Surveying Equipment

• Allows users to apply a signal to a cable or pipe when direct connection is not possible
• Can be used with frequencies from 8 kHz to 262 kHz
• Compatible with any Seek Tech Line Transmitter (sold separately)

• Purpose-built system locates ground faults in direct buried insulated wire
• Locates insulation faults up to 2 meg ohms
• Reference readout provides determination of fault location

• Easily locates underground cables and pipes
• Large mapping display shows the utility’s estimated position, direction and depth
• Omni directional antennas capture complete signal field for greater speed and accuracy

• Used for enerzing a metallic pipe or line for tracing with a locator
• Delivers up to 5 watts of power
• Can transmit two frequencies simultaneously

• LCD display provides instant visual feedback about line resistance, impedance, and current flow keeping circuit information easy to read while underground wire locating
• Extended range 25-foot (7,62 meter) terminal leads can attach using the heavy duty clips or built-in magnets and have built-in edge to scrape paint for optimal connection to pipe, ground or connection point
• Generates frequencies: Direct Connect – 128 Hz, 1 kHz, 8 kHz, 33 kHz, 93 kHz; Induction – 1 kHz, 8 kHz, 33 kHz, 262 kHz* – Competitor frequencies available in both direct connect and induction

This product has been discontinued by the manufacturer.

• Trace any frequency from 10 Hz to 490 kHz.
• Trace energized lines and sondes (beacons) simultaneously.
• Has all the ease of use and accuracy of the SR-20 but with ALL locatable frequencies.

• Omnidirectional Antennas – capture the complete signal field for greater speed and accuracy
• Built-In GPS – track location coordinates for mapping and GIS applications
• Bluetooth Technology – stream data to smartphones, tablets, or high-precision GPS instruments

• Induces more current so you can walk and trace at great distances
• Customize transmitted frequencies by selecting from a broad range
• Choose from 3 different power options for the 1 that best fits your application

• Superior Performance with improved transmission system
• The all-new OcuSync Enterprise enables transmission up to 15 km away and supports triple-channel 1080p video
• Real-time auto-switching between 2.4 GHz and 5.8 GHz enables more reliable flight near high-interference environments, while AES-256 encryption offers secure data transmission

• A balance of power and portability delivers higher operational efficiency
• With IP55 protection, the M30 can easily handle adverse weather and temperatures ranging from -20° C～50° C
• Dual-vision and ToF sensors appear on all six sides of the aircraft, keeping it and your mission safe

• Streamlined and compact, Mavic 3 Enterprise Series can be carried in one hand and deployed at a moment’s notice. Perfect for beginner and veteran pilots alike, it’s built to perform on lengthy missions
• Mavic 3E’s wide-angle 4/3 CMOS, 20MP sensor has a mechanical shutter to prevent motion blur and supports rapid 0.7-second interval shooting

• Streamlined and compact, Mavic 3 Enterprise Series can be carried in one hand and deployed at a moment’s notice. Perfect for beginner and veteran pilots alike, it’s built to perform on lengthy missions
• Mavic 3E’s wide-angle 4/3 CMOS, 20MP sensor has a mechanical shutter to prevent motion blur and supports rapid 0.7-second interval shooting

• Supports hot-swap function allowing battery change without powering off the drone
• The battery allows Matrice 300 RTK to fly 55 minutes without load
• Two batteries are required per flight

• The zoom and wide-angle cameras are equipped with starlight sensors that are tailor-made for low-light environments.
• Two thermal cameras respectively provide 2× and 8× zoom, together enabling up to 32× zoom. Find hotspots and inspect in close detail after zoom-in.

• Includes a full-frame, low-noise high-sensitivity sensor that can take a photo every 0.7 s during the flight
• Equipped with a global mechanical shutter and the all-new TimeSync 2.0 system, which synchronizes time across modules at the microsecond level

• Integrates a Lidar module, an RGB camera, and a high-accuracy IMU
• Generate true-color point cloud models in real-time, or acquire 2 sq.km of point cloud data in a single flight using the Livox frame Lidar module with a 70° FOV and a visible light camera with a 1-inch sensor

• A new integrated user interface lets you quickly switch between wide, zoom, and thermal camera views, and preview the zoom FOV while in wide or thermal camera view.
• Onboard AI recognizes the pre-marked subject of interest in subsequent automated missions to ensure consistent framing.

• A new integrated user interface lets you quickly switch between wide and zoom camera views, and preview the zoom FOV while in wide view.
• Onboard AI recognizes the pre-marked subject of interest in subsequent automated missions to ensure consistent framing.

• The BS60 battery station can be used to charge, store, and transport batteries
• It can charge four drone batteries and four controller batteries at a time

• Fully supports GPS, GLONASS, Beidou, and GALILEO signals.
• Provides real-time differential data for drones to achieve centimeter-level positioning accuracy
• Built-in high-gain antenna offers better signal reception from more satellites even with obstructions

• A tripod for the D-RTK 2 High Precision GNSS Mobile Station.

• The TB30 Intelligent Battery can be self-heated and charged up to 400 cycles
• Supports Hot Module Replacement, saving time during critical tasks and ensuring smooth flight operations

• DJI Mavic 3 Enterprise Series RTK Module is compatible with DJI Mavic 3 Enterprise Series aircraft
• It provides centimeter-level precision positioning when used with the Network RTK service, Custom Network RTK service, or D-RTK 2 Mobile Station

• Compatible with DJI Mavic 3 Enterprise Series aircraft

• Induces a signal onto a cable or pipe less than 119 mm (4.7 in) in diameter
• Compatible with all RIDGID SeekTech line transmitters, including the ST-305, ST-305R, ST-33Q+, and ST-510

• Bluetooth® Compatibility – Bluetooth® Low Energy technology streams data to smartphones, tablets or high-precision GPS instruments.
• Integrated Battery Adaptor – Equipped with a SeekTech Battery Adaptor for your RIDGID 18V Lithium Ion battery (battery purchased separately).
• Delineation – Intuitive mapping display shows concealed utilities estimated position, direction, and depth.