115 Model # DT3502-QZ

     
    • Aggressive twist knot wire wheel and cup brushes are used for heavy duty cleaning work; derusting and deburring
    • Have Highly specified wire grades for optimum material removal
    • High wire content for extra brush durability
    DeWALT DT3600-QZ - Velcro Backing Pad 125mm
      DeWALT - Velcro Backing Pad 125mm Model # DT3600-QZ

     
    • Quick Fit replacement platens for DEWALT Random
    • Orbit Sanders. Hardness grade – medium.
    DeWALT DT3601-QZ - Velcro Backing Pad 150mm
      DeWALT - Velcro Backing Pad 150mm Model # DT3601-QZ

     
    • Quick Fit replacement platens for DEWALT Random
    • Orbit Sanders. Hardness grade – medium.
    DeWALT DT3610-QZ - Backing Pad For Angle Grinder 115mm M14 Bore
      DeWALT - Backing Pad For Angle Grinder 115mm M14 Bore Model # DT3610-QZ

     
    • For use with angle grinder fibre
      discs and polishing bonnets.
    • Thermoplastic backing pad supplied with
      flange locking nut.
    DeWALT DT3611-QZ - Backing Pad For Angle Grinder 125mm M15 Bore
      DeWALT - Backing Pad For Angle Grinder 125mm M15 Bore Model # DT3611-QZ

     
    • For use with angle grinder fibre
      discs and polishing bonnets.
    • Thermoplastic backing pad supplied with
      flange locking nut.
    DeWALT DT3612-QZ - Backing Pad For Angle Grinder 178mm M16 Bore
      DeWALT - Backing Pad For Angle Grinder 178mm M16 Bore Model # DT3612-QZ

     
    • For use with angle grinder fibre
      discs and polishing bonnets.
    • Thermoplastic backing pad supplied with
      flange locking nut.
    DeWALT DT3620-QZ - Angle grinder polishing bonnet; 115mm
      DeWALT - Angle grinder polishing bonnet; 115mm Model # DT3620-QZ

     
    • High Speed polishing on a wide
      variety of surfaces (e.g.) unpainted
      metals and stone.
    • Has Lambswool pile polishing bonnets.
    DeWALT DT3622-QZ - Angle grinder polishing bonnet; 178mm
    DeWALT DT3905-QZ - HSS Reversible planer blades 82mm x 2
      DeWALT - HSS Reversible planer blades 82mm x 2 Model # DT3905-QZ

     

    For use with DW677;DW678K;DW678EK and DW680K

    DeWALT DT3906-QZ - TCT Reversible Planer Blades 82mm x 2
      DeWALT - TCT Reversible Planer Blades 82mm x 2 Model # DT3906-QZ

     

    For use with DW677;DW678K;DW678EK and DW680K

    DeWALT DT4031-QZ - Circular Saw Blade 184mm x 16mm x 28T
      DeWALT - Circular Saw Blade 184mm x 16mm x 28T Model # DT4031-QZ

     

    For use in portable Circular Saws

    DeWALT DT4036-QZ - Circular Saw Blade 235mm x 30mm x 28T
      DeWALT - Circular Saw Blade 235mm x 30mm x 28T Model # DT4036-QZ

     

    For use in portable Circular Saws

    DeWALT DT4063-QZ - Circular Saw Blade 184mm x 16mm x 40T
      DeWALT - Circular Saw Blade 184mm x 16mm x 40T Model # DT4063-QZ

     

    For use in portable Circular Saws

    DeWALT DT4067-QZ - Circular Saw Blade 235mm x 30mm x 40T
      DeWALT - Circular Saw Blade 235mm x 30mm x 40T Model # DT4067-QZ

     

    For use in portable Circular Saws

    DeWALT DT4087-QZ - Extreme Circular Saw Blade 165mm x 20mm x 48T
      DeWALT - Extreme Circular Saw Blade 165mm x 20mm x 48T Model # DT4087-QZ

     

    For use in portable Circular Saws

    DeWALT DT4092-QZ - Circular Saw Blade 184mm x 16mm x 48T
      DeWALT - Circular Saw Blade 184mm x 16mm x 48T Model # DT4092-QZ

     

    For use in portable Circular Saws

    DeWALT DT4097-QZ - Circular Saw Blade 235mm x 30mm x 56T
      DeWALT - Circular Saw Blade 235mm x 30mm x 56T Model # DT4097-QZ

     

    For use in portable Circular Saws

    DeWALT DT4215-QZ - Circular Saw Blade 315mm x 30mm x 24T
      DeWALT - Circular Saw Blade 315mm x 30mm x 24T Model # DT4215-QZ

     

    For use in Stationary circular saws

    DeWALT DT4281-QZ - Extreme Circular Saw Blade 300mm x 30mm x 80T
    DeWALT DT4282-QZ - Extreme Circular Saw Blade 250mm x 30mm x 80T
    DeWALT DT4283-QZ - Extreme Circular Saw Blade 300mm x 30mm x 80T
      DeWALT - Extreme Circular Saw Blade 300mm x 30mm x 80T Model # DT4283-QZ

     

    For use in Stationary circular saws

    DeWALT DT4287-QZ - Extreme Circular Saw Blade 250mm x 30mm x 80T
    DeWALT DT4288-QZ - Extreme Circular Saw Blade 305 x 30 x 80T
      DeWALT - Extreme Circular Saw Blade 305 x 30 x 80T Model # DT4288-QZ

     

    For use in Stationary circular saws

    DeWALT DT4290-QZ - Extreme Circular Saw Blade 305mm x 30mm x 96T
      DeWALT - Extreme Circular Saw Blade 305mm x 30mm x 96T Model # DT4290-QZ

     

    For use in Stationary circular saws

    DeWALT DT4291-QZ - Extreme Circular Saw Blade 350mm x 30mm x 96T
      DeWALT - Extreme Circular Saw Blade 350mm x 30mm x 96T Model # DT4291-QZ

     

    For use in Stationary circular saws

    DeWALT DT4327-QZ - Extreme Circular Saw Blade 300 x 30 x 48t
      DeWALT - Extreme Circular Saw Blade 300 x 30 x 48t Model # DT4327-QZ

     

    For use in Stationary circular saws

    DeWALT DT4328-QZ - Extreme Circular Saw Blade 300 x 30 x 60t
      DeWALT - Extreme Circular Saw Blade 300 x 30 x 60t Model # DT4328-QZ

     

    For use in Stationary circular saws

    DeWALT DT4331-QZ - Extreme Circular Saw Blade 305 x 30 x 60t
      DeWALT - Extreme Circular Saw Blade 305 x 30 x 60t Model # DT4331-QZ

     

    For use in Stationary circular saws

    DeWALT DT4332-QZ - Circular Saw Blade 315mm x 30mm x 48T
      DeWALT - Circular Saw Blade 315mm x 30mm x 48T Model # DT4332-QZ

     

    For use in Stationary circular saws

    DeWALT DT4333-QZ - Circular Saw Blade 350mm x 30mm x 42T
      DeWALT - Circular Saw Blade 350mm x 30mm x 42T Model # DT4333-QZ

     

    For use in Stationary circular saws

    DeWALT DT4334-QZ - Circular Saw Blade 350mm x 30mm x 54T
      DeWALT - Circular Saw Blade 350mm x 30mm x 54T Model # DT4334-QZ

     

    For use in Stationary circular saws

    DeWALT DT4338-QZ - Circular Saw Blade 400mm x 30mm x 60T
      DeWALT - Circular Saw Blade 400mm x 30mm x 60T Model # DT4338-QZ

     

    For use in Stationary circular saws

    DeWALT DT4353-QZ - Extreme Circular Saw Blade 250mm x 30mm x 80T
      DeWALT - Extreme Circular Saw Blade 250mm x 30mm x 80T Model # DT4353-QZ

     

    For use in Stationary circular saws

    DeWALT DT4358-QZ - Circular Saw Blade 315mm x 30mm x 72T
      DeWALT - Circular Saw Blade 315mm x 30mm x 72T Model # DT4358-QZ

     

    For use in Stationary circular saws

    DeWALT DT4360-QZ - Circular Saw Blade 350mm x 30mm x 84T
      DeWALT - Circular Saw Blade 350mm x 30mm x 84T Model # DT4360-QZ

     

    For use in Stationary circular saws

    DeWALT DT4600-QZ - Wood Auger Drill Bit; 6mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 6mm X 200mm X 100mm Model # DT4600-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4602-QZ - Wood Auger Drill Bit; 8mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 8mm X 200mm X 100mm Model # DT4602-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4604-QZ - Wood Auger Drill Bit; 10mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 10mm X 200mm X 100mm Model # DT4604-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4606-QZ - Wood Auger Drill Bit; 12mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 12mm X 200mm X 100mm Model # DT4606-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4608-QZ - Wood Auger Drill Bit; 14mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 14mm X 200mm X 100mm Model # DT4608-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4610-QZ - Wood Auger Drill Bit; 16mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 16mm X 200mm X 100mm Model # DT4610-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4612-QZ - Wood Auger Drill Bit; 18mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 18mm X 200mm X 100mm Model # DT4612-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4615-QZ - Wood Auger Drill Bit; 22mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 22mm X 200mm X 100mm Model # DT4615-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4616-QZ - Wood Auger Drill Bit; 24mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 24mm X 200mm X 100mm Model # DT4616-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4618-QZ - Wood Auger Drill Bit; 26mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 26mm X 200mm X 100mm Model # DT4618-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4619-QZ - Wood Auger Drill Bit; 28mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 28mm X 200mm X 100mm Model # DT4619-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4620-QZ - Wood Auger Drill Bit; 30mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 30mm X 200mm X 100mm Model # DT4620-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4621-QZ - Wood Auger Drill Bit; 32mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 32mm X 200mm X 100mm Model # DT4621-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4632-QZ - Wood Auger Drill Bit; 8mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 8mm X 380mm X 280mm Model # DT4632-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4636-QZ - Wood Auger Drill Bit; 12mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 12mm X 380mm X 280mm Model # DT4636-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4638-QZ - Wood Auger Drill Bit; 14mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 14mm X 380mm X 280mm Model # DT4638-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4640-QZ - Wood Auger Drill Bit; 16mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 16mm X 380mm X 280mm Model # DT4640-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4642-QZ - Wood Auger Drill Bit; 18mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 18mm X 380mm X 280mm Model # DT4642-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4644-QZ - Wood Auger Drill Bit; 20mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 20mm X 380mm X 280mm Model # DT4644-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4645-QZ - Wood Auger Drill Bit; 22mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 22mm X 380mm X 280mm Model # DT4645-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4646-QZ - Wood Auger Drill Bit; 24mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 24mm X 380mm X 280mm Model # DT4646-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4648-QZ - Wood Auger Drill Bit; 26mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 26mm X 380mm X 280mm Model # DT4648-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4649-QZ - Wood Auger Drill Bit; 28mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 28mm X 380mm X 280mm Model # DT4649-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4650-QZ - Wood Auger Drill Bit; 30mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 30mm X 380mm X 280mm Model # DT4650-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4651-QZ - Wood Auger Drill Bit; 32mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 32mm X 380mm X 280mm Model # DT4651-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4950-QZ - Mixer Tools; 100mm X 600mm
      DeWALT - Mixer Tools; 100mm X 600mm Model # DT4950-QZ

     

    For wallpaper paste; gloss paint; emulsion; mortar and plaster.

    DeWALT DT4951-QZ - Mixer Tools; 120mm X 600mm
      DeWALT - Mixer Tools; 120mm X 600mm Model # DT4951-QZ

     

    For wallpaper paste; gloss paint; emulsion; mortar and plaster.

    DeWALT DT50465-XJ - HSS-G Drill Bit 1.0mm
      DeWALT - HSS-G Drill Bit 1.0mm Model # DT50465-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50466-XJ - HSS-G Drill Bit 1.5mm
      DeWALT - HSS-G Drill Bit 1.5mm Model # DT50466-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50468-XJ - HSS-G Drill Bit 2.0mm
      DeWALT - HSS-G Drill Bit 2.0mm Model # DT50468-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50469-XJ - HSS-G Drill Bit 2.5mm
      DeWALT - HSS-G Drill Bit 2.5mm Model # DT50469-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50470-XJ - HSS-G Drill Bit 3.0mm
      DeWALT - HSS-G Drill Bit 3.0mm Model # DT50470-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50472-XJ - HSS-G Drill Bit 3.5mm
      DeWALT - HSS-G Drill Bit 3.5mm Model # DT50472-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50473-XJ - HSS-G Drill Bit 4.0mm
      DeWALT - HSS-G Drill Bit 4.0mm Model # DT50473-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50474-XJ - HSS-G Drill Bit 4.5mm
      DeWALT - HSS-G Drill Bit 4.5mm Model # DT50474-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50476-XJ - HSS-G Drill Bit 5.0mm
      DeWALT - HSS-G Drill Bit 5.0mm Model # DT50476-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50477-XJ - HSS-G Drill Bit 5.5mm
      DeWALT - HSS-G Drill Bit 5.5mm Model # DT50477-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50478-XJ - HSS-G Drill Bit 6.0mm
      DeWALT - HSS-G Drill Bit 6.0mm Model # DT50478-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50480-XJ - HSS-G Drill Bit 6.5mm
      DeWALT - HSS-G Drill Bit 6.5mm Model # DT50480-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50481-XJ - HSS-G Drill Bit 7.0mm
      DeWALT - HSS-G Drill Bit 7.0mm Model # DT50481-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50484-XJ - HSS-G Drill Bit 8.0mm
      DeWALT - HSS-G Drill Bit 8.0mm Model # DT50484-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50486-XJ - HSS-G Drill Bit 9.0mm
      DeWALT - HSS-G Drill Bit 9.0mm Model # DT50486-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50488-XJ - HSS-G Drill Bit 10.0mm
      DeWALT - HSS-G Drill Bit 10.0mm Model # DT50488-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50490-XJ - HSS-G Drill Bit 11.0mm
      DeWALT - HSS-G Drill Bit 11.0mm Model # DT50490-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50492-XJ - HSS-G Drill Bit 12.0mm
      DeWALT - HSS-G Drill Bit 12.0mm Model # DT50492-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50494-XJ - HSS-G Drill Bit 13.0mm
      DeWALT - HSS-G Drill Bit 13.0mm Model # DT50494-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50495-XJ - HSS-G Drill Bit 14.0mm
      DeWALT - HSS-G Drill Bit 14.0mm Model # DT50495-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50496-XJ - HSS-G Drill Bit 15.0mm
      DeWALT - HSS-G Drill Bit 15.0mm Model # DT50496-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50497-XJ - HSS-G Drill Bit 16.0mm
      DeWALT - HSS-G Drill Bit 16.0mm Model # DT50497-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50498-XJ - HSS-G Drill Bit 18.0mm
      DeWALT - HSS-G Drill Bit 18.0mm Model # DT50498-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50499-XJ - HSS-G Drill Bit 20.0mm
      DeWALT - HSS-G Drill Bit 20.0mm Model # DT50499-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT5911-QZ - Pack of 10 HSS Jobber Drills in plastic cassette
      DeWALT - Pack of 10 HSS Jobber Drills in plastic cassette Model # DT5911-QZ

     
    • Cylindrical ground right hand cutting helix & 118° point angle. 
    • Diameter tolerance to h8 – Sizes: 1, 2, 3, 4, 5, 6, 7, 8, 9 & 10mm. 
    • Finish – steam tempered black.
    DeWALT DT5912-QZ - Pack of 13 HSS Jobber Drills in plastic cassette
      DeWALT - Pack of 13 HSS Jobber Drills in plastic cassette Model # DT5912-QZ

     
    • Drill Size: 1 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 5(x2), 5.5, 6, 6.5mm
    • Diameter tolerance to h8
    DeWALT DT5913-QZ - Pack of 19 HSS Jobber Drills in metal cassette
      DeWALT - Pack of 19 HSS Jobber Drills in metal cassette Model # DT5913-QZ

     
    • Drill sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 and 10mm.
    • Diameter tolerance to h8
    DeWALT DT5921-QZ - Metal Drill Bit Set 10 Piece
      DeWALT - Metal Drill Bit Set 10 Piece Model # DT5921-QZ

     
    • Diameter: 1; 2; 3; 4; 5; 6; 7; 8; 9; 10 mm
    • Diameter tolerance to h8
    DeWALT DT5923-QZ - Extreme Metal Drill Bit Set 19 Piece
      DeWALT - Extreme Metal Drill Bit Set 19 Piece Model # DT5923-QZ

     
    • Diameters: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 and 10mm
    • Pack Qty: 19
    DeWALT DT5929-QZ - 29 piece HSS Bit Set 1-13mm
      DeWALT - 29 piece HSS Bit Set 1-13mm Model # DT5929-QZ

     
    • Diameters: 1, 1.5, 2, 2.5, 3, 3.2, 3.3, 3.5, 4, 4.2, 4.5, 4.8, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5 and 13mm
    DeWALT DT60200-XJ - SDS-Max Drill Bit  16mm X 340mm X 200mm
      DeWALT - SDS-Max Drill Bit 16mm X 340mm X 200mm Model # DT60200-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60201-XJ - SDS-Max Drill Bit  16mm X 540mm X 400mm
      DeWALT - SDS-Max Drill Bit 16mm X 540mm X 400mm Model # DT60201-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60202-XJ - SDS-Max Drill Bit  18mm X 340mm X 200mm
      DeWALT - SDS-Max Drill Bit 18mm X 340mm X 200mm Model # DT60202-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60203-XJ - SDS-Max Drill Bit  18mm X 540mm X 400mm
      DeWALT - SDS-Max Drill Bit 18mm X 540mm X 400mm Model # DT60203-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60204-XJ - SDS-Max Drill Bit  20mm X 340mm X 200mm
      DeWALT - SDS-Max Drill Bit 20mm X 340mm X 200mm Model # DT60204-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60205-XJ - SDS-Max Drill Bit  20mm X 540mm X 400mm
      DeWALT - SDS-Max Drill Bit 20mm X 540mm X 400mm Model # DT60205-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60206-XJ - SDS-Max Drill Bit  22mm X 340mm X 200mm
      DeWALT - SDS-Max Drill Bit 22mm X 340mm X 200mm Model # DT60206-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60207-XJ - SDS-Max Drill Bit  22mm X 540mm X 400mm
      DeWALT - SDS-Max Drill Bit 22mm X 540mm X 400mm Model # DT60207-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60208-XJ - SDS-Max Drill Bit  24mm X 340mm X 200mm
      DeWALT - SDS-Max Drill Bit 24mm X 340mm X 200mm Model # DT60208-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60209-XJ - SDS-Max Drill Bit  24mm X 540mm X 400mm
      DeWALT - SDS-Max Drill Bit 24mm X 540mm X 400mm Model # DT60209-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60210-XJ - SDS-Max Drill Bit  25mm X 340mm X 200mm
      DeWALT - SDS-Max Drill Bit 25mm X 340mm X 200mm Model # DT60210-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60211-XJ - SDS-Max Drill Bit  25mm X 540mm X 400mm
      DeWALT - SDS-Max Drill Bit 25mm X 540mm X 400mm Model # DT60211-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60212-XJ - SDS-Max Drill Bit  26mm X 340mm X 200mm
      DeWALT - SDS-Max Drill Bit 26mm X 340mm X 200mm Model # DT60212-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60213-XJ - SDS-Max Drill Bit  26mm X 540mm X 400mm
      DeWALT - SDS-Max Drill Bit 26mm X 540mm X 400mm Model # DT60213-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60214-XJ - SDS-Max Drill Bit  28mm X 380mm X 250mm
      DeWALT - SDS-Max Drill Bit 28mm X 380mm X 250mm Model # DT60214-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60215-XJ - SDS-Max Drill Bit  28mm X 570mm X 450mm
      DeWALT - SDS-Max Drill Bit 28mm X 570mm X 450mm Model # DT60215-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60216-XJ - SDS-Max Drill Bit  28mm X 670mm X 550mm
      DeWALT - SDS-Max Drill Bit 28mm X 670mm X 550mm Model # DT60216-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60217-XJ - SDS-Max Drill Bit  30mm X 380mm X 250mm
      DeWALT - SDS-Max Drill Bit 30mm X 380mm X 250mm Model # DT60217-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60218-XJ - SDS-Max Drill Bit  30mm X 570mm X 450mm
      DeWALT - SDS-Max Drill Bit 30mm X 570mm X 450mm Model # DT60218-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60219-XJ - SDS-Max Drill Bit  32mm X 380mm X 250mm
      DeWALT - SDS-Max Drill Bit 32mm X 380mm X 250mm Model # DT60219-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60220-XJ - SDS-Max Drill Bit  32mm X 570mm X 450mm
      DeWALT - SDS-Max Drill Bit 32mm X 570mm X 450mm Model # DT60220-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60800-QZ - 12mm x 340mm x 200mm SDS max XLR
      DeWALT - 12mm x 340mm x 200mm SDS max XLR Model # DT60800-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60801-QZ - 12mm x 540mm x 400mm SDS max XLR
      DeWALT - 12mm x 540mm x 400mm SDS max XLR Model # DT60801-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60802-QZ - 12mm x 670mm x 550mm SDS max XLR
      DeWALT - 12mm x 670mm x 550mm SDS max XLR Model # DT60802-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60803-QZ - 13mm x 340mm x 200mm SDS max XLR
      DeWALT - 13mm x 340mm x 200mm SDS max XLR Model # DT60803-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60804-QZ - 13mm x 540mm x 400mm SDS max XLR
      DeWALT - 13mm x 540mm x 400mm SDS max XLR Model # DT60804-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60805-QZ - 14mm x 340mm x 200mm SDS max XLR
      DeWALT - 14mm x 340mm x 200mm SDS max XLR Model # DT60805-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60806-QZ - 14mm x 540mm x 400mm SDS max XLR
      DeWALT - 14mm x 540mm x 400mm SDS max XLR Model # DT60806-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60807-QZ - 15mm x 340mm x 200mm SDS max XLR
      DeWALT - 15mm x 340mm x 200mm SDS max XLR Model # DT60807-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60808-QZ - 15mm x 540mm x 400mm SDS max XLR
      DeWALT - 15mm x 540mm x 400mm SDS max XLR Model # DT60808-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60809-QZ - 16mm x 340mm x 200mm SDS max XLR
      DeWALT - 16mm x 340mm x 200mm SDS max XLR Model # DT60809-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60810-QZ - 16mm x 540mm x 400mm SDS max XLR
      DeWALT - 16mm x 540mm x 400mm SDS max XLR Model # DT60810-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60811-QZ - 18mm x 340mm x 200mm SDS max XLR
      DeWALT - 18mm x 340mm x 200mm SDS max XLR Model # DT60811-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60812-QZ - 18mm x 540mm x 400mm SDS max XLR
      DeWALT - 18mm x 540mm x 400mm SDS max XLR Model # DT60812-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60813-QZ - 19mm x 340mm x 200mm SDS max XLR
      DeWALT - 19mm x 340mm x 200mm SDS max XLR Model # DT60813-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60814-QZ - 19mm x 540mm x 400mm SDS max XLR
      DeWALT - 19mm x 540mm x 400mm SDS max XLR Model # DT60814-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60815-QZ - 19mm x 670mm x 550mm SDS max XLR
      DeWALT - 19mm x 670mm x 550mm SDS max XLR Model # DT60815-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60816-QZ - 20mm x 340mm x 200mm SDS max XLR
      DeWALT - 20mm x 340mm x 200mm SDS max XLR Model # DT60816-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60817-QZ - 20mm x 540mm x 400mm SDS max XLR
      DeWALT - 20mm x 540mm x 400mm SDS max XLR Model # DT60817-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60818-QZ - 20mm x 920mm x 800mm SDS max XLR
      DeWALT - 20mm x 920mm x 800mm SDS max XLR Model # DT60818-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60819-QZ - 22mm x 340mm x 200mm SDS max XLR
      DeWALT - 22mm x 340mm x 200mm SDS max XLR Model # DT60819-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60820-QZ - 22mm x 540mm x 400mm SDS max XLR
      DeWALT - 22mm x 540mm x 400mm SDS max XLR Model # DT60820-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60821-QZ - 22mm x 920mm x 800mm SDS max XLR
      DeWALT - 22mm x 920mm x 800mm SDS max XLR Model # DT60821-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60822-QZ - 24mm x 340mm x 200mm SDS max XLR
      DeWALT - 24mm x 340mm x 200mm SDS max XLR Model # DT60822-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60823-QZ - 24mm x 540mm x 400mm SDS max XLR
      DeWALT - 24mm x 540mm x 400mm SDS max XLR Model # DT60823-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60824-QZ - 25mm x 340mm x 200mm SDS max XLR
      DeWALT - 25mm x 340mm x 200mm SDS max XLR Model # DT60824-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60825-QZ - 25mm x 540mm x 400mm SDS max XLR
      DeWALT - 25mm x 540mm x 400mm SDS max XLR Model # DT60825-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60826-QZ - 25mm x 920mm x 800mm SDS max XLR
      DeWALT - 25mm x 920mm x 800mm SDS max XLR Model # DT60826-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60827-QZ - 26mm x 340mm x 200mm SDS max XLR
      DeWALT - 26mm x 340mm x 200mm SDS max XLR Model # DT60827-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60828-QZ - 26mm x 540mm x 400mm SDS max XLR
      DeWALT - 26mm x 540mm x 400mm SDS max XLR Model # DT60828-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60829-QZ - 28mm x 380mm x 250mm SDS max XLR
      DeWALT - 28mm x 380mm x 250mm SDS max XLR Model # DT60829-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60830-QZ - 28mm x 570mm x 450mm SDS max XLR
      DeWALT - 28mm x 570mm x 450mm SDS max XLR Model # DT60830-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60831-QZ - 28mm x 670mm x 550mm SDS max XLR
      DeWALT - 28mm x 670mm x 550mm SDS max XLR Model # DT60831-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60832-QZ - 30mm x 380mm x 250mm SDS max XLR
      DeWALT - 30mm x 380mm x 250mm SDS max XLR Model # DT60832-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60833-QZ - 30mm x 570mm x 450mm SDS max XLR
      DeWALT - 30mm x 570mm x 450mm SDS max XLR Model # DT60833-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60834-QZ - 32mm x 380mm x 250mm SDS max XLR
      DeWALT - 32mm x 380mm x 250mm SDS max XLR Model # DT60834-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60835-QZ - 32mm x 570mm x 450mm SDS max XLR
      DeWALT - 32mm x 570mm x 450mm SDS max XLR Model # DT60835-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60836-QZ - 32mm x 920mm x 800mm SDS max XLR
      DeWALT - 32mm x 920mm x 800mm SDS max XLR Model # DT60836-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60837-QZ - 35mm x 380mm x 250mm SDS max XLR
      DeWALT - 35mm x 380mm x 250mm SDS max XLR Model # DT60837-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60838-QZ - 35mm x 570mm x 450mm SDS max XLR
      DeWALT - 35mm x 570mm x 450mm SDS max XLR Model # DT60838-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60839-QZ - 35mm x 670mm x 550mm SDS max XLR
      DeWALT - 35mm x 670mm x 550mm SDS max XLR Model # DT60839-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60840-QZ - 36mm x 570mm x 450mm SDS max XLR
      DeWALT - 36mm x 570mm x 450mm SDS max XLR Model # DT60840-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60841-QZ - 38mm x 380mm x 250mm SDS max XLR
      DeWALT - 38mm x 380mm x 250mm SDS max XLR Model # DT60841-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60842-QZ - 38mm x 570mm x 450mm SDS max XLR
      DeWALT - 38mm x 570mm x 450mm SDS max XLR Model # DT60842-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60843-QZ - 38mm x 670mm x 550mm SDS max XLR
      DeWALT - 38mm x 670mm x 550mm SDS max XLR Model # DT60843-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60844-QZ - 40mm x 380mm x 250mm SDS max XLR
      DeWALT - 40mm x 380mm x 250mm SDS max XLR Model # DT60844-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60845-QZ - 40mm x 570mm x 450mm SDS max XLR
      DeWALT - 40mm x 570mm x 450mm SDS max XLR Model # DT60845-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60846-QZ - 40mm x 920mm x 800mm SDS max XLR
      DeWALT - 40mm x 920mm x 800mm SDS max XLR Model # DT60846-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60847-QZ - 42mm x 570mm x 450mm SDS max XLR
      DeWALT - 42mm x 570mm x 450mm SDS max XLR Model # DT60847-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT6801-QZ - SDS-Plus Pointed Chisel 250mm Length
      DeWALT - SDS-Plus Pointed Chisel 250mm Length Model # DT6801-QZ

     

    For light chipping and chiselling of tile; mortar; glazing compounds and other masonry products with hammers with a rotation stop feature.

    DeWALT DT6802-QZ - SDS-Plus Flat Chisel 250mm X 20mm
      DeWALT - SDS-Plus Flat Chisel 250mm X 20mm Model # DT6802-QZ

     

    For light chipping and chiselling of tile; mortar; glazing compounds and other masonry products with hammers with a rotation stop feature.

    DeWALT DT6803-QZ - SDS-Plus Flat Chisel  200mm X 40mm
      DeWALT - SDS-Plus Flat Chisel 200mm X 40mm Model # DT6803-QZ

     

    For light chipping and chiselling of tile; mortar; glazing compounds and other masonry products with hammers with a rotation stop feature.

    DeWALT DT6811-QZ - XLR Self-Sharpening Chisels; SDS Max Flat Chisel 300 x 25mm
      DeWALT - XLR Self-Sharpening Chisels; SDS Max Flat Chisel 300 x 25mm Model # DT6811-QZ

     

    Increased durability; improved chisel life and chiselling speed through a new steel design combining a wear resistant "Stay Sharp" tip and high durability shock resistant body.

    DeWALT DT6812-QZ - XLR Self-Sharpening Chisels; SDS Max Flat Chisel 400 x 25mm
      DeWALT - XLR Self-Sharpening Chisels; SDS Max Flat Chisel 400 x 25mm Model # DT6812-QZ

     

    Increased durability; improved chisel life and chiselling speed through a new steel design combining a wear resistant "Stay Sharp" tip and high durability shock resistant body.

    DeWALT DT6818-QZ - XLR Self-Sharpening Chisels; SDS Max Flat Chisel 400 x 50mm
      DeWALT - XLR Self-Sharpening Chisels; SDS Max Flat Chisel 400 x 50mm Model # DT6818-QZ

     

    Increased durability; improved chisel life and chiselling speed through a new steel design combining a wear resistant "Stay Sharp" tip and high durability shock resistant body.

    DeWALT DT6820-QZ - SDS-Max Pointed Chisel 300mm
      DeWALT - SDS-Max Pointed Chisel 300mm Model # DT6820-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6821-QZ - SDS-Max Pointed Chisel 400mm
      DeWALT - SDS-Max Pointed Chisel 400mm Model # DT6821-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6822-QZ - SDS-Max Flat Chisel 300mm X 25mm
      DeWALT - SDS-Max Flat Chisel 300mm X 25mm Model # DT6822-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6823-QZ - SDS-Max Flat Chisel 400mm X 25mm
      DeWALT - SDS-Max Flat Chisel 400mm X 25mm Model # DT6823-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6824-QZ - SDS-Max Flat Chisel 360mm X 50mm
      DeWALT - SDS-Max Flat Chisel 360mm X 50mm Model # DT6824-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6825-QZ - SDS-Max Flat Chisel 300mm X 80mm
      DeWALT - SDS-Max Flat Chisel 300mm X 80mm Model # DT6825-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6830-QZ - SDS Max to SDS Plus Adaptor
    DeWALT DT6838-QZ - SDS-Max Bush Hammer 240mm X 45mm
      DeWALT - SDS-Max Bush Hammer 240mm X 45mm Model # DT6838-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6888-QZ - XLR Self-Sharpening Chisels; SDS Max Pointed Chisel 300mm
      DeWALT - XLR Self-Sharpening Chisels; SDS Max Pointed Chisel 300mm Model # DT6888-QZ

     

    Increased durability; improved chisel life and chiselling speed through a new steel design combining a wear resistant "Stay Sharp" tip and high durability shock resistant body.

    DeWALT DT6889-QZ - XLR Self-Sharpening Chisels; SDS Max Pointed Chisel 400mm
      DeWALT - XLR Self-Sharpening Chisels; SDS Max Pointed Chisel 400mm Model # DT6889-QZ

     

    Increased durability; improved chisel life and chiselling speed through a new steel design combining a wear resistant "Stay Sharp" tip and high durability shock resistant body.

    DeWALT DT6927-QZ - 28mm HEX Bull Point Chisel
      DeWALT - 28mm HEX Bull Point Chisel Model # DT6927-QZ

     

    Heavy duty breaking of concrete; ashphalt & stone.Heavy duty tamping tasks and earth rod driving.

    DeWALT DT6929-QZ - 28mm HEX Cold Chisel
      DeWALT - 28mm HEX Cold Chisel Model # DT6929-QZ

     

    Heavy duty breaking of concrete; ashphalt & stone.Heavy duty tamping tasks and earth rod driving.

    DeWALT DT6933-QZ - 28mm HEX Ground Rod Driver
      DeWALT - 28mm HEX Ground Rod Driver Model # DT6933-QZ

     

    Heavy duty breaking of concrete; ashphalt & stone.Heavy duty tamping tasks and earth rod driving.

    DeWALT DT6940-QZ - 19mm HEX Pointed Chisel 400mm Length
      DeWALT - 19mm HEX Pointed Chisel 400mm Length Model # DT6940-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6941-QZ - 19mm HEX Pointed Chisel 600mm Length
      DeWALT - 19mm HEX Pointed Chisel 600mm Length Model # DT6941-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6942-QZ - 19mm HEX Flat Chisel 400mm x 25mm
      DeWALT - 19mm HEX Flat Chisel 400mm x 25mm Model # DT6942-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6943-QZ - 19mm HEX Flat Chisel 600mm x 25mm
      DeWALT - 19mm HEX Flat Chisel 600mm x 25mm Model # DT6943-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6946-QZ - 19mm HEX Flat Wide Chisel 350mm x 140mm
      DeWALT - 19mm HEX Flat Wide Chisel 350mm x 140mm Model # DT6946-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6948-QZ - 19mm HEX Asphalt Cutter 400mm X 90mm
      DeWALT - 19mm HEX Asphalt Cutter 400mm X 90mm Model # DT6948-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6952-QZ - Masonry Drill Bit set 5Pcs
      DeWALT - Masonry Drill Bit set 5Pcs Model # DT6952-QZ

     

    Rotary/percussion masonry drill bit 130ø Douglas form carbide tip.

    DeWALT DT6953-QZ - XLR Self-Sharpening Chisels; 19mm Hex Pointed Chisel 400mm
      DeWALT - XLR Self-Sharpening Chisels; 19mm Hex Pointed Chisel 400mm Model # DT6953-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6956-QZ - Masonry Drill bit Set in plastic Cassette 5Pcs
      DeWALT - Masonry Drill bit Set in plastic Cassette 5Pcs Model # DT6956-QZ

     
    • Unique carbide grade for long life and greater durability
    • Innovative tip design provides an efficient drilling action and reduce walking for greater accuracy
    • Milled flute for fast drilling and special copper brazing to withstand high temperatures
    DeWALT DT6958-QZ - XLR Self-Sharpening Chisels; 19mm Hex Flat Chisel 400 x 25mm
      DeWALT - XLR Self-Sharpening Chisels; 19mm Hex Flat Chisel 400 x 25mm Model # DT6958-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6978-QZ - XLR Self-Sharpening Chisels; SDS+ Pointed Chisel 300mm
      DeWALT - XLR Self-Sharpening Chisels; SDS+ Pointed Chisel 300mm Model # DT6978-QZ

     

    For light chipping and chiselling of tile; mortar; glazing compounds and other masonry products with hammers with a rotation stop feature.

    DeWALT DT6979-QZ - XLR Self-Sharpening Chisels; SDS+ Flat Chisel 200 x 25mm
      DeWALT - XLR Self-Sharpening Chisels; SDS+ Flat Chisel 200 x 25mm Model # DT6979-QZ

     

    For light chipping and chiselling of tile; mortar; glazing compounds and other masonry products with hammers with a rotation stop feature.

    DeWALT DT6984-QZ - XLR Self-Sharpening Chisels; SDS+ Flat Chisel 200 x 40mm
      DeWALT - XLR Self-Sharpening Chisels; SDS+ Flat Chisel 200 x 40mm Model # DT6984-QZ

     

    For light chipping and chiselling of tile; mortar; glazing compounds and other masonry products with hammers with a rotation stop feature.

    DeWALT DT7002-QZ - Chuck 1/2in X 20 UNF –  Cap 13mm
    DeWALT DT7011-QZ - Keyed Chuck 10mm
      DeWALT - Keyed Chuck 10mm Model # DT7011-QZ

     
    • Professional heavy duty chucks & keys.
    • For use with DEWALT and other makes of drills.
    DeWALT DT7012-QZ - Keyed Chuck 13mm
      DeWALT - Keyed Chuck 13mm Model # DT7012-QZ

     
    • Professional heavy duty chucks & keys.
    • For use with DEWALT and other makes of drills.
    DeWALT DT7021-QZ - Drill Chuck Key –  Fits 10mm and 13mm chucks (S2)
      DeWALT - Drill Chuck Key – Fits 10mm and 13mm chucks (S2) Model # DT7021-QZ

     
    • Professional heavy duty chucks & keys.
    • For use with DEWALT and other makes of drills.
    DeWALT DT7030-QZ - SDS Plus 1/2in x 20 UNF (Chuck Adaptor)
    DeWALT DT71563-QZ - 100pc Comb.Drill Bit set 13 Wood Bits / 12Metal Drill
    DeWALT DT7226-QZ - Torsion Screwdriver Bits PZ2 x 50mm
      DeWALT - Torsion Screwdriver Bits PZ2 x 50mm Model # DT7226-QZ

     
    • For use with cordless or corded drills/screwdriver
    • For all screwdriving applications
    • For installation and Facade
    DeWALT DT7231-QZ - Torsion Screwdriver Bits PH1 x 25mm
      DeWALT - Torsion Screwdriver Bits PH1 x 25mm Model # DT7231-QZ

     
    • For use with cordless or corded drills/screwdriver
    • For all screwdriving applications
    • For installation and Facade
    DeWALT DT7232-QZ - Torsion Screwdriver Bits PH2 x 25mm
    DeWALT DT7238-QZ - Torsion Screwdriver Bits PH2 x 25mm
      DeWALT - Torsion Screwdriver Bits PH2 x 25mm Model # DT7238-QZ

     
    • For use with cordless or corded drills/screwdriver
    • For all screwdriving applications
    • For installation and Facade
    DeWALT DT7245-QZ - Torsion Screwdriver Bits PH1 x 50mm
      DeWALT - Torsion Screwdriver Bits PH1 x 50mm Model # DT7245-QZ

     
    • For use with cordless or corded drills/screwdriver
    • For all screwdriving applications
    • For installation and Facade
    DeWALT DT7246-QZ - Torsion Screwdriver Bits PH2 x 50mm
      DeWALT - Torsion Screwdriver Bits PH2 x 50mm Model # DT7246-QZ

     
    • For use with cordless or corded drills/screwdriver
    • For all screwdriving applications
    • For installation and Facade
    DeWALT DT7247-QZ - Torsion Screwdriver Bits PH3 x 50mm
      DeWALT - Torsion Screwdriver Bits PH3 x 50mm Model # DT7247-QZ

     
    • For use with cordless or corded drills/screwdriver
    • For all screwdriving applications
    • For installation and Facade
    DeWALT DT7255-QZ - Torx Screwdriver Bit T20 x 25mM
      DeWALT - Torx Screwdriver Bit T20 x 25mM Model # DT7255-QZ

     
    • For use with cordless or corded drills/screwdriver
    • For all screwdriving applications
    • For installation and Facade
    DeWALT DT7256-QZ - Torx Screwdriver Bit T25 x 25mM
      DeWALT - Torx Screwdriver Bit T25 x 25mM Model # DT7256-QZ

     
    • For use with cordless or corded drills/screwdriver
    • For all screwdriving applications
    • For installation and Facade
    DeWALT DT7401-QZ - Magnetic Nut Holder – Hex 7mm
      DeWALT - Magnetic Nut Holder – Hex 7mm Model # DT7401-QZ

     
    • For use with cordless or corded impact range
    • Fastening applications in automotive repare; heavy equipment maintenance; product assemble and major construction projects
    DeWALT DT7402-QZ - Magnetic Nut Holder – Hex 8mm
      DeWALT - Magnetic Nut Holder – Hex 8mm Model # DT7402-QZ

     
    • For use with cordless or corded impact range
    • Fastening applications in automotive repare; heavy equipment maintenance; product assemble and major construction projects
    DeWALT DT7403-QZ - Magnetic Nut Holder – Hex 10mm
      DeWALT - Magnetic Nut Holder – Hex 10mm Model # DT7403-QZ

     
    • For use with cordless or corded impact range
    • Fastening applications in automotive repare; heavy equipment maintenance; product assemble and major construction projects
    DeWALT DT7404-QZ - Magnetic Nut Holder – Hex 13mm
      DeWALT - Magnetic Nut Holder – Hex 13mm Model # DT7404-QZ

     
    • For use with cordless or corded impact range
    • Fastening applications in automotive repare; heavy equipment maintenance; product assemble and major construction projects
    DeWALT DT7500-QZ - Magnetic Bit Holder – Length 60mm
      DeWALT - Magnetic Bit Holder – Length 60mm Model # DT7500-QZ

     
    • For use with cordless or corded impact range
    • Fastening applications in automotive repare; heavy equipment maintenance; product assemble and major construction projects
    DeWALT DT7916-QZ - Screwdriver Bits Set  Pcs
      DeWALT - Screwdriver Bits Set Pcs Model # DT7916-QZ

     
    • For use in hard and soft wood; composite board and MDF
    • Ideal for cabinet making; furniture assembly; remodelling and shop fitting.
    DeWALT DT7926-XJ - Extreme 2 Metal Drill Bit Set 29 Piece
    DeWALT DT8087-QZ - SDS-Max Pointed Chisel 600mm
      DeWALT - SDS-Max Pointed Chisel 600mm Model # DT8087-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT8088-QZ - SDS-Max Flat Chisel L600XW25
      DeWALT - SDS-Max Flat Chisel L600XW25 Model # DT8088-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT8101-QZ - Holesaw Mandrel 14-29mm
    DeWALT DT8102-QZ - Holesaw Mandrel 32 – 210MM
    DeWALT DT8116-QZ - 16mm Bi-Metal High Performance Holesaw
      DeWALT - 16mm Bi-Metal High Performance Holesaw Model # DT8116-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8119-QZ - 19mm Bi-Metal High Performance Holesaw
      DeWALT - 19mm Bi-Metal High Performance Holesaw Model # DT8119-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8120-QZ - 20mm Bi-Metal High Performance Holesaw
      DeWALT - 20mm Bi-Metal High Performance Holesaw Model # DT8120-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8122-QZ - 22mm Bi-Metal High Performance Holesaw
      DeWALT - 22mm Bi-Metal High Performance Holesaw Model # DT8122-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8125-QZ - 25mm Bi-Metal High Performance Holesaw
      DeWALT - 25mm Bi-Metal High Performance Holesaw Model # DT8125-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8127-QZ - 27mm Bi-Metal High Performance Holesaw
      DeWALT - 27mm Bi-Metal High Performance Holesaw Model # DT8127-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8130-QZ - 30mm Bi-Metal High Performance Holesaw
      DeWALT - 30mm Bi-Metal High Performance Holesaw Model # DT8130-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8132-QZ - 32mm Bi-Metal High Performance Holesaw
      DeWALT - 32mm Bi-Metal High Performance Holesaw Model # DT8132-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8135-QZ - 35mm Bi-Metal High Performance Holesaw
      DeWALT - 35mm Bi-Metal High Performance Holesaw Model # DT8135-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8138-QZ - 38mm Bi-Metal High Performance Holesaw
      DeWALT - 38mm Bi-Metal High Performance Holesaw Model # DT8138-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8140-QZ - 41mm Bi-Metal High Performance Holesaw
      DeWALT - 41mm Bi-Metal High Performance Holesaw Model # DT8140-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8141-QZ - 40mm Bi-Metal High Performance Holesaw
      DeWALT - 40mm Bi-Metal High Performance Holesaw Model # DT8141-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8145-QZ - 44mm Bi-Metal High Performance Holesaw
      DeWALT - 44mm Bi-Metal High Performance Holesaw Model # DT8145-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8148-QZ - 48mm Bi-Metal High Performance Holesaw
      DeWALT - 48mm Bi-Metal High Performance Holesaw Model # DT8148-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8151-QZ - 51mm Bi-Metal High Performance Holesaw
      DeWALT - 51mm Bi-Metal High Performance Holesaw Model # DT8151-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8154-QZ - 54mm Bi-Metal High Performance Holesaw
      DeWALT - 54mm Bi-Metal High Performance Holesaw Model # DT8154-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8160-QZ - 60mm Bi-Metal High Performance Holesaw
      DeWALT - 60mm Bi-Metal High Performance Holesaw Model # DT8160-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8164-QZ - 64mm Bi-Metal High Performance Holesaw
      DeWALT - 64mm Bi-Metal High Performance Holesaw Model # DT8164-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8167-QZ - 67mm Bi-Metal High Performance Holesaw
      DeWALT - 67mm Bi-Metal High Performance Holesaw Model # DT8167-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8170-QZ - 70mm Bi-Metal High Performance Holesaw
      DeWALT - 70mm Bi-Metal High Performance Holesaw Model # DT8170-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8173-QZ - 73mm Bi-Metal High Performance Holesaw
      DeWALT - 73mm Bi-Metal High Performance Holesaw Model # DT8173-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8176-QZ - 76mm Bi-Metal High Performance Holesaw
      DeWALT - 76mm Bi-Metal High Performance Holesaw Model # DT8176-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8202-QZ - 102mm Bi-Metal High Performance Holesaw
      DeWALT - 102mm Bi-Metal High Performance Holesaw Model # DT8202-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8214-QZ - 114mm Bi-Metal High Performance Holesaw
      DeWALT - 114mm Bi-Metal High Performance Holesaw Model # DT8214-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8221-QZ - 121mm Bi-Metal High Performance Holesaw
      DeWALT - 121mm Bi-Metal High Performance Holesaw Model # DT8221-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8227-QZ - 127mm Bi-Metal High Performance Holesaw
      DeWALT - 127mm Bi-Metal High Performance Holesaw Model # DT8227-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8240-QZ - 140mm Bi-Metal High Performance Holesaw
      DeWALT - 140mm Bi-Metal High Performance Holesaw Model # DT8240-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8252-QZ - 152mm Bi-Metal High Performance Holesaw
      DeWALT - 152mm Bi-Metal High Performance Holesaw Model # DT8252-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass; copper; aluminum;wood;plastic and other composites

    DeWALT DT84500-QZ - Magnetic Drill Cutter; 25mm Cutter – 14mm Dia
    DeWALT DT84501-QZ - Magnetic Drill Cutter; 25mm Cutter – 16mm Dia
    DeWALT DT84502-QZ - Magnetic Drill Cutter; 50mm Cutter – 18mm Dia
    DeWALT DT84503-QZ - Magnetic Drill Cutter; 50mm Cutter – 20mm Dia
    DeWALT DT84504-QZ - Magnetic Drill Cutter; 50mmCutter – 22mm Dia
    DeWALT DT84505-QZ - Magnetic Drill Cutter; 50mm Cutter – 24mm Dia
    DeWALT DT84506-QZ - Magnetic Drill Cutter; 50mm Cutter – 26mm Dia
    DeWALT DT84507-QZ - Magnetic Drill Cutter; 50mm Cutter – 28mm Dia
    DeWALT DT84508-QZ - Magnetic Drill Cutter; 50mm Cutter – 30mm Dia
    DeWALT DT84509-QZ - Magnetic Drill Cutter; 50mm Cutter – 32mm Dia
    DeWALT DT84510-QZ - Magnetic Drill Cutter; 50mm Cutter – 40mm Dia
    DeWALT DT84511-QZ - Magnetic Drill Cutter; 50mm Cutter – 50mm Dia
    DeWALT DT84512-QZ - Magnetic Drill Cutter; 2 x Pilot pin
    DeWALT DT8472-QZ - Bandsaw Blade
    DeWALT DT8473-QZ - Bandsaw Blade
    DeWALT DT8474-QZ - Bandsaw Blade
      DeWALT - Bandsaw Blade Model # DT8474-QZ

     

    For use with DW876

    DeWALT DT8475-QZ - Non Ferrous Bandsaw Blade; 6mm
      DeWALT - Non Ferrous Bandsaw Blade; 6mm Model # DT8475-QZ

     

    For use with DW876

    DeWALT DT8476-QZ - Non Ferrous Metal Bandsaw Blade; 12mm
    DeWALT DT8481-QZ - General Purpose Bandsaw Blade -12mm
      DeWALT - General Purpose Bandsaw Blade -12mm Model # DT8481-QZ

     

    For use with DW738

    DeWALT DT8482-QZ - Thick wood Bandsaw blade; 16mm
      DeWALT - Thick wood Bandsaw blade; 16mm Model # DT8482-QZ

     

    For use with DW738

    DeWALT DT8484-QZ - Non ferrous metals Bandsaw Blade; 6mm
    DeWALT DT8485-QZ - Non ferrous metals Bandsaw Blade; 12mm
    DeWALT DT8486-QZ - Laminated Wood Bandsaw Blade; 10mm
      DeWALT - Laminated Wood Bandsaw Blade; 10mm Model # DT8486-QZ

     

    For use with DW738

    DeWALT DT8912-QZ - SDS-Plus Bit – XLR D6 x L110 x WL50
      DeWALT - SDS-Plus Bit – XLR D6 x L110 x WL50 Model # DT8912-QZ

     

    Suitable for drilling plug & anchor holes in masonry;
    all types of stone and concrete.

    DeWALT DT8913-QZ - SDS-Plus Bit – XLR D6 x L160 x WL100
      DeWALT - SDS-Plus Bit – XLR D6 x L160 x WL100 Model # DT8913-QZ

     

    Suitable for drilling plug & anchor holes in masonry;
    all types of stone and concrete.

    DeWALT DT8923-QZ - SDS-Plus Bit – XLR D8 x L160 x WL100
      DeWALT - SDS-Plus Bit – XLR D8 x L160 x WL100 Model # DT8923-QZ

     

    Suitable for drilling plug & anchor holes in masonry;
    all types of stone and concrete.

    DeWALT DT8928-QZ - SDS-Plus Bit – XLR D10 x L160 x WL100
      DeWALT - SDS-Plus Bit – XLR D10 x L160 x WL100 Model # DT8928-QZ

     

    Suitable for drilling plug & anchor holes in masonry;
    all types of stone and concrete.

    DeWALT DT8933-QZ - SDS-Plus Bit – XLR D12 x L160 x WL100
      DeWALT - SDS-Plus Bit – XLR D12 x L160 x WL100 Model # DT8933-QZ

     

    Suitable for drilling plug & anchor holes in masonry;
    all types of stone and concrete.

    DeWALT DT8939-QZ - SDS-Plus Bit – XLR D14 x L200 x WL150
      DeWALT - SDS-Plus Bit – XLR D14 x L200 x WL150 Model # DT8939-QZ

     

    Suitable for drilling plug & anchor holes in masonry;
    all types of stone and concrete.

    DeWALT DT9400-QZ - SDS-Max Bit Professional 12mm X 340mm X 200mm – 2 Cutters
      DeWALT - SDS-Max Bit Professional 12mm X 340mm X 200mm – 2 Cutters Model # DT9400-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9401-QZ - SDS-Max Bit Professional 12mm X 540mm X 400mm – 2 Cutters
      DeWALT - SDS-Max Bit Professional 12mm X 540mm X 400mm – 2 Cutters Model # DT9401-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9403-QZ - SDS-Max Bit Professional 13mm X 340mm X 200mm – 2 Cutters
      DeWALT - SDS-Max Bit Professional 13mm X 340mm X 200mm – 2 Cutters Model # DT9403-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9404-QZ - SDS-Max Bit Professional 13mm X 540mm X 400mm – 2 Cutters
      DeWALT - SDS-Max Bit Professional 13mm X 540mm X 400mm – 2 Cutters Model # DT9404-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9405-QZ - SDS-Max Bit Professional 14mm X 340mm X 200mm – 2 Cutters
      DeWALT - SDS-Max Bit Professional 14mm X 340mm X 200mm – 2 Cutters Model # DT9405-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9406-QZ - SDS-Max Bit Professional 14mm X 540mm X 400mm – 2 Cutters
      DeWALT - SDS-Max Bit Professional 14mm X 540mm X 400mm – 2 Cutters Model # DT9406-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9407-QZ - SDS-Max Bit Professional 15mm X 340mm X 200mm – 2 Cutters
      DeWALT - SDS-Max Bit Professional 15mm X 340mm X 200mm – 2 Cutters Model # DT9407-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9408-QZ - SDS-Max Bit Professional 15mm X 540mm X 400mm – 2 Cutters
      DeWALT - SDS-Max Bit Professional 15mm X 540mm X 400mm – 2 Cutters Model # DT9408-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9409-QZ - SDS-Max Bit Professional 16mm X 340mm X 200mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 16mm X 340mm X 200mm – 4 Cutters Model # DT9409-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9410-QZ - SDS-Max Bit Professional 16mm X 540mm X 400mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 16mm X 540mm X 400mm – 4 Cutters Model # DT9410-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9411-QZ - SDS-Max Bit Professional 18mm X 340mm X 200mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 18mm X 340mm X 200mm – 4 Cutters Model # DT9411-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9412-QZ - SDS-Max Bit Professional 18mm X 540mm X 400mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 18mm X 540mm X 400mm – 4 Cutters Model # DT9412-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9416-QZ - SDS-Max Bit Professional 20mm X 340mm X 200mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 20mm X 340mm X 200mm – 4 Cutters Model # DT9416-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9417-QZ - SDS-Max Bit Professional 20mm X 540mm X 400mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 20mm X 540mm X 400mm – 4 Cutters Model # DT9417-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9418-QZ - SDS-Max Bit Professional 20mm X 920mm X 800mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 20mm X 920mm X 800mm – 4 Cutters Model # DT9418-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9419-QZ - SDS-Max Bit Professional 22mm X 340mm X 200mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 22mm X 340mm X 200mm – 4 Cutters Model # DT9419-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9420-QZ - SDS-Max Bit Professional 22mm X 540mm X 400mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 22mm X 540mm X 400mm – 4 Cutters Model # DT9420-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9421-QZ - SDS-Max Bit Professional 22mm X 920mm X 800mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 22mm X 920mm X 800mm – 4 Cutters Model # DT9421-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9422-QZ - SDS-Max Bit Professional 24mm X 340mm X 200mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 24mm X 340mm X 200mm – 4 Cutters Model # DT9422-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9423-QZ - SDS-Max Bit Professional 24mm X 540mm X 400mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 24mm X 540mm X 400mm – 4 Cutters Model # DT9423-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9424-QZ - SDS-Max Bit Professional 25mm X 340mm X 200mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 25mm X 340mm X 200mm – 4 Cutters Model # DT9424-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9425-QZ - SDS-Max Bit Professional 25mm X 540mm X 400mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 25mm X 540mm X 400mm – 4 Cutters Model # DT9425-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9426-QZ - SDS-Max Bit Professional 25mm X 920mm X 800mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 25mm X 920mm X 800mm – 4 Cutters Model # DT9426-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9427-QZ - SDS-Max Bit Professional 26mm X 340mm X 200mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 26mm X 340mm X 200mm – 4 Cutters Model # DT9427-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9428-QZ - SDS-Max Bit Professional 26mm X 540mm X 400mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 26mm X 540mm X 400mm – 4 Cutters Model # DT9428-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9429-QZ - SDS-Max Bit Professional 28mm X 380mm X 250mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 28mm X 380mm X 250mm – 4 Cutters Model # DT9429-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9430-QZ - SDS-Max Bit Professional 28mm X 570mm X 450mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 28mm X 570mm X 450mm – 4 Cutters Model # DT9430-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9431-QZ - SDS-Max Bit Professional 28mm X 670mm X 550mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 28mm X 670mm X 550mm – 4 Cutters Model # DT9431-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9432-QZ - SDS-Max Bit Professional 30mm X 380mm X 250mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 30mm X 380mm X 250mm – 4 Cutters Model # DT9432-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9433-QZ - SDS-Max Bit Professional 30mm X 570mm X 450mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 30mm X 570mm X 450mm – 4 Cutters Model # DT9433-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9434-QZ - SDS-Max Bit Professional 32mm X 380mm X 250mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 32mm X 380mm X 250mm – 4 Cutters Model # DT9434-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9435-QZ - SDS-Max Bit Professional 32mm X 570mm X 450mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 32mm X 570mm X 450mm – 4 Cutters Model # DT9435-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9436-QZ - SDS-Max Bit Professional 32mm X 920mm X 800mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 32mm X 920mm X 800mm – 4 Cutters Model # DT9436-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9438-QZ - SDS-Max Bit Professional 35mm X 570mm X 450mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 35mm X 570mm X 450mm – 4 Cutters Model # DT9438-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9439-QZ - SDS-Max Bit Professional 35mm X 670mm X 550mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 35mm X 670mm X 550mm – 4 Cutters Model # DT9439-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9440-QZ - SDS-Max Bit Professional 36mm X 570mm X 450mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 36mm X 570mm X 450mm – 4 Cutters Model # DT9440-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9441-QZ - SDS-Max Bit Professional 38mm X 380mm X 250mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 38mm X 380mm X 250mm – 4 Cutters Model # DT9441-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9442-QZ - SDS-Max Bit Professional 38mm X 570mm X 450mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 38mm X 570mm X 450mm – 4 Cutters Model # DT9442-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9444-QZ - SDS-Max Bit Professional 40mm X 380mm X 250mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 40mm X 380mm X 250mm – 4 Cutters Model # DT9444-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9445-QZ - SDS-Max Bit Professional 40mm X 570mm X 450mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 40mm X 570mm X 450mm – 4 Cutters Model # DT9445-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9448-QZ - SDS-Max Bit Professional 45mm X 570mm X 450mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 45mm X 570mm X 450mm – 4 Cutters Model # DT9448-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9450-QZ - SDS-Max Bit Professional 52mm X 570mm X 450mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 52mm X 570mm X 450mm – 4 Cutters Model # DT9450-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9502-QZ - SDS-Max Drill Bit 4mm X 110mm X 50mm
    DeWALT DT9504-QZ - SDS-Plus Bit  5mm X 110mm X 50mm
      DeWALT - SDS-Plus Bit 5mm X 110mm X 50mm Model # DT9504-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9505-QZ - SDS-Plus Bit  5mm X 160mm X 100mm
      DeWALT - SDS-Plus Bit 5mm X 160mm X 100mm Model # DT9505-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9506-QZ - SDS-Plus Bit  5mm X 210mm X 150mm
      DeWALT - SDS-Plus Bit 5mm X 210mm X 150mm Model # DT9506-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9514-QZ - SDS-Plus Bit  6mm X 110mm X 50mm
      DeWALT - SDS-Plus Bit 6mm X 110mm X 50mm Model # DT9514-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9515-QZ - SDS-Plus Bit  6mm X 160mm X 100mm
      DeWALT - SDS-Plus Bit 6mm X 160mm X 100mm Model # DT9515-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9516-QZ - SDS-Plus Bit  6mm X 210mm X 150mm
      DeWALT - SDS-Plus Bit 6mm X 210mm X 150mm Model # DT9516-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9517-QZ - SDS-Plus Bit  6mm X 260mm X 200mm
      DeWALT - SDS-Plus Bit 6mm X 260mm X 200mm Model # DT9517-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9521-QZ - SDS-Plus Bit  6.5mm X 210mm X 150mm
      DeWALT - SDS-Plus Bit 6.5mm X 210mm X 150mm Model # DT9521-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9524-QZ - SDS-Plus Bit  7mm X 110mm X 50mm
      DeWALT - SDS-Plus Bit 7mm X 110mm X 50mm Model # DT9524-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9525-QZ - SDS-Plus Bit  7mm X 160mm X 100mm
      DeWALT - SDS-Plus Bit 7mm X 160mm X 100mm Model # DT9525-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9526-QZ - SDS-Plus Bit  7mm X 210mm X 150mm
      DeWALT - SDS-Plus Bit 7mm X 210mm X 150mm Model # DT9526-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9528-QZ - SDS-Plus Bit  8mm X 110mm X 50mm
      DeWALT - SDS-Plus Bit 8mm X 110mm X 50mm Model # DT9528-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9529-QZ - SDS-Plus Bit  8mm X 160mm X 100mm
      DeWALT - SDS-Plus Bit 8mm X 160mm X 100mm Model # DT9529-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9530-QZ - SDS-Plus Bit  8mm X 210mm X 150mm
      DeWALT - SDS-Plus Bit 8mm X 210mm X 150mm Model # DT9530-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9531-QZ - SDS-Plus Bit  8mm X 260mm X 200mm
      DeWALT - SDS-Plus Bit 8mm X 260mm X 200mm Model # DT9531-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9532-QZ - SDS-Plus Bit  8mm X 310mm X 250mm
      DeWALT - SDS-Plus Bit 8mm X 310mm X 250mm Model # DT9532-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9534-QZ - SDS-Plus Bit  8mm X 460mm X 400mm
      DeWALT - SDS-Plus Bit 8mm X 460mm X 400mm Model # DT9534-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9539-QZ - SDS-Plus Bit  10mm X 110mm X 50mm
      DeWALT - SDS-Plus Bit 10mm X 110mm X 50mm Model # DT9539-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9540-QZ - SDS-Plus Bit  10mm X 160mm X 100mm
      DeWALT - SDS-Plus Bit 10mm X 160mm X 100mm Model # DT9540-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9541-QZ - SDS-Plus Bit  10mm X 210mm X 150mm
      DeWALT - SDS-Plus Bit 10mm X 210mm X 150mm Model # DT9541-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9542-QZ - SDS-Plus Bit  10mm X 260mm X 200mm
      DeWALT - SDS-Plus Bit 10mm X 260mm X 200mm Model # DT9542-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9543-QZ - SDS-Plus Bit  10mm X 310mm X 250mm
      DeWALT - SDS-Plus Bit 10mm X 310mm X 250mm Model # DT9543-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9544-QZ - SDS-Plus Bit  10mm X 350mm X 300mm
      DeWALT - SDS-Plus Bit 10mm X 350mm X 300mm Model # DT9544-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9545-QZ - SDS-Plus Bit  10mm X 460mm X 400mm
      DeWALT - SDS-Plus Bit 10mm X 460mm X 400mm Model # DT9545-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9552-QZ - SDS-Plus Bit  12mm X 160mm X 100mm
      DeWALT - SDS-Plus Bit 12mm X 160mm X 100mm Model # DT9552-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9553-QZ - SDS-Plus Bit  12mm X 200mm X 150mm
      DeWALT - SDS-Plus Bit 12mm X 200mm X 150mm Model # DT9553-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9554-QZ - SDS-Plus Bit  12mm X 260mm X 200mm
      DeWALT - SDS-Plus Bit 12mm X 260mm X 200mm Model # DT9554-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9555-QZ - SDS-Plus Bit  12mm X 300mm X 250mm
      DeWALT - SDS-Plus Bit 12mm X 300mm X 250mm Model # DT9555-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9556-QZ - SDS-Plus Bit  12mm X 350mm X 300mm
      DeWALT - SDS-Plus Bit 12mm X 350mm X 300mm Model # DT9556-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9557-QZ - SDS-Plus Bit  12mm X 450mm X 400mm
      DeWALT - SDS-Plus Bit 12mm X 450mm X 400mm Model # DT9557-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9560-QZ - SDS-Plus Bit  13mm X 160mm X 100mm
      DeWALT - SDS-Plus Bit 13mm X 160mm X 100mm Model # DT9560-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9566-QZ - SDS-Plus Bit  14mm X 160mm X 100mm
      DeWALT - SDS-Plus Bit 14mm X 160mm X 100mm Model # DT9566-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9567-QZ - SDS-Plus Bit  14mm X 200mm X 150mm
      DeWALT - SDS-Plus Bit 14mm X 200mm X 150mm Model # DT9567-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9568-QZ - SDS-Plus Bit  14mm X 260mm X 200mm
      DeWALT - SDS-Plus Bit 14mm X 260mm X 200mm Model # DT9568-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9569-QZ - SDS-Plus Bit  14mm X 300mm X 250mm
      DeWALT - SDS-Plus Bit 14mm X 300mm X 250mm Model # DT9569-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9570-QZ - SDS-Plus Bit  14mm X 450mm X 400mm
      DeWALT - SDS-Plus Bit 14mm X 450mm X 400mm Model # DT9570-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9575-QZ - SDS-Plus Bit  15mm X 260mm X 200mm
    DeWALT DT9578-QZ - SDS-Plus Bit  16mm X 160mm X 100mm
      DeWALT - SDS-Plus Bit 16mm X 160mm X 100mm Model # DT9578-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9579-QZ - SDS-Plus Bit  16mm X 200mm X 150mm
      DeWALT - SDS-Plus Bit 16mm X 200mm X 150mm Model # DT9579-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9580-QZ - SDS-Plus Bit  16mm X 260mm X 200mm
      DeWALT - SDS-Plus Bit 16mm X 260mm X 200mm Model # DT9580-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9581-QZ - SDS-Plus Bit  16mm X 300mm X 250mm
      DeWALT - SDS-Plus Bit 16mm X 300mm X 250mm Model # DT9581-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9582-QZ - SDS-Plus Bit  16mm X 450mm X 400mm
      DeWALT - SDS-Plus Bit 16mm X 450mm X 400mm Model # DT9582-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9583-QZ - SDS-Plus Bit  16mm X 600mm X 550mm
      DeWALT - SDS-Plus Bit 16mm X 600mm X 550mm Model # DT9583-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9587-QZ - SDS-Plus Bit  18mm X 200mm X 150mm
      DeWALT - SDS-Plus Bit 18mm X 200mm X 150mm Model # DT9587-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9588-QZ - SDS-Plus Bit  18mm X 250mm X 200mm
      DeWALT - SDS-Plus Bit 18mm X 250mm X 200mm Model # DT9588-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9589-QZ - SDS-Plus Bit  18mm X 300mm X 250mm
      DeWALT - SDS-Plus Bit 18mm X 300mm X 250mm Model # DT9589-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9590-QZ - SDS-Plus Bit  18mm X 450mm X 400mm
      DeWALT - SDS-Plus Bit 18mm X 450mm X 400mm Model # DT9590-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9597-QZ - SDS-Plus Bit  20mm X 200mm X 150mm
      DeWALT - SDS-Plus Bit 20mm X 200mm X 150mm Model # DT9597-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9598-QZ - SDS-Plus Bit  20mm X 300mm X 250mm
      DeWALT - SDS-Plus Bit 20mm X 300mm X 250mm Model # DT9598-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9599-QZ - SDS-Plus Bit  20mm X 450mm X 400mm
      DeWALT - SDS-Plus Bit 20mm X 450mm X 400mm Model # DT9599-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9600-QZ - SDS-Plus Bit  20mm X 600mm X 550mm
      DeWALT - SDS-Plus Bit 20mm X 600mm X 550mm Model # DT9600-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9602-QZ - SDS-Plus Bit  22mm X 250mm X 200mm
      DeWALT - SDS-Plus Bit 22mm X 250mm X 200mm Model # DT9602-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9603-QZ - SDS-Plus Bit  22mm X 300mm X 250mm
      DeWALT - SDS-Plus Bit 22mm X 300mm X 250mm Model # DT9603-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9604-QZ - SDS-Plus Bit  22mm X 450mm X 400mm
      DeWALT - SDS-Plus Bit 22mm X 450mm X 400mm Model # DT9604-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9609-QZ - SDS-Plus Bit  24mm X 250mm X 200mm
      DeWALT - SDS-Plus Bit 24mm X 250mm X 200mm Model # DT9609-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9610-QZ - SDS-Plus Bit  24mm X 450mm X 400mm
      DeWALT - SDS-Plus Bit 24mm X 450mm X 400mm Model # DT9610-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9611-QZ - SDS-Plus Bit  25mm X 250mm X 200mm
      DeWALT - SDS-Plus Bit 25mm X 250mm X 200mm Model # DT9611-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9612-QZ - SDS-Plus Bit  25mm X 300mm X 250mm
      DeWALT - SDS-Plus Bit 25mm X 300mm X 250mm Model # DT9612-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9613-QZ - SDS-Plus Bit  25mm X 450mm X 400mm
      DeWALT - SDS-Plus Bit 25mm X 450mm X 400mm Model # DT9613-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9615-QZ - SDS-Plus Bit 26mm X 250mm X 200mm
    DeWALT DT9616-QZ - SDS-Plus Bit 26mm X 450mm X 400mm
    DeWALT DT9700-QZ - SDS-Plus Bit  Plastic cassette 4Pcs Set
      DeWALT - SDS-Plus Bit Plastic cassette 4Pcs Set Model # DT9700-QZ

     

    Suitable for drilling concrete; brick and block

    DeWALT DW00700-AE - SDS Plus Drill Bit  4mm X 50mm X 110mm
      DeWALT - SDS Plus Drill Bit 4mm X 50mm X 110mm Model # DW00700-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00701-AE - SDS Plus Drill Bit  5mm X 45mm X 110mm
      DeWALT - SDS Plus Drill Bit 5mm X 45mm X 110mm Model # DW00701-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00702-AE - SDS Plus Drill Bit 6mm X 50mm X 110mm
      DeWALT - SDS Plus Drill Bit 6mm X 50mm X 110mm Model # DW00702-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00703-AE - SDS Plus Drill Bit 6mm X 95mm X 160mm
      DeWALT - SDS Plus Drill Bit 6mm X 95mm X 160mm Model # DW00703-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00705-AE - SDS Plus Drill Bit 8mm X 50mm X 110mm
      DeWALT - SDS Plus Drill Bit 8mm X 50mm X 110mm Model # DW00705-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00706-AE - SDS Plus Drill Bit 8mm X 95mm X 160mm
      DeWALT - SDS Plus Drill Bit 8mm X 95mm X 160mm Model # DW00706-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00707-AE - SDS Plus Drill Bit  8mm X 150mm X 210mm
      DeWALT - SDS Plus Drill Bit 8mm X 150mm X 210mm Model # DW00707-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00708-AE - SDS Plus Drill Bit  10mm X 50mm X 110mm
      DeWALT - SDS Plus Drill Bit 10mm X 50mm X 110mm Model # DW00708-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00709-AE - SDS Plus Drill Bit  10mm X 95mm X 160mm
      DeWALT - SDS Plus Drill Bit 10mm X 95mm X 160mm Model # DW00709-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00710-AE - SDS Plus Drill Bit  10mm X 150mm X 210mm
      DeWALT - SDS Plus Drill Bit 10mm X 150mm X 210mm Model # DW00710-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00711-AE - SDS Plus Drill Bit  10mm X 270mm X 350mm
      DeWALT - SDS Plus Drill Bit 10mm X 270mm X 350mm Model # DW00711-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00712-AE - SDS Plus Drill Bit  12mm X 95mm X 160mm
      DeWALT - SDS Plus Drill Bit 12mm X 95mm X 160mm Model # DW00712-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00713-AE - SDS Plus Drill Bit 12mm X 410mm X 460mm
      DeWALT - SDS Plus Drill Bit 12mm X 410mm X 460mm Model # DW00713-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00714-AE - SDS Plus Drill Bit  13mm X 100mm X 160mm
      DeWALT - SDS Plus Drill Bit 13mm X 100mm X 160mm Model # DW00714-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00715-AE - SDS Plus Drill Bit  13mm X 250mm X 300mm
      DeWALT - SDS Plus Drill Bit 13mm X 250mm X 300mm Model # DW00715-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00716-AE - SDS Plus Drill Bit  14mm X 100mm X 160mm
      DeWALT - SDS Plus Drill Bit 14mm X 100mm X 160mm Model # DW00716-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00717-AE - SDS Plus Drill Bit  16mm X 100mm X 160mm
      DeWALT - SDS Plus Drill Bit 16mm X 100mm X 160mm Model # DW00717-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00718-AE - SDS Plus Drill Bit  16mm X 150mm X 200mm
      DeWALT - SDS Plus Drill Bit 16mm X 150mm X 200mm Model # DW00718-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00719-AE - SDS Plus Drill Bit  16mm X 250mm X 300mm
      DeWALT - SDS Plus Drill Bit 16mm X 250mm X 300mm Model # DW00719-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00720-AE - SDS Plus Drill Bit  16mm X 410mm X 460mm
      DeWALT - SDS Plus Drill Bit 16mm X 410mm X 460mm Model # DW00720-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00721-AE - SDS Plus Drill Bit  18mm X 150mm X 200mm
      DeWALT - SDS Plus Drill Bit 18mm X 150mm X 200mm Model # DW00721-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00725-AE - SDS Plus Drill Bit  20mm X 150mm X 200mm
      DeWALT - SDS Plus Drill Bit 20mm X 150mm X 200mm Model # DW00725-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00726-AE - SDS Plus Drill Bit  20mm X 250mm X 300mm
      DeWALT - SDS Plus Drill Bit 20mm X 250mm X 300mm Model # DW00726-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00729-AE - SDS Plus Drill Bit  22mm X 250mm X 300mm
      DeWALT - SDS Plus Drill Bit 22mm X 250mm X 300mm Model # DW00729-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00730-AE - SDS Plus Drill Bit  22mm X 400mm X 450mm
      DeWALT - SDS Plus Drill Bit 22mm X 400mm X 450mm Model # DW00730-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00731-AE - SDS Plus Drill Bit  25mm X 200mm X 250mm
      DeWALT - SDS Plus Drill Bit 25mm X 200mm X 250mm Model # DW00731-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00732-AE - SDS Plus Drill Bit  25mm X 400mm X 450mm
      DeWALT - SDS Plus Drill Bit 25mm X 400mm X 450mm Model # DW00732-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00733-AE - SDS Plus Drill Bit 6mm X 150mm X 210mm
      DeWALT - SDS Plus Drill Bit 6mm X 150mm X 210mm Model # DW00733-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00736-AE - SDS Plus Drill Bit  12mm X 150mm X 200mm
      DeWALT - SDS Plus Drill Bit 12mm X 150mm X 200mm Model # DW00736-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00737-AE - SDS Plus Drill Bit  14mm X 150mm X 200mm
      DeWALT - SDS Plus Drill Bit 14mm X 150mm X 200mm Model # DW00737-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00739-AE - SDS Plus Drill Bit  12mm X 200mm X 266mm
      DeWALT - SDS Plus Drill Bit 12mm X 200mm X 266mm Model # DW00739-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00740-AE - SDS Plus Drill Bit  14mm X 350mm X 300mm
      DeWALT - SDS Plus Drill Bit 14mm X 350mm X 300mm Model # DW00740-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW4988 - Angle Grinder Polishing Bonnet; 178mm
    DeWALT DWA0801-B1 - SDS Plus Point Chisel 250 mm
      DeWALT - SDS Plus Point Chisel 250 mm Model # DWA0801-B1

     

    For light chipping and chiselling of tile; mortar; glazing compounds and other masonry products withhammers with a rotation stop feature.

    DeWALT DWA0802-B1 - SDS Plus Flat Chisel 250 x 20 mm
      DeWALT - SDS Plus Flat Chisel 250 x 20 mm Model # DWA0802-B1

     

    For light chipping and chiselling of tile; mortar; glazing compounds and other masonry products withhammers with a rotation stop feature.

    DeWALT DWA0803-B1 - SDS Plus Flat Chisel 200 x 40 mm
      DeWALT - SDS Plus Flat Chisel 200 x 40 mm Model # DWA0803-B1

     

    For light chipping and chiselling of tile; mortar; glazing compounds and other masonry products withhammers with a rotation stop feature.

    DeWALT DWA0804-B1 - SDS Max Pointed Chisel 300 mm
      DeWALT - SDS Max Pointed Chisel 300 mm Model # DWA0804-B1

     

    Specially toughened steel and micro-processor controlled heat treatment ensures consistent tough bits with long life.

    DeWALT DWA0805-B1 - SDS Max Pointed Chisel 400 mm
      DeWALT - SDS Max Pointed Chisel 400 mm Model # DWA0805-B1

     

    Specially toughened steel and micro-processor controlled heat treatment ensures consistent tough bits with long life.

    DeWALT DWA0806-B1 - SDS Max Flat Chisel 300 x 25 mm
      DeWALT - SDS Max Flat Chisel 300 x 25 mm Model # DWA0806-B1

     

    Specially toughened steel and micro-processor controlled heat treatment ensures consistent tough bits with long life.

    DeWALT DWA0807-B1 - SDS Max Flat Chisel 400 x 25 mm
      DeWALT - SDS Max Flat Chisel 400 x 25 mm Model # DWA0807-B1

     

    Specially toughened steel and micro-processor controlled heat treatment ensures consistent tough bits with long life.

    DeWALT DWA0808-B1 - SDS Max Flat Chisel 400 x 50 mm
      DeWALT - SDS Max Flat Chisel 400 x 50 mm Model # DWA0808-B1

     

    Specially toughened steel and micro-processor controlled heat treatment ensures consistent tough bits with long life.

    DeWALT DWA0809-B1 - 19mm Hex Pointed Chisel 400 mm
      DeWALT - 19mm Hex Pointed Chisel 400 mm Model # DWA0809-B1

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles;general masonry and mortar.

    <
    DeWALT DWA0810-B1 - 19mm Hex Pointed Chisel 600 mm
      DeWALT - 19mm Hex Pointed Chisel 600 mm Model # DWA0810-B1

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles;general masonry and mortar.