• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • GROZ CRP/250-16 - Concrete Point Chisel 10in X 5/8in
    GROZ CRP/300-19 - Concrete Point Chisel 12in X 3/4in
    GROZ CHS/ST/6/1-2 - Cold Flat Chisel 6in X 1/2in Blade
    GROZ CHS/ST/8/3-4 - Cold Flat Chisel 8in X 3/4in Blade
    GROZ CHS/ST/10/3-4 - Cold Flat Chisel 10in X 3/4in Blade
    GROZ CHS/ST/12/3-4 - Cold Flat Chisel 12in X 3/4in Blade
    GROZ CHS/ST/12/0-1 - Cold Flat Chisel 12in X 1in Blade
    GROZ CHS/ST/10/3-4/GRP - Cold Flat Chisel W/Grip  10in X 3/4in
    GROZ CHS/ST/12/0-1/GRP - Cold Flat Chisel W/Grip  12in X 1in
    GROZ CHS/ST/18/3-4/GRP - Cold Flat Chisel W/Grip 18in X 3/4in
    GROZ CHS/ST/6/ST - Cold Flat Chisel Set 6-Pc
    GROZ CP/5-32 - Centre Punch Round Head 4mm X 100mm
    GROZ CP/1-4 - Centre Punch Round Head 6mm X 125mm
    GROZ CP/5/ST - Centre Punch Set 5pcs; 1/6in to 5/32in
    GROZ CP/HD/ST-5 - H. Duty Centre Punch Set  5-Pcs;  5/64in to 3/8in
    GROZ ACP/1/B - Automatic Centre Punch 1/2in
    GROZ KIT/14/ST - Punch & Chisel Kit 14pcs
    GROZ KIT/24/ST - Punch & Chisel Kit 24pcs
    GROZ KIT/26/ST - Punch & Chisel Set 26pc
    GROZ HPL/10-ST - Hollow Punch Set 10-Pc
    GROZ HPL/14-ST - Hollow Punch Set 14-Pc
    GROZ PPR/6/ST - Pin Punch Set 6-Pc
    GROZ PP/HD/6/ST - H. Duty Pin Punch Set 6-Pc
    GROZ LP/10 - Letter Punch  3/8in / 10mm
    GROZ LP/12 - Letter Punch 1/2in / 12mm
    GROZ LP/5 - Letter Punch 3/16in / 5mm
    GROZ LP/6 - Letter Punch 1/4in / 6mm
    GROZ LP/8 - Letter Punch 5/16in / 8mm
    GROZ NP/10 - Number Punch 3/8in / 10mm
    GROZ NP/12 - Number Punch 1/2in / 12mm
    GROZ NP/5 - Number Punch 3/16in / 5mm
    GROZ NP/6 - Number Punch 1/4in / 6mm
    GROZ NP/8 - Number Punch 5/16in /  8mm
    GROZ SHID/6/30 - Sledge Hammer 6lb / 30in handle length
    GROZ SHID/8/30 - Sledge Hammer 8lb / 30in handle length
    GROZ SHID/12/30 - Sledge Hammer 12lb / 30in handle length
    GROZ SHID/14/30 - Sledge Hammer 14lb / 30in handle length
    GROZ CHID/2.5/12 - Club Hammer 2.5lb / 12in handle length
    GROZ CHID/4/12 - Club Hammer 4lb / 12in handle length
    GROZ BPID/24/14 - Ball Pein Hammer 24oz / 14in handle length
    GROZ BPID/32/14 - Ball Pein Hammer 32oz / 14in handle length
    GROZ CHID/4/12/CU - Copper Club Hammer 4lb / 12in handle length
    GROZ SHID/8/24/CU - Copper Sledge Hammer 8lb / 24in handle
    GROZ PRY/4-ST - Roll Head Pry Bar Set 4pcs
    GROZ WB/01 - Wrecking Bar 18in
    GROZ WB/03 - Wrecking Bar 24in
    GROZ WB/06 - Wrecking Bar 40in
    RIDGID 52495 - Sledge Hammer 2.5lb
      RIDGID - Sledge Hammer 2.5lb Catalog # 52495

     
    • High-quality steel head delivers powerful strikes
    • Individual sections are tempered steel for strength, hardness and resiliency
    • Wood handle is made from select grain burnished hickory
    EXPERT E150101 - Din Hammer 25mm
      EXPERT - Din Hammer 25mm Model # E150101

     
    • Head hardness 50-58 HRC.
    • Ash handle.
    • Conical wedging.
    EXPERT E150102 - Din Hammer 30mm
      EXPERT - Din Hammer 30mm Model # E150102

     
    • Head hardness 50-58 HRC.
    • Ash handle.
    • Conical wedging.
    EXPERT E150103 - Din Hammer 50mm
      EXPERT - Din Hammer 50mm Model # E150103

     
    • Head hardness 50-58 HRC.
    • Ash handle.
    • Conical wedging.
    EXPERT E150104 - Din Hammer 80mm
      EXPERT - Din Hammer 80mm Model # E150104

     
    • Head hardness 50-58 HRC.
    • Ash handle.
    • Conical wedging.
    EXPERT E150105 - Din Hammer 100mm
      EXPERT - Din Hammer 100mm Model # E150105

     
    • Head hardness 50-58 HRC.
    • Ash handle.
    • Conical wedging.
    EXPERT E150106 - Ball Pein Hammer 1/4lb
      EXPERT - Ball Pein Hammer 1/4lb Model # E150106

     
    • Head hardness 50-58 HRC.
    • Hickory handle.
    • Metal wedge and wood wedge.
    EXPERT E150107 - Ball Pein Hammer 1/2lb
      EXPERT - Ball Pein Hammer 1/2lb Model # E150107

     
    • Head hardness 50-58 HRC.
    • Hickory handle.
    • Metal wedge and wood wedge.
    EXPERT E150108 - Ball Pein Hammer 1lb
      EXPERT - Ball Pein Hammer 1lb Model # E150108

     
    • Head hardness 50-58 HRC.
    • Hickory handle.
    • Metal wedge and wood wedge.
    EXPERT E150109 - Ball Pein Hammer 1-1/2lb
      EXPERT - Ball Pein Hammer 1-1/2lb Model # E150109

     
    • Head hardness 50-58 HRC.
    • Hickory handle.
    • Metal wedge and wood wedge.
    EXPERT E150110 - Ball Pein Hammer 2lb
      EXPERT - Ball Pein Hammer 2lb Model # E150110

     
    • Head hardness 50-58 HRC.
    • Hickory handle.
    • Metal wedge and wood wedge.
    EXPERT E150111 - Club Hammer 1000G
      EXPERT - Club Hammer 1000G Model # E150111

     
    • Head hardness 50-58 HRC.
    • Ash handle.
    • Conical wedging
    EXPERT E150112 - Club Hammer 1250G
      EXPERT - Club Hammer 1250G Model # E150112

     
    • Head hardness 50-58 HRC.
    • Ash handle.
    • Conical wedging
    EXPERT E150113 - Club Hammer 1500G
      EXPERT - Club Hammer 1500G Model # E150113

     
    • Head hardness 50-58 HRC.
    • Ash handle.
    • Conical wedging
    EXPERT E150114 - Club Hammer 2000G
      EXPERT - Club Hammer 2000G Model # E150114

     
    • Head hardness 50-58 HRC.
    • Ash handle.
    • Conical wedging
    EXPERT E150115 - Dead Blow Hammer 500G
      EXPERT - Dead Blow Hammer 500G Model # E150115

     
    • Steel balls enable dead-blow action.
    • Head hardness shore A80-90.
    • Fixed handle: one-piece.
    EXPERT E150116 - Dead Blow Hammer 1000G
      EXPERT - Dead Blow Hammer 1000G Model # E150116

     
    • Steel balls enable dead-blow action.
    • Head hardness shore A80-90.
    • Fixed handle: one-piece.
    EXPERT E150301 - Face Mallet 27mm
      EXPERT - Face Mallet 27mm Model # E150301

     
    • Head in zinc-plated steel alloy.
    • Wood handle.
    • 2 Nylon tips.
    EXPERT E150302 - Face Mallet 32mm
      EXPERT - Face Mallet 32mm Model # E150302

     
    • Head in zinc-plated steel alloy.
    • Wood handle.
    • 2 Nylon tips.
    EXPERT E150303 - Face  Mallet 40mm
      EXPERT - Face Mallet 40mm Model # E150303

     
    • Head in zinc-plated steel alloy.
    • Wood handle.
    • 2 Nylon tips.
    EXPERT E150304 - Face  Mallet 50mm
      EXPERT - Face Mallet 50mm Model # E150304

     
    • Head in zinc-plated steel alloy.
    • Wood handle.
    • 2 Nylon tips.
    EXPERT E150305 - Nylon Tip 27mm (per Pcs)
      EXPERT - Nylon Tip 27mm (per Pcs) Model # E150305

     
    • Nylon tips hardness shore D66-85.
    • Easily changeable.
    EXPERT E150306 - Nylon Tip 32mm (per Pcs)
      EXPERT - Nylon Tip 32mm (per Pcs) Model # E150306

     
    • Nylon tips hardness shore D66-85.
    • Easily changeable.
    EXPERT E150307 - Nylon Tip 40mm (per Pcs)
      EXPERT - Nylon Tip 40mm (per Pcs) Model # E150307

     
    • Nylon tips hardness shore D66-85.
    • Easily changeable.
    EXPERT E150308 - Nylon Tip 50mm (per Pcs)
      EXPERT - Nylon Tip 50mm (per Pcs) Model # E150308

     
    • Nylon tips hardness shore D66-85.
    • Easily changeable.
    EXPERT E150501 - Center Punch 2.5mm
      EXPERT - Center Punch 2.5mm Model # E150501

     
    • Hardness 34-44 for the impact zone and 50-58 for the tip.
    • One-piece for enhanced strength and durability.
    EXPERT E150502 - Center Punch 4mm
      EXPERT - Center Punch 4mm Model # E150502

     
    • Hardness 34-44 for the impact zone and 50-58 for the tip.
    • One-piece for enhanced strength and durability.
    EXPERT E150503 - Automatic Center Punch 4mm
      EXPERT - Automatic Center Punch 4mm Model # E150503

     
    • Hardness 56-61 for the tip.
    • Trigger load E150503: 6 to 12.5 kg – E150504: 12.2 to 18.5 kg.
    • Bronze shaft
    EXPERT E150504 - Automatic Center Punch 7mm
      EXPERT - Automatic Center Punch 7mm Model # E150504

     
    • Hardness 56-61 for the tip.
    • Trigger load E150503: 6 to 12.5 kg – E150504: 12.2 to 18.5 kg.
    • Bronze shaft
    EXPERT E150701 - Extra Flat Slim-Profile Chisel  26mm
      EXPERT - Extra Flat Slim-Profile Chisel 26mm Model # E150701

     
    • DIN 7255
    • Treated for 54-58 HRC on cutting edge.
    EXPERT E150702 - Constant Profile Flat Chisel 21mm
      EXPERT - Constant Profile Flat Chisel 21mm Model # E150702

     
    • DIN 7255
    • Treated for 54-58 HRC on cutting edge.
    EXPERT E150703 - Constant Profile Flat Chisel 24mm
      EXPERT - Constant Profile Flat Chisel 24mm Model # E150703

     
    • DIN 7255
    • Treated for 54-58 HRC on cutting edge.
    EXPERT E150704 - Constant Profile Flat Chisel 27mm
      EXPERT - Constant Profile Flat Chisel 27mm Model # E150704

     
    • DIN 7255
    • Treated for 54-58 HRC on cutting edge.
    EXPERT E151002 - Copper Hammer 24Oz
      EXPERT - Copper Hammer 24Oz Model # E151002

     
    • Wood handle.
    • Heads in copper and rolled leather.
    EXPERT E151004 - Copper Hammer 56Oz
      EXPERT - Copper Hammer 56Oz Model # E151004

     
    • Wood handle.
    • Heads in copper and rolled leather.
    EXPERT E154665 - Engineers Hammer 25mm
      EXPERT - Engineers Hammer 25mm Model # E154665

     
    • Head hardness 50-58 HRC.
    • Handle-blade connected by clasp.
    • Hickory handle.
    EXPERT E154667 - Engineers Hammer 30mm
      EXPERT - Engineers Hammer 30mm Model # E154667

     
    • Handle-blade connected by clasp.
    • Hickory handle.
    • Domed head.
    EXPERT E154668 - Engineers Hammer 32mm
      EXPERT - Engineers Hammer 32mm Model # E154668

     
    • Handle-blade connected by clasp.
    • Hickory handle.
    • Domed head.
    EXPERT E154669 - Engineers Hammer 35mm
      EXPERT - Engineers Hammer 35mm Model # E154669

     
    • Handle-blade connected by clasp.
    • Hickory handle.
    • Domed head.
    EXPERT E154670 - Engineers Hammer 40mm
      EXPERT - Engineers Hammer 40mm Model # E154670

     
    • Head hardness 50-58 HRC.
    • Handle-blade connected by clasp.
    • Hickory handle.
    EXPERT E154672 - Engineers Hammer 45mm
      EXPERT - Engineers Hammer 45mm Model # E154672

     
    • Head hardness 50-58 HRC.
    • Handle-blade connected by clasp.
    • Hickory handle.
    EXPERT E154673 - Engineers Hammer 50mm
      EXPERT - Engineers Hammer 50mm Model # E154673

     
    • Head hardness 50-58 HRC.
    • Handle-blade connected by clasp.
    • Hickory handle.
    EXPERT E154674 - Engineers Hammer 55mm
      EXPERT - Engineers Hammer 55mm Model # E154674

     
    • Head hardness 50-58 HRC.
    • Handle-blade connected by clasp.
    • Hickory handle.
    EXPERT E418226 - Drift Punches Set 6 Pcs
      EXPERT - Drift Punches Set 6 Pcs Model # E418226

     
    • DIN 6450
    • 6 drift punches 2 to 8 mm.
    EXPERT E418227 - Center Punch 6mm
      EXPERT - Center Punch 6mm Model # E418227

     
    • Hardness 34-44 for the impact zone and 50-58 for the tip.
    • One-piece for enhanced strength and durability.
    EXPERT E418228 - Center Punch 8mm
      EXPERT - Center Punch 8mm Model # E418228

     
    • Hardness 34-44 for the impact zone and 50-58 for the tip.
    • One-piece for enhanced strength and durability.
    EXPERT E418230 - Drift Punch 2mm
      EXPERT - Drift Punch 2mm Model # E418230

     
    • Hardness 48-56 HRc for 2 to 4 mm diameter; and 50-58 HRc for 5 to 8 mm diameter.
    • One-piece for enhanced strength and durability.
    EXPERT E418231 - Drift Punch 3mm
      EXPERT - Drift Punch 3mm Model # E418231

     
    • Hardness 48-56 HRc for 2 to 4 mm diameter; and 50-58 HRc for 5 to 8 mm diameter.
    • One-piece for enhanced strength and durability.
    EXPERT E418232 - Drift Punch 4mm
      EXPERT - Drift Punch 4mm Model # E418232

     
    • Hardness 48-56 HRc for 2 to 4 mm diameter; and 50-58 HRc for 5 to 8 mm diameter.
    • One-piece for enhanced strength and durability.
    EXPERT E418233 - Drift Punch 5mm
      EXPERT - Drift Punch 5mm Model # E418233

     
    • Hardness 48-56 HRc for 2 to 4 mm diameter; and 50-58 HRc for 5 to 8 mm diameter.
    • One-piece for enhanced strength and durability.
    EXPERT E418234 - Drift Punch 6mm
      EXPERT - Drift Punch 6mm Model # E418234

     
    • Hardness 48-56 HRc for 2 to 4 mm diameter; and 50-58 HRc for 5 to 8 mm diameter.
    • One-piece for enhanced strength and durability.
    EXPERT E418235 - Drift Punch  8mm
      EXPERT - Drift Punch 8mm Model # E418235

     
    • Hardness 48-56 HRc for 2 to 4 mm diameter; and 50-58 HRc for 5 to 8 mm diameter.
    • One-piece for enhanced strength and durability.
    EXPERT E418236 - Center Punch 10mm
      EXPERT - Center Punch 10mm Model # E418236

     
    • Hardness 34-44 for the impact zone and 50-58 for the tip.
    • One-piece for enhanced strength and durability.
    GROZ CLID/16/13 - Claw Hammer 16lb / 13in / 330mm
    GROZ H-BP16 - Ball Pein Hammer 16 oz
    GROZ H-BP24 - Ball Pein Hammer 24 oz
    GROZ H-BP32 - Ball Pein Hammer 32 oz
    GROZ H-CH08 - Claw Hammer 8 oz
    GROZ H-CH12 - Claw Hammer 12 oz
    GROZ H-CF16 - Claw Hammer 16 oz
    GROZ H-DP25F - Double Plastic Hammer 25 mm
    GROZ H-DP30F - Double Plastic Hammer 30 mm
    GROZ H-DP35F - Double Plastic Hammer 35 mm
    GROZ H-DP40F - Double Plastic Hammer 40 mm
    GROZ H-DP50F - Double Plastic Hammer 50 mm

    Provide us your contact details one of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







    *Demonstrations can only be scheduled within the UAE