• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • 1

    Power Tools Accessories

    Shop our selection of Power Tools Accessories from our retail outlets across dubai & UAE - AABTools



    Categories

    DeWALT DT10300-QZ - Extreme Framing Circular Saw Blade 24T (Corded)
      DeWALT - Extreme Framing Circular Saw Blade 24T (Corded) Model # DT10300-QZ

     
    • For use in corded Circular saws
    • Ripping and cross-cutting natural timbers.
    • Cutting composite wood based sheet materials e.g. plywood; mdf and chipboard etc.
    • Not recommended for timbers that may contain nails.
    DeWALT DT10303-QZ - Extreme Framing Circular Saw Blade 40T(Corded)
      DeWALT - Extreme Framing Circular Saw Blade 40T(Corded) Model # DT10303-QZ

     
    • For use in corded Circular saws
    • Ripping and cross-cutting natural timbers.
    • Cutting composite wood based sheet materials e.g. plywood; mdf and chipboard etc.
    • Not recommended for timbers that may contain nails.
    DeWALT DT10304-QZ - Extreme Framing Circular Saw Blade 24T(Corded)
      DeWALT - Extreme Framing Circular Saw Blade 24T(Corded) Model # DT10304-QZ

     
    • For use in corded Circular saws
    • Ripping and cross-cutting natural timbers.
    • Cutting composite wood based sheet materials e.g. plywood; mdf and chipboard etc.
    • Not recommended for timbers that may contain nails.
    DeWALT DT10624-QZ - Extreme Framing Circular Saw Blade 24T (Cordless)
      DeWALT - Extreme Framing Circular Saw Blade 24T (Cordless) Model # DT10624-QZ

     
    • For use in cordless Circular saws
    • Ripping and cross-cutting natural timbers.
    • Cutting composite wood based sheet materials e.g. plywood; mdf and chipboard etc.
    • Not recommended for timbers that may contain nails.
    DeWALT DT10640-QZ - Extreme Framing Circular Saw Blade 40T (Cordless)
      DeWALT - Extreme Framing Circular Saw Blade 40T (Cordless) Model # DT10640-QZ

     
    • For use in cordless Circular saws
    • Ripping and cross-cutting natural timbers.
    • Cutting composite wood based sheet materials e.g. plywood; mdf and chipboard etc.
    • Not recommended for timbers that may contain nails.
    DeWALT DT1152-QZ - Circular Saw Blade 190mm x 30 x 18t
      DeWALT - Circular Saw Blade 190mm x 30 x 18t Model # DT1152-QZ

     

    For use in portable Circular Saws

    DeWALT DT1153-QZ - Construction Circular Saw Blade 190mm x 30 x 40T
      DeWALT - Construction Circular Saw Blade 190mm x 30 x 40T Model # DT1153-QZ

     

    For use in portable Circular Saws

    DeWALT DT1154-QZ - Circular Saw Blade 216mm x 30 x 24t
      DeWALT - Circular Saw Blade 216mm x 30 x 24t Model # DT1154-QZ

     

    For use in Stationary circular saws

    DeWALT DT1159-QZ - Construction Circular Saw Blade 250mm x 30 x 48t
      DeWALT - Construction Circular Saw Blade 250mm x 30 x 48t Model # DT1159-QZ

     

    For use in Stationary circular saws

    DeWALT DT1160-QZ - Construction Circular Saw Blade 305mm x 30 x 24t
      DeWALT - Construction Circular Saw Blade 305mm x 30 x 24t Model # DT1160-QZ

     

    For use in Stationary circular saws

    DeWALT DT1161-QZ - Circular Saw Blade 305mm x 30 x 40t
      DeWALT - Circular Saw Blade 305mm x 30 x 40t Model # DT1161-QZ

     

    For use in Stationary circular saws

    DeWALT DT1162-QZ - Construction Circular Saw Blade 305mm x 30 x 60T
      DeWALT - Construction Circular Saw Blade 305mm x 30 x 60T Model # DT1162-QZ

     

    For use in Stationary circular saws

    DeWALT DT1163-QZ - Table Saw Blade 315mm x 30mm x 24T
      DeWALT - Table Saw Blade 315mm x 30mm x 24T Model # DT1163-QZ

     

    For use in Stationary circular saws

    DeWALT DT1938-QZ - Circular Saw Blade – Dia 190 Bore 16 ATB 20DEG 18T
      DeWALT - Circular Saw Blade – Dia 190 Bore 16 ATB 20DEG 18T Model # DT1938-QZ

     

    Circular Saw Blade 184mm x 16mm x 18T Construction Blade for rough timber and cutting through embedded nails, the ultra sharp carbide teeth on the DT1938 DeWALT Blade allows the trade to use less force required when pushing the blade through the timber when cutting

    DeWALT DT1940-QZ - Circular Saw Blade – Dia 184 Bore 16 ATB 10DEG 30T
    DeWALT DT1941-QZ - Circular Saw Blade – Dia 184 Bore 30 ATB 20DEG 18T
    DeWALT DT1942-QZ - Circular Saw Blade – Dia 184 Bore 30 ATB 10DEG 30T
    DeWALT DT1954-QZ - Circular Saw Blade – Dia:235 Bore 30mm 24T
    DeWALT DT1955-QZ - Circular Saw Blade – Dia 235 Bore 30 ATB 10DEG 40T
    DeWALT DT1959-QZ - Circular Saw Blade – Dia:305 Bore 30mm 48T
    DeWALT DT1960-QZ - Circular Saw Blade – Dia:305 Bore 30mm 60T
    DeWALT DT2049-QZ - 100mm HCS Wood Cutting Jigsaw Blade
      DeWALT - 100mm HCS Wood Cutting Jigsaw Blade Model # DT2049-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2050-QZ - 76mm HCS Wood Cutting Jigsaw Blades
      DeWALT - 76mm HCS Wood Cutting Jigsaw Blades Model # DT2050-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2053-QZ - Jigsaw Blades for Wood HSC T Shank
      DeWALT - Jigsaw Blades for Wood HSC T Shank Model # DT2053-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2054-QZ - Metal Jigsaw Blade PK5 T118EOF
    DeWALT DT2056-QZ - TC Tipped Bi-Metal Jigsaw Blade for Fibreglass
      DeWALT - TC Tipped Bi-Metal Jigsaw Blade for Fibreglass Model # DT2056-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2084-QZ - 180mm Long Life Bi-Metal Jigsaw Blades
      DeWALT - 180mm Long Life Bi-Metal Jigsaw Blades Model # DT2084-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2085-QZ - 132mm HSS Metal Cutting Jigsaw Blades
      DeWALT - 132mm HSS Metal Cutting Jigsaw Blades Model # DT2085-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2101-QZ - Inox TCT Metal Cutting Jigsaw Blade
      DeWALT - Inox TCT Metal Cutting Jigsaw Blade Model # DT2101-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2154-QZ - Metal Jigsaw Blade PK3; 2-6mm; M-Cutting T118BF
    DeWALT DT2160-QZ - Jigsaw Blades for Metal T Shank – HSS
      DeWALT - Jigsaw Blades for Metal T Shank – HSS Model # DT2160-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2161-QZ - HSS T Shank Jigsaw Blades for Metal
    DeWALT DT2162-QZ - HSS T Shank Jigsaw Blades for Metal
    DeWALT DT2163-QZ - HSS T Shank Jigsaw Blades for Metal
      DeWALT - HSS T Shank Jigsaw Blades for Metal Model # DT2163-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2164-QZ - HCS Jigsaw Blades for Wood
      DeWALT - HCS Jigsaw Blades for Wood Model # DT2164-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2165-QZ - HCS T Shank Jigsaw Blades
      DeWALT - HCS T Shank Jigsaw Blades Model # DT2165-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2166-QZ - Jigsaw Blades for Wood T Shank – HCS
    DeWALT DT2167-QZ - HCS Wood Cutting Blade
      DeWALT - HCS Wood Cutting Blade Model # DT2167-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2168-QZ - HCS T Shank Scroller Jigsaw Blades
      DeWALT - HCS T Shank Scroller Jigsaw Blades Model # DT2168-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2169-QZ - Jigsaw Blades for Wood T Shank – HCS
      DeWALT - Jigsaw Blades for Wood T Shank – HCS Model # DT2169-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2185-QZ - HCS Wood Cutting Blade (Pack of 100Pcs)
      DeWALT - HCS Wood Cutting Blade (Pack of 100Pcs) Model # DT2185-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2290-QZ - Wood-Cutting Jigsaw Blades Set 10Pcs
      DeWALT - Wood-Cutting Jigsaw Blades Set 10Pcs Model # DT2290-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2292-QZ - Metal-Cutting Jigsaw Blades Set 10Pcs
      DeWALT - Metal-Cutting Jigsaw Blades Set 10Pcs Model # DT2292-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2294-QZ - Wood/Metal Jigsaw Blade Set 10Pcs
      DeWALT - Wood/Metal Jigsaw Blade Set 10Pcs Model # DT2294-QZ

     

    For use with a Heavy duty top handle or body grip Jigsaw

    DeWALT DT2348-QZ - Reciprocating Bi Metal Blades 152mm
      DeWALT - Reciprocating Bi Metal Blades 152mm Model # DT2348-QZ

     

    For use with Reciprocating Saws

    DeWALT DT2349-QZ - Reciprocating Bi Metal Blades 228mm
      DeWALT - Reciprocating Bi Metal Blades 228mm Model # DT2349-QZ

     

    For use with Reciprocating Saws

    DeWALT DT2350-QZ - Reciprocating Blades –  Bi Metal 305mm
      DeWALT - Reciprocating Blades – Bi Metal 305mm Model # DT2350-QZ

     

    For use with Reciprocating Saws

    DeWALT DT2353-QZ - Reciprocating Blades – Bi Metal  for Fast Cutting 203mm
    DeWALT DT2354-QZ - Reciprocating Blades – Bi Metal 203mm
      DeWALT - Reciprocating Blades – Bi Metal 203mm Model # DT2354-QZ

     

    For use with Reciprocating Saws

    DeWALT DT2355-QZ - Reciprocating Blades – Bi Metal 305mm
      DeWALT - Reciprocating Blades – Bi Metal 305mm Model # DT2355-QZ

     

    For use with Reciprocating Saws

    DeWALT DT2359-QZ - Reciprocating Blades- Bi Metal  152mm
      DeWALT - Reciprocating Blades- Bi Metal 152mm Model # DT2359-QZ

     

    For use with Reciprocating Saws

    DeWALT DT2361-QZ - Reciprocating Blades – Bi Metal for fast cutting 152mm (Pack of 5Pcs)
    DeWALT DT2384-QZ - Reciprocating Blades – Bi Metal 152mm (Pack of 5Pcs)
    DeWALT DT2385-QZ - Reciprocating Blades – Bi Metal 152mm (Pack of 5Pcs)
      DeWALT - Reciprocating Blades – Bi Metal 152mm (Pack of 5Pcs) Model # DT2385-QZ

     

    For use with Reciprocating Saws

    DeWALT DT2387-QZ - Reciprocating Blades –  Bi Metal 203mm
      DeWALT - Reciprocating Blades – Bi Metal 203mm Model # DT2387-QZ

     

    For use with Reciprocating Saws

    DeWALT DT3452-QZ - Twist knot wire wheel brushes D150
      DeWALT - Twist knot wire wheel brushes D150 Model # DT3452-QZ

     
    • Aggressive twist knot wire wheel and cup brushes are used for heavy duty cleaning work; derusting and deburring
    • Has Highly specified wire grades for optimum material removal
    • Has High wire content for extra brush durability
    DeWALT DT3500-QZ - Twist knot wire cup brushes D65
      DeWALT - Twist knot wire cup brushes D65 Model # DT3500-QZ

     
    • Aggressive twist knot wire wheel and cup brushes are used for heavy duty cleaning work; derusting and deburring
    • Has Highly specified wire grades for optimum material removal
    • Has High wire content for extra brush durability
    DeWALT DT3502-QZ - Twist knot wire wheel brushes  D115
      DeWALT - Twist knot wire wheel brushes D115 Model # DT3502-QZ

     
    • Aggressive twist knot wire wheel and cup brushes are used for heavy duty cleaning work; derusting and deburring
    • Have Highly specified wire grades for optimum material removal
    • High wire content for extra brush durability
    DeWALT DT3600-QZ - Velcro Backing Pad 125mm
      DeWALT - Velcro Backing Pad 125mm Model # DT3600-QZ

     
    • Quick Fit replacement platens for DEWALT Random
    • Orbit Sanders. Hardness grade – medium.
    DeWALT DT3601-QZ - Velcro Backing Pad 150mm
      DeWALT - Velcro Backing Pad 150mm Model # DT3601-QZ

     
    • Quick Fit replacement platens for DEWALT Random
    • Orbit Sanders. Hardness grade – medium.
    DeWALT DT3610-QZ - Backing Pad For Angle Grinder 115mm M14 Bore
      DeWALT - Backing Pad For Angle Grinder 115mm M14 Bore Model # DT3610-QZ

     
    • For use with angle grinder fibre
      discs and polishing bonnets.
    • Thermoplastic backing pad supplied with
      flange locking nut.
    DeWALT DT3611-QZ - Backing Pad For Angle Grinder 125mm M15 Bore
      DeWALT - Backing Pad For Angle Grinder 125mm M15 Bore Model # DT3611-QZ

     
    • For use with angle grinder fibre
      discs and polishing bonnets.
    • Thermoplastic backing pad supplied with
      flange locking nut.
    DeWALT DT3612-QZ - Backing Pad For Angle Grinder 178mm M16 Bore
      DeWALT - Backing Pad For Angle Grinder 178mm M16 Bore Model # DT3612-QZ

     
    • For use with angle grinder fibre
      discs and polishing bonnets.
    • Thermoplastic backing pad supplied with
      flange locking nut.
    DeWALT DT3620-QZ - Angle grinder polishing bonnet; 115mm
      DeWALT - Angle grinder polishing bonnet; 115mm Model # DT3620-QZ

     
    • High Speed polishing on a wide
      variety of surfaces (e.g.) unpainted
      metals and stone.
    • Has Lambswool pile polishing bonnets.
    DeWALT DT3622-QZ - Angle grinder polishing bonnet; 178mm
    DeWALT DT3905-QZ - HSS Reversible planer blades 82mm x 2
      DeWALT - HSS Reversible planer blades 82mm x 2 Model # DT3905-QZ

     

    For use with DW677;DW678K;DW678EK and DW680K

    DeWALT DT3906-QZ - TCT Reversible Planer Blades 82mm x 2
      DeWALT - TCT Reversible Planer Blades 82mm x 2 Model # DT3906-QZ

     

    For use with DW677;DW678K;DW678EK and DW680K

    DeWALT DT4031-QZ - Circular Saw Blade 184mm x 16mm x 28T
      DeWALT - Circular Saw Blade 184mm x 16mm x 28T Model # DT4031-QZ

     

    For use in portable Circular Saws

    DeWALT DT4036-QZ - Circular Saw Blade 235mm x 30mm x 28T
      DeWALT - Circular Saw Blade 235mm x 30mm x 28T Model # DT4036-QZ

     

    For use in portable Circular Saws

    DeWALT DT4063-QZ - Circular Saw Blade 184mm x 16mm x 40T
      DeWALT - Circular Saw Blade 184mm x 16mm x 40T Model # DT4063-QZ

     

    For use in portable Circular Saws

    DeWALT DT4067-QZ - Circular Saw Blade 235mm x 30mm x 40T
      DeWALT - Circular Saw Blade 235mm x 30mm x 40T Model # DT4067-QZ

     

    For use in portable Circular Saws

    DeWALT DT4087-QZ - Extreme Circular Saw Blade 165mm x 20mm x 48T
      DeWALT - Extreme Circular Saw Blade 165mm x 20mm x 48T Model # DT4087-QZ

     

    For use in portable Circular Saws

    DeWALT DT4092-QZ - Circular Saw Blade 184mm x 16mm x 48T
      DeWALT - Circular Saw Blade 184mm x 16mm x 48T Model # DT4092-QZ

     

    For use in portable Circular Saws

    DeWALT DT4097-QZ - Circular Saw Blade 235mm x 30mm x 56T
      DeWALT - Circular Saw Blade 235mm x 30mm x 56T Model # DT4097-QZ

     

    For use in portable Circular Saws

    DeWALT DT4215-QZ - Circular Saw Blade 315mm x 30mm x 24T
      DeWALT - Circular Saw Blade 315mm x 30mm x 24T Model # DT4215-QZ

     

    For use in Stationary circular saws

    DeWALT DT4281-QZ - Extreme Circular Saw Blade 300mm x 30mm x 80T
    DeWALT DT4282-QZ - Extreme Circular Saw Blade 250mm x 30mm x 80T
      DeWALT - Extreme Circular Saw Blade 250mm x 30mm x 80T Model # DT4282-QZ

     
    • Featuring tungsten carbide teeth for maximum durability and a thin kerf for fast, smooth cuts.
    • DEWALT EXTREME Portable Construction Saw Blades power through a variety of building materials with ease.
    • Ribbed heat vents allow blades to run at cooler temperatures, reducing blade flexing and binding. Anti-stick coating minimizes friction and gum-up.
    DeWALT DT4283-QZ - Extreme Circular Saw Blade 305mm x 30mm x 80T
      DeWALT - Extreme Circular Saw Blade 305mm x 30mm x 80T Model # DT4283-QZ

     
    • Featuring tungsten carbide teeth for maximum durability and a thin kerf for fast, smooth cuts
    • DEWALT EXTREME Portable Construction Saw Blades power through a variety of building materials with ease.
    • Ribbed heat vents allow blades to run at cooler temperatures, reducing blade flexing and binding. Anti-stick coating minimizes friction and gum-up.
    DeWALT DT4287-QZ - Extreme Circular Saw Blade 250mm x 30mm x 80T
    DeWALT c-QZ - Extreme Circular Saw Blade 305 x 30 x 80T
      DeWALT - Extreme Circular Saw Blade 305 x 30 x 80T Model # c-QZ

     

    For use in Stationary circular saws

    DeWALT DT4290-QZ - Extreme Circular Saw Blade 305mm x 30mm x 96T
      DeWALT - Extreme Circular Saw Blade 305mm x 30mm x 96T Model # DT4290-QZ

     
    • Featuring tungsten carbide teeth for maximum durability and a thin kerf for fast, smooth cuts
    • DEWALT EXTREME Portable Construction Saw Blades power through a variety of building materials with ease.
    • Ribbed heat vents allow blades to run at cooler temperatures, reducing blade flexing and binding. Anti-stick coating minimizes friction and gum-up.
    DeWALT DT4291-QZ - Extreme Circular Saw Blade 350mm x 30mm x 96T
      DeWALT - Extreme Circular Saw Blade 350mm x 30mm x 96T Model # DT4291-QZ

     

    For use in Stationary circular saws

    DeWALT DT4327-QZ - Extreme Circular Saw Blade 300 x 30 x 48t
      DeWALT - Extreme Circular Saw Blade 300 x 30 x 48t Model # DT4327-QZ

     

    For use in Stationary circular saws

    DeWALT DT4328-QZ - Extreme Circular Saw Blade 300 x 30 x 60t
      DeWALT - Extreme Circular Saw Blade 300 x 30 x 60t Model # DT4328-QZ

     

    For use in Stationary circular saws

    DeWALT DT4331-QZ - Extreme Circular Saw Blade 305 x 30 x 60t
      DeWALT - Extreme Circular Saw Blade 305 x 30 x 60t Model # DT4331-QZ

     

    For use in Stationary circular saws

    DeWALT DT4332-QZ - Circular Saw Blade 315mm x 30mm x 48T
      DeWALT - Circular Saw Blade 315mm x 30mm x 48T Model # DT4332-QZ

     

    For use in Stationary circular saws

    DeWALT DT4333-QZ - Circular Saw Blade 350mm x 30mm x 42T
      DeWALT - Circular Saw Blade 350mm x 30mm x 42T Model # DT4333-QZ

     

    For use in Stationary circular saws

    DeWALT DT4334-QZ - Circular Saw Blade 350mm x 30mm x 54T
      DeWALT - Circular Saw Blade 350mm x 30mm x 54T Model # DT4334-QZ

     

    For use in Stationary circular saws

    DeWALT DT4338-QZ - Circular Saw Blade 400mm x 30mm x 60T
      DeWALT - Circular Saw Blade 400mm x 30mm x 60T Model # DT4338-QZ

     

    For use in Stationary circular saws

    DeWALT DT4353-QZ - Extreme Circular Saw Blade 250mm x 30mm x 80T
      DeWALT - Extreme Circular Saw Blade 250mm x 30mm x 80T Model # DT4353-QZ

     

    For use in Stationary circular saws

    DeWALT DT4358-QZ - Circular Saw Blade 315mm x 30mm x 72T
      DeWALT - Circular Saw Blade 315mm x 30mm x 72T Model # DT4358-QZ

     

    For use in Stationary circular saws

    DeWALT DT4360-QZ - Circular Saw Blade 350mm x 30mm x 84T
      DeWALT - Circular Saw Blade 350mm x 30mm x 84T Model # DT4360-QZ

     

    For use in Stationary circular saws

    DeWALT DT4600-QZ - Wood Auger Drill Bit; 6mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 6mm X 200mm X 100mm Model # DT4600-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4602-QZ - Wood Auger Drill Bit; 8mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 8mm X 200mm X 100mm Model # DT4602-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4604-QZ - Wood Auger Drill Bit; 10mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 10mm X 200mm X 100mm Model # DT4604-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4606-QZ - Wood Auger Drill Bit; 12mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 12mm X 200mm X 100mm Model # DT4606-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4608-QZ - Wood Auger Drill Bit; 14mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 14mm X 200mm X 100mm Model # DT4608-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4610-QZ - Wood Auger Drill Bit; 16mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 16mm X 200mm X 100mm Model # DT4610-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4612-QZ - Wood Auger Drill Bit; 18mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 18mm X 200mm X 100mm Model # DT4612-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4615-QZ - Wood Auger Drill Bit; 22mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 22mm X 200mm X 100mm Model # DT4615-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4616-QZ - Wood Auger Drill Bit; 24mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 24mm X 200mm X 100mm Model # DT4616-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4618-QZ - Wood Auger Drill Bit; 26mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 26mm X 200mm X 100mm Model # DT4618-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4619-QZ - Wood Auger Drill Bit; 28mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 28mm X 200mm X 100mm Model # DT4619-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4620-QZ - Wood Auger Drill Bit; 30mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 30mm X 200mm X 100mm Model # DT4620-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4621-QZ - Wood Auger Drill Bit; 32mm X 200mm X 100mm
      DeWALT - Wood Auger Drill Bit; 32mm X 200mm X 100mm Model # DT4621-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4632-QZ - Wood Auger Drill Bit; 8mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 8mm X 380mm X 280mm Model # DT4632-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4636-QZ - Wood Auger Drill Bit; 12mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 12mm X 380mm X 280mm Model # DT4636-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4638-QZ - Wood Auger Drill Bit; 14mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 14mm X 380mm X 280mm Model # DT4638-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4640-QZ - Wood Auger Drill Bit; 16mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 16mm X 380mm X 280mm Model # DT4640-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4642-QZ - Wood Auger Drill Bit; 18mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 18mm X 380mm X 280mm Model # DT4642-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4644-QZ - Wood Auger Drill Bit; 20mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 20mm X 380mm X 280mm Model # DT4644-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4645-QZ - Wood Auger Drill Bit; 22mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 22mm X 380mm X 280mm Model # DT4645-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4646-QZ - Wood Auger Drill Bit; 24mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 24mm X 380mm X 280mm Model # DT4646-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4648-QZ - Wood Auger Drill Bit; 26mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 26mm X 380mm X 280mm Model # DT4648-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4649-QZ - Wood Auger Drill Bit; 28mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 28mm X 380mm X 280mm Model # DT4649-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4650-QZ - Wood Auger Drill Bit; 30mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 30mm X 380mm X 280mm Model # DT4650-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4651-QZ - Wood Auger Drill Bit; 32mm X 380mm X 280mm
      DeWALT - Wood Auger Drill Bit; 32mm X 380mm X 280mm Model # DT4651-QZ

     

    Typically used for boring clean precise holes through beams; joists; doors etc.

    DeWALT DT4950-QZ - Mixer Tools; 100mm X 600mm
      DeWALT - Mixer Tools; 100mm X 600mm Model # DT4950-QZ

     

    For wallpaper paste; gloss paint; emulsion; mortar and plaster.

    DeWALT DT4951-QZ - Mixer Tools; 120mm X 600mm
      DeWALT - Mixer Tools; 120mm X 600mm Model # DT4951-QZ

     

    For wallpaper paste; gloss paint; emulsion; mortar and plaster.

    DeWALT DT50465-XJ - HSS-G Drill Bit 1.0mm
      DeWALT - HSS-G Drill Bit 1.0mm Model # DT50465-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50466-XJ - HSS-G Drill Bit 1.5mm
      DeWALT - HSS-G Drill Bit 1.5mm Model # DT50466-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50468-XJ - HSS-G Drill Bit 2.0mm
      DeWALT - HSS-G Drill Bit 2.0mm Model # DT50468-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50469-XJ - HSS-G Drill Bit 2.5mm
      DeWALT - HSS-G Drill Bit 2.5mm Model # DT50469-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50470-XJ - HSS-G Drill Bit 3.0mm
      DeWALT - HSS-G Drill Bit 3.0mm Model # DT50470-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50472-XJ - HSS-G Drill Bit 3.5mm
      DeWALT - HSS-G Drill Bit 3.5mm Model # DT50472-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50473-XJ - HSS-G Drill Bit 4.0mm
      DeWALT - HSS-G Drill Bit 4.0mm Model # DT50473-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50474-XJ - HSS-G Drill Bit 4.5mm
      DeWALT - HSS-G Drill Bit 4.5mm Model # DT50474-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50476-XJ - HSS-G Drill Bit 5.0mm
      DeWALT - HSS-G Drill Bit 5.0mm Model # DT50476-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50477-XJ - HSS-G Drill Bit 5.5mm
      DeWALT - HSS-G Drill Bit 5.5mm Model # DT50477-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50478-XJ - HSS-G Drill Bit 6.0mm
      DeWALT - HSS-G Drill Bit 6.0mm Model # DT50478-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50480-XJ - HSS-G Drill Bit 6.5mm
      DeWALT - HSS-G Drill Bit 6.5mm Model # DT50480-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50481-XJ - HSS-G Drill Bit 7.0mm
      DeWALT - HSS-G Drill Bit 7.0mm Model # DT50481-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50484-XJ - HSS-G Drill Bit 8.0mm
      DeWALT - HSS-G Drill Bit 8.0mm Model # DT50484-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50486-XJ - HSS-G Drill Bit 9.0mm
      DeWALT - HSS-G Drill Bit 9.0mm Model # DT50486-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50488-XJ - HSS-G Drill Bit 10.0mm
      DeWALT - HSS-G Drill Bit 10.0mm Model # DT50488-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50490-XJ - HSS-G Drill Bit 11.0mm
      DeWALT - HSS-G Drill Bit 11.0mm Model # DT50490-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50492-XJ - HSS-G Drill Bit 12.0mm
      DeWALT - HSS-G Drill Bit 12.0mm Model # DT50492-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50494-XJ - HSS-G Drill Bit 13.0mm
      DeWALT - HSS-G Drill Bit 13.0mm Model # DT50494-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50495-XJ - HSS-G Drill Bit 14.0mm
      DeWALT - HSS-G Drill Bit 14.0mm Model # DT50495-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50496-XJ - HSS-G Drill Bit 15.0mm
      DeWALT - HSS-G Drill Bit 15.0mm Model # DT50496-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50497-XJ - HSS-G Drill Bit 16.0mm
      DeWALT - HSS-G Drill Bit 16.0mm Model # DT50497-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50498-XJ - HSS-G Drill Bit 18.0mm
      DeWALT - HSS-G Drill Bit 18.0mm Model # DT50498-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT50499-XJ - HSS-G Drill Bit 20.0mm
      DeWALT - HSS-G Drill Bit 20.0mm Model # DT50499-XJ

     

    Suitable for portable or stationary drilling of high alloy content steels and metals with a tensile strength up to 1100N/mm2 e.g. heat and acid proof steel; cast; iron; bronze; welded seams;
    stainless and chrome nickel steels.

    DeWALT DT5911-QZ - Pack of 10 HSS Jobber Drills in plastic cassette
      DeWALT - Pack of 10 HSS Jobber Drills in plastic cassette Model # DT5911-QZ

     
    • Cylindrical ground right hand cutting helix & 118° point angle. 
    • Diameter tolerance to h8 – Sizes: 1, 2, 3, 4, 5, 6, 7, 8, 9 & 10mm. 
    • Finish – steam tempered black.
    DeWALT DT5912-QZ - Pack of 13 HSS Jobber Drills in plastic cassette
      DeWALT - Pack of 13 HSS Jobber Drills in plastic cassette Model # DT5912-QZ

     
    • Drill Size: 1 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 5(x2), 5.5, 6, 6.5mm
    • Diameter tolerance to h8
    DeWALT DT5913-QZ - Pack of 19 HSS Jobber Drills in metal cassette
      DeWALT - Pack of 19 HSS Jobber Drills in metal cassette Model # DT5913-QZ

     
    • Drill sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 and 10mm.
    • Diameter tolerance to h8
    DeWALT DT5921-QZ - Metal Drill Bit Set 10 Piece
      DeWALT - Metal Drill Bit Set 10 Piece Model # DT5921-QZ

     
    • Diameter: 1; 2; 3; 4; 5; 6; 7; 8; 9; 10 mm
    • Diameter tolerance to h8
    DeWALT DT5923-QZ - Extreme Metal Drill Bit Set 19 Piece
      DeWALT - Extreme Metal Drill Bit Set 19 Piece Model # DT5923-QZ

     
    • Diameters: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 and 10mm
    • Pack Qty: 19
    DeWALT DT5929-QZ - 29 piece HSS Bit Set 1-13mm
      DeWALT - 29 piece HSS Bit Set 1-13mm Model # DT5929-QZ

     
    • Diameters: 1, 1.5, 2, 2.5, 3, 3.2, 3.3, 3.5, 4, 4.2, 4.5, 4.8, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5 and 13mm
    DeWALT DT60200-XJ - SDS-Max Drill Bit  16mm X 340mm X 200mm
      DeWALT - SDS-Max Drill Bit 16mm X 340mm X 200mm Model # DT60200-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60201-XJ - SDS-Max Drill Bit  16mm X 540mm X 400mm
      DeWALT - SDS-Max Drill Bit 16mm X 540mm X 400mm Model # DT60201-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60202-XJ - SDS-Max Drill Bit  18mm X 340mm X 200mm
      DeWALT - SDS-Max Drill Bit 18mm X 340mm X 200mm Model # DT60202-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60203-XJ - SDS-Max Drill Bit  18mm X 540mm X 400mm
      DeWALT - SDS-Max Drill Bit 18mm X 540mm X 400mm Model # DT60203-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60204-XJ - SDS-Max Drill Bit  20mm X 340mm X 200mm
      DeWALT - SDS-Max Drill Bit 20mm X 340mm X 200mm Model # DT60204-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60205-XJ - SDS-Max Drill Bit  20mm X 540mm X 400mm
      DeWALT - SDS-Max Drill Bit 20mm X 540mm X 400mm Model # DT60205-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60206-XJ - SDS-Max Drill Bit  22mm X 340mm X 200mm
      DeWALT - SDS-Max Drill Bit 22mm X 340mm X 200mm Model # DT60206-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60207-XJ - SDS-Max Drill Bit  22mm X 540mm X 400mm
      DeWALT - SDS-Max Drill Bit 22mm X 540mm X 400mm Model # DT60207-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60208-XJ - SDS-Max Drill Bit  24mm X 340mm X 200mm
      DeWALT - SDS-Max Drill Bit 24mm X 340mm X 200mm Model # DT60208-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60209-XJ - SDS-Max Drill Bit  24mm X 540mm X 400mm
      DeWALT - SDS-Max Drill Bit 24mm X 540mm X 400mm Model # DT60209-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60210-XJ - SDS-Max Drill Bit  25mm X 340mm X 200mm
      DeWALT - SDS-Max Drill Bit 25mm X 340mm X 200mm Model # DT60210-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60211-XJ - SDS-Max Drill Bit  25mm X 540mm X 400mm
      DeWALT - SDS-Max Drill Bit 25mm X 540mm X 400mm Model # DT60211-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60212-XJ - SDS-Max Drill Bit  26mm X 340mm X 200mm
      DeWALT - SDS-Max Drill Bit 26mm X 340mm X 200mm Model # DT60212-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60213-XJ - SDS-Max Drill Bit  26mm X 540mm X 400mm
      DeWALT - SDS-Max Drill Bit 26mm X 540mm X 400mm Model # DT60213-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60214-XJ - SDS-Max Drill Bit  28mm X 380mm X 250mm
      DeWALT - SDS-Max Drill Bit 28mm X 380mm X 250mm Model # DT60214-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60215-XJ - SDS-Max Drill Bit  28mm X 570mm X 450mm
      DeWALT - SDS-Max Drill Bit 28mm X 570mm X 450mm Model # DT60215-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60216-XJ - SDS-Max Drill Bit  28mm X 670mm X 550mm
      DeWALT - SDS-Max Drill Bit 28mm X 670mm X 550mm Model # DT60216-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60217-XJ - SDS-Max Drill Bit  30mm X 380mm X 250mm
      DeWALT - SDS-Max Drill Bit 30mm X 380mm X 250mm Model # DT60217-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60218-XJ - SDS-Max Drill Bit  30mm X 570mm X 450mm
      DeWALT - SDS-Max Drill Bit 30mm X 570mm X 450mm Model # DT60218-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60219-XJ - SDS-Max Drill Bit  32mm X 380mm X 250mm
      DeWALT - SDS-Max Drill Bit 32mm X 380mm X 250mm Model # DT60219-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60220-XJ - SDS-Max Drill Bit  32mm X 570mm X 450mm
      DeWALT - SDS-Max Drill Bit 32mm X 570mm X 450mm Model # DT60220-XJ

     

    For use with SDS-Max drive hammer drills for anchor fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60800-QZ - 12mm x 340mm x 200mm SDS max XLR
      DeWALT - 12mm x 340mm x 200mm SDS max XLR Model # DT60800-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60801-QZ - 12mm x 540mm x 400mm SDS max XLR
      DeWALT - 12mm x 540mm x 400mm SDS max XLR Model # DT60801-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60802-QZ - 12mm x 670mm x 550mm SDS max XLR
      DeWALT - 12mm x 670mm x 550mm SDS max XLR Model # DT60802-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60803-QZ - 13mm x 340mm x 200mm SDS max XLR
      DeWALT - 13mm x 340mm x 200mm SDS max XLR Model # DT60803-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60804-QZ - 13mm x 540mm x 400mm SDS max XLR
      DeWALT - 13mm x 540mm x 400mm SDS max XLR Model # DT60804-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60805-QZ - 14mm x 340mm x 200mm SDS max XLR
      DeWALT - 14mm x 340mm x 200mm SDS max XLR Model # DT60805-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60806-QZ - 14mm x 540mm x 400mm SDS max XLR
      DeWALT - 14mm x 540mm x 400mm SDS max XLR Model # DT60806-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60807-QZ - 15mm x 340mm x 200mm SDS max XLR
      DeWALT - 15mm x 340mm x 200mm SDS max XLR Model # DT60807-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60808-QZ - 15mm x 540mm x 400mm SDS max XLR
      DeWALT - 15mm x 540mm x 400mm SDS max XLR Model # DT60808-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60809-QZ - 16mm x 340mm x 200mm SDS max XLR
      DeWALT - 16mm x 340mm x 200mm SDS max XLR Model # DT60809-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60810-QZ - 16mm x 540mm x 400mm SDS max XLR
      DeWALT - 16mm x 540mm x 400mm SDS max XLR Model # DT60810-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60811-QZ - 18mm x 340mm x 200mm SDS max XLR
      DeWALT - 18mm x 340mm x 200mm SDS max XLR Model # DT60811-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60812-QZ - 18mm x 540mm x 400mm SDS max XLR
      DeWALT - 18mm x 540mm x 400mm SDS max XLR Model # DT60812-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60813-QZ - 19mm x 340mm x 200mm SDS max XLR
      DeWALT - 19mm x 340mm x 200mm SDS max XLR Model # DT60813-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60814-QZ - 19mm x 540mm x 400mm SDS max XLR
      DeWALT - 19mm x 540mm x 400mm SDS max XLR Model # DT60814-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60815-QZ - 19mm x 670mm x 550mm SDS max XLR
      DeWALT - 19mm x 670mm x 550mm SDS max XLR Model # DT60815-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60816-QZ - 20mm x 340mm x 200mm SDS max XLR
      DeWALT - 20mm x 340mm x 200mm SDS max XLR Model # DT60816-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60817-QZ - 20mm x 540mm x 400mm SDS max XLR
      DeWALT - 20mm x 540mm x 400mm SDS max XLR Model # DT60817-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60818-QZ - 20mm x 920mm x 800mm SDS max XLR
      DeWALT - 20mm x 920mm x 800mm SDS max XLR Model # DT60818-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60819-QZ - 22mm x 340mm x 200mm SDS max XLR
      DeWALT - 22mm x 340mm x 200mm SDS max XLR Model # DT60819-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60820-QZ - 22mm x 540mm x 400mm SDS max XLR
      DeWALT - 22mm x 540mm x 400mm SDS max XLR Model # DT60820-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60821-QZ - 22mm x 920mm x 800mm SDS max XLR
      DeWALT - 22mm x 920mm x 800mm SDS max XLR Model # DT60821-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60822-QZ - 24mm x 340mm x 200mm SDS max XLR
      DeWALT - 24mm x 340mm x 200mm SDS max XLR Model # DT60822-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60823-QZ - 24mm x 540mm x 400mm SDS max XLR
      DeWALT - 24mm x 540mm x 400mm SDS max XLR Model # DT60823-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60824-QZ - 25mm x 340mm x 200mm SDS max XLR
      DeWALT - 25mm x 340mm x 200mm SDS max XLR Model # DT60824-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60825-QZ - 25mm x 540mm x 400mm SDS max XLR
      DeWALT - 25mm x 540mm x 400mm SDS max XLR Model # DT60825-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60826-QZ - 25mm x 920mm x 800mm SDS max XLR
      DeWALT - 25mm x 920mm x 800mm SDS max XLR Model # DT60826-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60827-QZ - 26mm x 340mm x 200mm SDS max XLR
      DeWALT - 26mm x 340mm x 200mm SDS max XLR Model # DT60827-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60828-QZ - 26mm x 540mm x 400mm SDS max XLR
      DeWALT - 26mm x 540mm x 400mm SDS max XLR Model # DT60828-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60829-QZ - 28mm x 380mm x 250mm SDS max XLR
      DeWALT - 28mm x 380mm x 250mm SDS max XLR Model # DT60829-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60830-QZ - 28mm x 570mm x 450mm SDS max XLR
      DeWALT - 28mm x 570mm x 450mm SDS max XLR Model # DT60830-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60831-QZ - 28mm x 670mm x 550mm SDS max XLR
      DeWALT - 28mm x 670mm x 550mm SDS max XLR Model # DT60831-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60832-QZ - 30mm x 380mm x 250mm SDS max XLR
      DeWALT - 30mm x 380mm x 250mm SDS max XLR Model # DT60832-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60833-QZ - 30mm x 570mm x 450mm SDS max XLR
      DeWALT - 30mm x 570mm x 450mm SDS max XLR Model # DT60833-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60834-QZ - 32mm x 380mm x 250mm SDS max XLR
      DeWALT - 32mm x 380mm x 250mm SDS max XLR Model # DT60834-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60835-QZ - 32mm x 570mm x 450mm SDS max XLR
      DeWALT - 32mm x 570mm x 450mm SDS max XLR Model # DT60835-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60836-QZ - 32mm x 920mm x 800mm SDS max XLR
      DeWALT - 32mm x 920mm x 800mm SDS max XLR Model # DT60836-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60837-QZ - 35mm x 380mm x 250mm SDS max XLR
      DeWALT - 35mm x 380mm x 250mm SDS max XLR Model # DT60837-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60838-QZ - 35mm x 570mm x 450mm SDS max XLR
      DeWALT - 35mm x 570mm x 450mm SDS max XLR Model # DT60838-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60839-QZ - 35mm x 670mm x 550mm SDS max XLR
      DeWALT - 35mm x 670mm x 550mm SDS max XLR Model # DT60839-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60840-QZ - 36mm x 570mm x 450mm SDS max XLR
      DeWALT - 36mm x 570mm x 450mm SDS max XLR Model # DT60840-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60841-QZ - 38mm x 380mm x 250mm SDS max XLR
      DeWALT - 38mm x 380mm x 250mm SDS max XLR Model # DT60841-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60842-QZ - 38mm x 570mm x 450mm SDS max XLR
      DeWALT - 38mm x 570mm x 450mm SDS max XLR Model # DT60842-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60843-QZ - 38mm x 670mm x 550mm SDS max XLR
      DeWALT - 38mm x 670mm x 550mm SDS max XLR Model # DT60843-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60844-QZ - 40mm x 380mm x 250mm SDS max XLR
      DeWALT - 40mm x 380mm x 250mm SDS max XLR Model # DT60844-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60845-QZ - 40mm x 570mm x 450mm SDS max XLR
      DeWALT - 40mm x 570mm x 450mm SDS max XLR Model # DT60845-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60846-QZ - 40mm x 920mm x 800mm SDS max XLR
      DeWALT - 40mm x 920mm x 800mm SDS max XLR Model # DT60846-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT60847-QZ - 42mm x 570mm x 450mm SDS max XLR
      DeWALT - 42mm x 570mm x 450mm SDS max XLR Model # DT60847-QZ

     

    Constructed with a single piece carbide head; with four main cutting faces. For use with SDS MAX drive hammer drills for anchor; fixing or clearance holes in masonry; concrete; brick or block work.

    DeWALT DT6801-QZ - SDS-Plus Pointed Chisel 250mm Length
      DeWALT - SDS-Plus Pointed Chisel 250mm Length Model # DT6801-QZ

     

    For light chipping and chiselling of tile; mortar; glazing compounds and other masonry products with hammers with a rotation stop feature.

    DeWALT DT6802-QZ - SDS-Plus Flat Chisel 250mm X 20mm
      DeWALT - SDS-Plus Flat Chisel 250mm X 20mm Model # DT6802-QZ

     

    For light chipping and chiselling of tile; mortar; glazing compounds and other masonry products with hammers with a rotation stop feature.

    DeWALT DT6803-QZ - SDS-Plus Flat Chisel  200mm X 40mm
      DeWALT - SDS-Plus Flat Chisel 200mm X 40mm Model # DT6803-QZ

     

    For light chipping and chiselling of tile; mortar; glazing compounds and other masonry products with hammers with a rotation stop feature.

    DeWALT DT6811-QZ - XLR Self-Sharpening Chisels; SDS Max Flat Chisel 300 x 25mm
      DeWALT - XLR Self-Sharpening Chisels; SDS Max Flat Chisel 300 x 25mm Model # DT6811-QZ

     

    Increased durability; improved chisel life and chiselling speed through a new steel design combining a wear resistant "Stay Sharp" tip and high durability shock resistant body.

    DeWALT DT6812-QZ - XLR Self-Sharpening Chisels; SDS Max Flat Chisel 400 x 25mm
      DeWALT - XLR Self-Sharpening Chisels; SDS Max Flat Chisel 400 x 25mm Model # DT6812-QZ

     

    Increased durability; improved chisel life and chiselling speed through a new steel design combining a wear resistant "Stay Sharp" tip and high durability shock resistant body.

    DeWALT DT6818-QZ - XLR Self-Sharpening Chisels; SDS Max Flat Chisel 400 x 50mm
      DeWALT - XLR Self-Sharpening Chisels; SDS Max Flat Chisel 400 x 50mm Model # DT6818-QZ

     

    Increased durability; improved chisel life and chiselling speed through a new steel design combining a wear resistant "Stay Sharp" tip and high durability shock resistant body.

    DeWALT DT6820-QZ - SDS-Max Pointed Chisel 300mm
      DeWALT - SDS-Max Pointed Chisel 300mm Model # DT6820-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6821-QZ - SDS-Max Pointed Chisel 400mm
      DeWALT - SDS-Max Pointed Chisel 400mm Model # DT6821-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6822-QZ - SDS-Max Flat Chisel 300mm X 25mm
      DeWALT - SDS-Max Flat Chisel 300mm X 25mm Model # DT6822-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6823-QZ - SDS-Max Flat Chisel 400mm X 25mm
      DeWALT - SDS-Max Flat Chisel 400mm X 25mm Model # DT6823-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6824-QZ - SDS-Max Flat Chisel 360mm X 50mm
      DeWALT - SDS-Max Flat Chisel 360mm X 50mm Model # DT6824-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6825-QZ - SDS-Max Flat Chisel 300mm X 80mm
      DeWALT - SDS-Max Flat Chisel 300mm X 80mm Model # DT6825-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6830-QZ - SDS Max to SDS Plus Adaptor
    DeWALT DT6838-QZ - SDS-Max Bush Hammer 240mm X 45mm
      DeWALT - SDS-Max Bush Hammer 240mm X 45mm Model # DT6838-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6888-QZ - XLR Self-Sharpening Chisels; SDS Max Pointed Chisel 300mm
      DeWALT - XLR Self-Sharpening Chisels; SDS Max Pointed Chisel 300mm Model # DT6888-QZ

     

    Increased durability; improved chisel life and chiselling speed through a new steel design combining a wear resistant "Stay Sharp" tip and high durability shock resistant body.

    DeWALT DT6889-QZ - XLR Self-Sharpening Chisels; SDS Max Pointed Chisel 400mm
      DeWALT - XLR Self-Sharpening Chisels; SDS Max Pointed Chisel 400mm Model # DT6889-QZ

     

    Increased durability; improved chisel life and chiselling speed through a new steel design combining a wear resistant "Stay Sharp" tip and high durability shock resistant body.

    DeWALT DT6927-QZ - 28mm HEX Bull Point Chisel
      DeWALT - 28mm HEX Bull Point Chisel Model # DT6927-QZ

     

    Heavy duty breaking of concrete; ashphalt & stone.Heavy duty tamping tasks and earth rod driving.

    DeWALT DT6929-QZ - 28mm HEX Cold Chisel
      DeWALT - 28mm HEX Cold Chisel Model # DT6929-QZ

     

    Heavy duty breaking of concrete; ashphalt & stone.Heavy duty tamping tasks and earth rod driving.

    DeWALT DT6933-QZ - 28mm HEX Ground Rod Driver
      DeWALT - 28mm HEX Ground Rod Driver Model # DT6933-QZ

     

    Heavy duty breaking of concrete; ashphalt & stone.Heavy duty tamping tasks and earth rod driving.

    DeWALT DT6940-QZ - 19mm HEX Pointed Chisel 400mm Length
      DeWALT - 19mm HEX Pointed Chisel 400mm Length Model # DT6940-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6941-QZ - 19mm HEX Pointed Chisel 600mm Length
      DeWALT - 19mm HEX Pointed Chisel 600mm Length Model # DT6941-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6942-QZ - 19mm HEX Flat Chisel 400mm x 25mm
      DeWALT - 19mm HEX Flat Chisel 400mm x 25mm Model # DT6942-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6943-QZ - 19mm HEX Flat Chisel 600mm x 25mm
      DeWALT - 19mm HEX Flat Chisel 600mm x 25mm Model # DT6943-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6946-QZ - 19mm HEX Flat Wide Chisel 350mm x 140mm
      DeWALT - 19mm HEX Flat Wide Chisel 350mm x 140mm Model # DT6946-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6948-QZ - 19mm HEX Asphalt Cutter 400mm X 90mm
      DeWALT - 19mm HEX Asphalt Cutter 400mm X 90mm Model # DT6948-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6952-QZ - Masonry Drill Bit set 5Pcs
      DeWALT - Masonry Drill Bit set 5Pcs Model # DT6952-QZ

     

    Rotary/percussion masonry drill bit 130ø Douglas form carbide tip.

    DeWALT DT6953-QZ - XLR Self-Sharpening Chisels; 19mm Hex Pointed Chisel 400mm
      DeWALT - XLR Self-Sharpening Chisels; 19mm Hex Pointed Chisel 400mm Model # DT6953-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6956-QZ - Masonry Drill bit Set in plastic Cassette 5Pcs
      DeWALT - Masonry Drill bit Set in plastic Cassette 5Pcs Model # DT6956-QZ

     
    • Unique carbide grade for long life and greater durability
    • Innovative tip design provides an efficient drilling action and reduce walking for greater accuracy
    • Milled flute for fast drilling and special copper brazing to withstand high temperatures
    DeWALT DT6958-QZ - XLR Self-Sharpening Chisels; 19mm Hex Flat Chisel 400 x 25mm
      DeWALT - XLR Self-Sharpening Chisels; 19mm Hex Flat Chisel 400 x 25mm Model # DT6958-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT6978-QZ - XLR Self-Sharpening Chisels; SDS+ Pointed Chisel 300mm
      DeWALT - XLR Self-Sharpening Chisels; SDS+ Pointed Chisel 300mm Model # DT6978-QZ

     

    For light chipping and chiselling of tile; mortar; glazing compounds and other masonry products with hammers with a rotation stop feature.

    DeWALT DT6979-QZ - XLR Self-Sharpening Chisels; SDS+ Flat Chisel 200 x 25mm
      DeWALT - XLR Self-Sharpening Chisels; SDS+ Flat Chisel 200 x 25mm Model # DT6979-QZ

     

    For light chipping and chiselling of tile; mortar; glazing compounds and other masonry products with hammers with a rotation stop feature.

    DeWALT DT6984-QZ - XLR Self-Sharpening Chisels; SDS+ Flat Chisel 200 x 40mm
      DeWALT - XLR Self-Sharpening Chisels; SDS+ Flat Chisel 200 x 40mm Model # DT6984-QZ

     

    For light chipping and chiselling of tile; mortar; glazing compounds and other masonry products with hammers with a rotation stop feature.

    DeWALT DT7002-QZ - Chuck 1/2in X 20 UNF –  Cap 13mm
    DeWALT DT7011-QZ - Keyed Chuck 10mm
      DeWALT - Keyed Chuck 10mm Model # DT7011-QZ

     
    • Professional heavy duty chucks & keys.
    • For use with DEWALT and other makes of drills.
    DeWALT DT7012-QZ - Keyed Chuck 13mm
      DeWALT - Keyed Chuck 13mm Model # DT7012-QZ

     
    • Professional heavy duty chucks & keys.
    • For use with DEWALT and other makes of drills.
    DeWALT DT7021-QZ - Drill Chuck Key –  Fits 10mm and 13mm chucks (S2)
      DeWALT - Drill Chuck Key – Fits 10mm and 13mm chucks (S2) Model # DT7021-QZ

     
    • Professional heavy duty chucks & keys.
    • For use with DEWALT and other makes of drills.
    DeWALT DT7030-QZ - SDS Plus 1/2in x 20 UNF (Chuck Adaptor)
    DeWALT DT71563-QZ - 100pc Comb.Drill Bit set 13 Wood Bits / 12Metal Drill
      DeWALT - 100pc Comb.Drill Bit set 13 Wood Bits / 12Metal Drill Model # DT71563-QZ

     
    • Holds Bits Securely
    • Magnetic Bit Holder
    • Tough Plastic Storage Case
    • Suitable for Drilling, Masonry, Plastic, Metal & Wood
    DeWALT DT7226-QZ - Torsion Screwdriver Bits PZ2 x 50mm
      DeWALT - Torsion Screwdriver Bits PZ2 x 50mm Model # DT7226-QZ

     
    • For use with cordless or corded drills/screwdriver
    • For all screwdriving applications
    • For installation and Facade
    DeWALT DT7231-QZ - Torsion Screwdriver Bits PH1 x 25mm
      DeWALT - Torsion Screwdriver Bits PH1 x 25mm Model # DT7231-QZ

     
    • For use with cordless or corded drills/screwdriver
    • For all screwdriving applications
    • For installation and Facade
    DeWALT DT7232-QZ - Torsion Screwdriver Bits PH2 x 25mm
    DeWALT DT7238-QZ - Torsion Screwdriver Bits PH2 x 25mm
      DeWALT - Torsion Screwdriver Bits PH2 x 25mm Model # DT7238-QZ

     
    • For use with cordless or corded drills/screwdriver
    • For all screwdriving applications
    • For installation and Facade
    DeWALT DT7245-QZ - Torsion Screwdriver Bits PH1 x 50mm
      DeWALT - Torsion Screwdriver Bits PH1 x 50mm Model # DT7245-QZ

     
    • For use with cordless or corded drills/screwdriver
    • For all screwdriving applications
    • For installation and Facade
    DeWALT DT7246-QZ - Torsion Screwdriver Bits PH2 x 50mm
      DeWALT - Torsion Screwdriver Bits PH2 x 50mm Model # DT7246-QZ

     
    • For use with cordless or corded drills/screwdriver
    • For all screwdriving applications
    • For installation and Facade
    DeWALT DT7247-QZ - Torsion Screwdriver Bits PH3 x 50mm
      DeWALT - Torsion Screwdriver Bits PH3 x 50mm Model # DT7247-QZ

     
    • For use with cordless or corded drills/screwdriver
    • For all screwdriving applications
    • For installation and Facade
    DeWALT DT7255-QZ - Torx Screwdriver Bit T20 x 25mM
      DeWALT - Torx Screwdriver Bit T20 x 25mM Model # DT7255-QZ

     
    • For use with cordless or corded drills/screwdriver
    • For all screwdriving applications
    • For installation and Facade
    DeWALT DT7256-QZ - Torx Screwdriver Bit T25 x 25mM
      DeWALT - Torx Screwdriver Bit T25 x 25mM Model # DT7256-QZ

     
    • For use with cordless or corded drills/screwdriver
    • For all screwdriving applications
    • For installation and Facade
    DeWALT DT7401-QZ - Magnetic Nut Holder – Hex 7mm
      DeWALT - Magnetic Nut Holder – Hex 7mm Model # DT7401-QZ

     
    • For use with cordless or corded impact range
    • Fastening applications in automotive repare; heavy equipment maintenance; product assemble and major construction projects
    DeWALT DT7402-QZ - Magnetic Nut Holder – Hex 8mm
      DeWALT - Magnetic Nut Holder – Hex 8mm Model # DT7402-QZ

     
    • For use with cordless or corded impact range
    • Fastening applications in automotive repare; heavy equipment maintenance; product assemble and major construction projects
    DeWALT DT7403-QZ - Magnetic Nut Holder – Hex 10mm
      DeWALT - Magnetic Nut Holder – Hex 10mm Model # DT7403-QZ

     
    • For use with cordless or corded impact range
    • Fastening applications in automotive repare; heavy equipment maintenance; product assemble and major construction projects
    DeWALT DT7404-QZ - Magnetic Nut Holder – Hex 13mm
      DeWALT - Magnetic Nut Holder – Hex 13mm Model # DT7404-QZ

     
    • For use with cordless or corded impact range
    • Fastening applications in automotive repare; heavy equipment maintenance; product assemble and major construction projects
    DeWALT DT7500-QZ - Magnetic Bit Holder – Length 60mm
      DeWALT - Magnetic Bit Holder – Length 60mm Model # DT7500-QZ

     
    • For use with cordless or corded impact range
    • Fastening applications in automotive repare; heavy equipment maintenance; product assemble and major construction projects
    DeWALT DT7916-QZ - Screwdriver Bits Set  Pcs
      DeWALT - Screwdriver Bits Set Pcs Model # DT7916-QZ

     
    • For use in hard and soft wood; composite board and MDF
    • Ideal for cabinet making; furniture assembly; remodelling and shop fitting.
    DeWALT DT7926-XJ - Extreme 2 Metal Drill Bit Set 29 Piece
    DeWALT DT8087-QZ - SDS-Max Pointed Chisel 600mm
      DeWALT - SDS-Max Pointed Chisel 600mm Model # DT8087-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT8088-QZ - SDS-Max Flat Chisel L600XW25
      DeWALT - SDS-Max Flat Chisel L600XW25 Model # DT8088-QZ

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles; general masonry and mortar.

    DeWALT DT8101-QZ - Holesaw Mandrel 14-29mm
    DeWALT DT8102-QZ - Holesaw Mandrel 32 – 210MM
    DeWALT DT8116-QZ - 16mm Bi-Metal High Performance Holesaw
      DeWALT - 16mm Bi-Metal High Performance Holesaw Model # DT8116-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8119-QZ - 19mm Bi-Metal High Performance Holesaw
      DeWALT - 19mm Bi-Metal High Performance Holesaw Model # DT8119-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8120-QZ - 20mm Bi-Metal High Performance Holesaw
      DeWALT - 20mm Bi-Metal High Performance Holesaw Model # DT8120-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8122-QZ - 22mm Bi-Metal High Performance Holesaw
      DeWALT - 22mm Bi-Metal High Performance Holesaw Model # DT8122-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8125-QZ - 25mm Bi-Metal High Performance Holesaw
      DeWALT - 25mm Bi-Metal High Performance Holesaw Model # DT8125-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8127-QZ - 27mm Bi-Metal High Performance Holesaw
      DeWALT - 27mm Bi-Metal High Performance Holesaw Model # DT8127-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8130-QZ - 30mm Bi-Metal High Performance Holesaw
      DeWALT - 30mm Bi-Metal High Performance Holesaw Model # DT8130-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8132-QZ - 32mm Bi-Metal High Performance Holesaw
      DeWALT - 32mm Bi-Metal High Performance Holesaw Model # DT8132-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8135-QZ - 35mm Bi-Metal High Performance Holesaw
      DeWALT - 35mm Bi-Metal High Performance Holesaw Model # DT8135-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8138-QZ - 38mm Bi-Metal High Performance Holesaw
      DeWALT - 38mm Bi-Metal High Performance Holesaw Model # DT8138-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8140-QZ - 41mm Bi-Metal High Performance Holesaw
      DeWALT - 41mm Bi-Metal High Performance Holesaw Model # DT8140-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8141-QZ - 40mm Bi-Metal High Performance Holesaw
      DeWALT - 40mm Bi-Metal High Performance Holesaw Model # DT8141-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8145-QZ - 44mm Bi-Metal High Performance Holesaw
      DeWALT - 44mm Bi-Metal High Performance Holesaw Model # DT8145-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8148-QZ - 48mm Bi-Metal High Performance Holesaw
      DeWALT - 48mm Bi-Metal High Performance Holesaw Model # DT8148-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8151-QZ - 51mm Bi-Metal High Performance Holesaw
      DeWALT - 51mm Bi-Metal High Performance Holesaw Model # DT8151-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8154-QZ - 54mm Bi-Metal High Performance Holesaw
      DeWALT - 54mm Bi-Metal High Performance Holesaw Model # DT8154-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8160-QZ - 60mm Bi-Metal High Performance Holesaw
      DeWALT - 60mm Bi-Metal High Performance Holesaw Model # DT8160-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8164-QZ - 64mm Bi-Metal High Performance Holesaw
      DeWALT - 64mm Bi-Metal High Performance Holesaw Model # DT8164-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8167-QZ - 67mm Bi-Metal High Performance Holesaw
      DeWALT - 67mm Bi-Metal High Performance Holesaw Model # DT8167-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8170-QZ - 70mm Bi-Metal High Performance Holesaw
      DeWALT - 70mm Bi-Metal High Performance Holesaw Model # DT8170-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8173-QZ - 73mm Bi-Metal High Performance Holesaw
      DeWALT - 73mm Bi-Metal High Performance Holesaw Model # DT8173-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8176-QZ - 76mm Bi-Metal High Performance Holesaw
      DeWALT - 76mm Bi-Metal High Performance Holesaw Model # DT8176-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8202-QZ - 102mm Bi-Metal High Performance Holesaw
      DeWALT - 102mm Bi-Metal High Performance Holesaw Model # DT8202-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8214-QZ - 114mm Bi-Metal High Performance Holesaw
      DeWALT - 114mm Bi-Metal High Performance Holesaw Model # DT8214-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8221-QZ - 121mm Bi-Metal High Performance Holesaw
      DeWALT - 121mm Bi-Metal High Performance Holesaw Model # DT8221-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8227-QZ - 127mm Bi-Metal High Performance Holesaw
      DeWALT - 127mm Bi-Metal High Performance Holesaw Model # DT8227-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8240-QZ - 140mm Bi-Metal High Performance Holesaw
      DeWALT - 140mm Bi-Metal High Performance Holesaw Model # DT8240-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass;
    copper; aluminum;wood;plastic and other composites

    DeWALT DT8252-QZ - 152mm Bi-Metal High Performance Holesaw
      DeWALT - 152mm Bi-Metal High Performance Holesaw Model # DT8252-QZ

     

    Ideal for the cutting holes in steel; stainless steel; brass; copper; aluminum;wood;plastic and other composites

    DeWALT DT84500-QZ - Magnetic Drill Cutter; 25mm Cutter – 14mm Dia
    DeWALT DT84501-QZ - Magnetic Drill Cutter; 25mm Cutter – 16mm Dia
    DeWALT DT84502-QZ - Magnetic Drill Cutter; 50mm Cutter – 18mm Dia
    DeWALT DT84503-QZ - Magnetic Drill Cutter; 50mm Cutter – 20mm Dia
    DeWALT DT84504-QZ - Magnetic Drill Cutter; 50mmCutter – 22mm Dia
    DeWALT DT84505-QZ - Magnetic Drill Cutter; 50mm Cutter – 24mm Dia
    DeWALT DT84506-QZ - Magnetic Drill Cutter; 50mm Cutter – 26mm Dia
    DeWALT DT84507-QZ - Magnetic Drill Cutter; 50mm Cutter – 28mm Dia
    DeWALT DT84508-QZ - Magnetic Drill Cutter; 50mm Cutter – 30mm Dia
    DeWALT DT84509-QZ - Magnetic Drill Cutter; 50mm Cutter – 32mm Dia
    DeWALT DT84510-QZ - Magnetic Drill Cutter; 50mm Cutter – 40mm Dia
    DeWALT DT84511-QZ - Magnetic Drill Cutter; 50mm Cutter – 50mm Dia
    DeWALT DT84512-QZ - Magnetic Drill Cutter; 2 x Pilot pin
    DeWALT DT8472-QZ - Bandsaw Blade
    DeWALT DT8473-QZ - Bandsaw Blade
    DeWALT DT8474-QZ - Bandsaw Blade
      DeWALT - Bandsaw Blade Model # DT8474-QZ

     

    For use with DW876

    DeWALT DT8475-QZ - Non Ferrous Bandsaw Blade; 6mm
      DeWALT - Non Ferrous Bandsaw Blade; 6mm Model # DT8475-QZ

     

    For use with DW876

    DeWALT DT8476-QZ - Non Ferrous Metal Bandsaw Blade; 12mm
    DeWALT DT8481-QZ - General Purpose Bandsaw Blade -12mm
      DeWALT - General Purpose Bandsaw Blade -12mm Model # DT8481-QZ

     

    For use with DW738

    DeWALT DT8482-QZ - Thick wood Bandsaw blade; 16mm
      DeWALT - Thick wood Bandsaw blade; 16mm Model # DT8482-QZ

     

    For use with DW738

    DeWALT DT8484-QZ - Non ferrous metals Bandsaw Blade; 6mm
    DeWALT DT8485-QZ - Non ferrous metals Bandsaw Blade; 12mm
    DeWALT DT8486-QZ - Laminated Wood Bandsaw Blade; 10mm
      DeWALT - Laminated Wood Bandsaw Blade; 10mm Model # DT8486-QZ

     

    For use with DW738

    DeWALT DT8912-QZ - SDS-Plus Bit – XLR D6 x L110 x WL50
      DeWALT - SDS-Plus Bit – XLR D6 x L110 x WL50 Model # DT8912-QZ

     

    Suitable for drilling plug & anchor holes in masonry;
    all types of stone and concrete.

    DeWALT DT8913-QZ - SDS-Plus Bit – XLR D6 x L160 x WL100
      DeWALT - SDS-Plus Bit – XLR D6 x L160 x WL100 Model # DT8913-QZ

     

    Suitable for drilling plug & anchor holes in masonry;
    all types of stone and concrete.

    DeWALT DT8923-QZ - SDS-Plus Bit – XLR D8 x L160 x WL100
      DeWALT - SDS-Plus Bit – XLR D8 x L160 x WL100 Model # DT8923-QZ

     

    Suitable for drilling plug & anchor holes in masonry;
    all types of stone and concrete.

    DeWALT DT8928-QZ - SDS-Plus Bit – XLR D10 x L160 x WL100
      DeWALT - SDS-Plus Bit – XLR D10 x L160 x WL100 Model # DT8928-QZ

     

    Suitable for drilling plug & anchor holes in masonry;
    all types of stone and concrete.

    DeWALT DT8933-QZ - SDS-Plus Bit – XLR D12 x L160 x WL100
      DeWALT - SDS-Plus Bit – XLR D12 x L160 x WL100 Model # DT8933-QZ

     

    Suitable for drilling plug & anchor holes in masonry;
    all types of stone and concrete.

    DeWALT DT8939-QZ - SDS-Plus Bit – XLR D14 x L200 x WL150
      DeWALT - SDS-Plus Bit – XLR D14 x L200 x WL150 Model # DT8939-QZ

     

    Suitable for drilling plug & anchor holes in masonry;
    all types of stone and concrete.

    DeWALT DT9400-QZ - SDS-Max Bit Professional 12mm X 340mm X 200mm – 2 Cutters
      DeWALT - SDS-Max Bit Professional 12mm X 340mm X 200mm – 2 Cutters Model # DT9400-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9401-QZ - SDS-Max Bit Professional 12mm X 540mm X 400mm – 2 Cutters
      DeWALT - SDS-Max Bit Professional 12mm X 540mm X 400mm – 2 Cutters Model # DT9401-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9403-QZ - SDS-Max Bit Professional 13mm X 340mm X 200mm – 2 Cutters
      DeWALT - SDS-Max Bit Professional 13mm X 340mm X 200mm – 2 Cutters Model # DT9403-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9404-QZ - SDS-Max Bit Professional 13mm X 540mm X 400mm – 2 Cutters
      DeWALT - SDS-Max Bit Professional 13mm X 540mm X 400mm – 2 Cutters Model # DT9404-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9405-QZ - SDS-Max Bit Professional 14mm X 340mm X 200mm – 2 Cutters
      DeWALT - SDS-Max Bit Professional 14mm X 340mm X 200mm – 2 Cutters Model # DT9405-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9406-QZ - SDS-Max Bit Professional 14mm X 540mm X 400mm – 2 Cutters
      DeWALT - SDS-Max Bit Professional 14mm X 540mm X 400mm – 2 Cutters Model # DT9406-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9407-QZ - SDS-Max Bit Professional 15mm X 340mm X 200mm – 2 Cutters
      DeWALT - SDS-Max Bit Professional 15mm X 340mm X 200mm – 2 Cutters Model # DT9407-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9408-QZ - SDS-Max Bit Professional 15mm X 540mm X 400mm – 2 Cutters
      DeWALT - SDS-Max Bit Professional 15mm X 540mm X 400mm – 2 Cutters Model # DT9408-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9409-QZ - SDS-Max Bit Professional 16mm X 340mm X 200mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 16mm X 340mm X 200mm – 4 Cutters Model # DT9409-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9410-QZ - SDS-Max Bit Professional 16mm X 540mm X 400mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 16mm X 540mm X 400mm – 4 Cutters Model # DT9410-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9411-QZ - SDS-Max Bit Professional 18mm X 340mm X 200mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 18mm X 340mm X 200mm – 4 Cutters Model # DT9411-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9412-QZ - SDS-Max Bit Professional 18mm X 540mm X 400mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 18mm X 540mm X 400mm – 4 Cutters Model # DT9412-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9416-QZ - SDS-Max Bit Professional 20mm X 340mm X 200mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 20mm X 340mm X 200mm – 4 Cutters Model # DT9416-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9417-QZ - SDS-Max Bit Professional 20mm X 540mm X 400mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 20mm X 540mm X 400mm – 4 Cutters Model # DT9417-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9418-QZ - SDS-Max Bit Professional 20mm X 920mm X 800mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 20mm X 920mm X 800mm – 4 Cutters Model # DT9418-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9419-QZ - SDS-Max Bit Professional 22mm X 340mm X 200mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 22mm X 340mm X 200mm – 4 Cutters Model # DT9419-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9420-QZ - SDS-Max Bit Professional 22mm X 540mm X 400mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 22mm X 540mm X 400mm – 4 Cutters Model # DT9420-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9421-QZ - SDS-Max Bit Professional 22mm X 920mm X 800mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 22mm X 920mm X 800mm – 4 Cutters Model # DT9421-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9422-QZ - SDS-Max Bit Professional 24mm X 340mm X 200mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 24mm X 340mm X 200mm – 4 Cutters Model # DT9422-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9423-QZ - SDS-Max Bit Professional 24mm X 540mm X 400mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 24mm X 540mm X 400mm – 4 Cutters Model # DT9423-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9424-QZ - SDS-Max Bit Professional 25mm X 340mm X 200mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 25mm X 340mm X 200mm – 4 Cutters Model # DT9424-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9425-QZ - SDS-Max Bit Professional 25mm X 540mm X 400mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 25mm X 540mm X 400mm – 4 Cutters Model # DT9425-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9426-QZ - SDS-Max Bit Professional 25mm X 920mm X 800mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 25mm X 920mm X 800mm – 4 Cutters Model # DT9426-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9427-QZ - SDS-Max Bit Professional 26mm X 340mm X 200mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 26mm X 340mm X 200mm – 4 Cutters Model # DT9427-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9428-QZ - SDS-Max Bit Professional 26mm X 540mm X 400mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 26mm X 540mm X 400mm – 4 Cutters Model # DT9428-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9429-QZ - SDS-Max Bit Professional 28mm X 380mm X 250mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 28mm X 380mm X 250mm – 4 Cutters Model # DT9429-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9430-QZ - SDS-Max Bit Professional 28mm X 570mm X 450mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 28mm X 570mm X 450mm – 4 Cutters Model # DT9430-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9431-QZ - SDS-Max Bit Professional 28mm X 670mm X 550mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 28mm X 670mm X 550mm – 4 Cutters Model # DT9431-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9432-QZ - SDS-Max Bit Professional 30mm X 380mm X 250mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 30mm X 380mm X 250mm – 4 Cutters Model # DT9432-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9433-QZ - SDS-Max Bit Professional 30mm X 570mm X 450mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 30mm X 570mm X 450mm – 4 Cutters Model # DT9433-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9434-QZ - SDS-Max Bit Professional 32mm X 380mm X 250mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 32mm X 380mm X 250mm – 4 Cutters Model # DT9434-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9435-QZ - SDS-Max Bit Professional 32mm X 570mm X 450mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 32mm X 570mm X 450mm – 4 Cutters Model # DT9435-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9436-QZ - SDS-Max Bit Professional 32mm X 920mm X 800mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 32mm X 920mm X 800mm – 4 Cutters Model # DT9436-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9438-QZ - SDS-Max Bit Professional 35mm X 570mm X 450mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 35mm X 570mm X 450mm – 4 Cutters Model # DT9438-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9439-QZ - SDS-Max Bit Professional 35mm X 670mm X 550mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 35mm X 670mm X 550mm – 4 Cutters Model # DT9439-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9440-QZ - SDS-Max Bit Professional 36mm X 570mm X 450mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 36mm X 570mm X 450mm – 4 Cutters Model # DT9440-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9441-QZ - SDS-Max Bit Professional 38mm X 380mm X 250mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 38mm X 380mm X 250mm – 4 Cutters Model # DT9441-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9442-QZ - SDS-Max Bit Professional 38mm X 570mm X 450mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 38mm X 570mm X 450mm – 4 Cutters Model # DT9442-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9444-QZ - SDS-Max Bit Professional 40mm X 380mm X 250mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 40mm X 380mm X 250mm – 4 Cutters Model # DT9444-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9445-QZ - SDS-Max Bit Professional 40mm X 570mm X 450mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 40mm X 570mm X 450mm – 4 Cutters Model # DT9445-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9448-QZ - SDS-Max Bit Professional 45mm X 570mm X 450mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 45mm X 570mm X 450mm – 4 Cutters Model # DT9448-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9450-QZ - SDS-Max Bit Professional 52mm X 570mm X 450mm – 4 Cutters
      DeWALT - SDS-Max Bit Professional 52mm X 570mm X 450mm – 4 Cutters Model # DT9450-QZ

     

    For use with SDS-Max drive hammer drills for anchor; fixing or clearance holes in masonry concrete; brick or block work.

    DeWALT DT9502-QZ - SDS-Max Drill Bit 4mm X 110mm X 50mm
    DeWALT DT9504-QZ - SDS-Plus Bit  5mm X 110mm X 50mm
      DeWALT - SDS-Plus Bit 5mm X 110mm X 50mm Model # DT9504-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9505-QZ - SDS-Plus Bit  5mm X 160mm X 100mm
      DeWALT - SDS-Plus Bit 5mm X 160mm X 100mm Model # DT9505-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9506-QZ - SDS-Plus Bit  5mm X 210mm X 150mm
      DeWALT - SDS-Plus Bit 5mm X 210mm X 150mm Model # DT9506-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9514-QZ - SDS-Plus Bit  6mm X 110mm X 50mm
      DeWALT - SDS-Plus Bit 6mm X 110mm X 50mm Model # DT9514-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9515-QZ - SDS-Plus Bit  6mm X 160mm X 100mm
      DeWALT - SDS-Plus Bit 6mm X 160mm X 100mm Model # DT9515-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9516-QZ - SDS-Plus Bit  6mm X 210mm X 150mm
      DeWALT - SDS-Plus Bit 6mm X 210mm X 150mm Model # DT9516-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9517-QZ - SDS-Plus Bit  6mm X 260mm X 200mm
      DeWALT - SDS-Plus Bit 6mm X 260mm X 200mm Model # DT9517-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9521-QZ - SDS-Plus Bit  6.5mm X 210mm X 150mm
      DeWALT - SDS-Plus Bit 6.5mm X 210mm X 150mm Model # DT9521-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9524-QZ - SDS-Plus Bit  7mm X 110mm X 50mm
      DeWALT - SDS-Plus Bit 7mm X 110mm X 50mm Model # DT9524-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9525-QZ - SDS-Plus Bit  7mm X 160mm X 100mm
      DeWALT - SDS-Plus Bit 7mm X 160mm X 100mm Model # DT9525-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9526-QZ - SDS-Plus Bit  7mm X 210mm X 150mm
      DeWALT - SDS-Plus Bit 7mm X 210mm X 150mm Model # DT9526-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9528-QZ - SDS-Plus Bit  8mm X 110mm X 50mm
      DeWALT - SDS-Plus Bit 8mm X 110mm X 50mm Model # DT9528-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9529-QZ - SDS-Plus Bit  8mm X 160mm X 100mm
      DeWALT - SDS-Plus Bit 8mm X 160mm X 100mm Model # DT9529-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9530-QZ - SDS-Plus Bit  8mm X 210mm X 150mm
      DeWALT - SDS-Plus Bit 8mm X 210mm X 150mm Model # DT9530-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9531-QZ - SDS-Plus Bit  8mm X 260mm X 200mm
      DeWALT - SDS-Plus Bit 8mm X 260mm X 200mm Model # DT9531-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9532-QZ - SDS-Plus Bit  8mm X 310mm X 250mm
      DeWALT - SDS-Plus Bit 8mm X 310mm X 250mm Model # DT9532-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9534-QZ - SDS-Plus Bit  8mm X 460mm X 400mm
      DeWALT - SDS-Plus Bit 8mm X 460mm X 400mm Model # DT9534-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9539-QZ - SDS-Plus Bit  10mm X 110mm X 50mm
      DeWALT - SDS-Plus Bit 10mm X 110mm X 50mm Model # DT9539-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9540-QZ - SDS-Plus Bit  10mm X 160mm X 100mm
      DeWALT - SDS-Plus Bit 10mm X 160mm X 100mm Model # DT9540-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9541-QZ - SDS-Plus Bit  10mm X 210mm X 150mm
      DeWALT - SDS-Plus Bit 10mm X 210mm X 150mm Model # DT9541-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9542-QZ - SDS-Plus Bit  10mm X 260mm X 200mm
      DeWALT - SDS-Plus Bit 10mm X 260mm X 200mm Model # DT9542-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9543-QZ - SDS-Plus Bit  10mm X 310mm X 250mm
      DeWALT - SDS-Plus Bit 10mm X 310mm X 250mm Model # DT9543-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9544-QZ - SDS-Plus Bit  10mm X 350mm X 300mm
      DeWALT - SDS-Plus Bit 10mm X 350mm X 300mm Model # DT9544-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9545-QZ - SDS-Plus Bit  10mm X 460mm X 400mm
      DeWALT - SDS-Plus Bit 10mm X 460mm X 400mm Model # DT9545-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9552-QZ - SDS-Plus Bit  12mm X 160mm X 100mm
      DeWALT - SDS-Plus Bit 12mm X 160mm X 100mm Model # DT9552-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9553-QZ - SDS-Plus Bit  12mm X 200mm X 150mm
      DeWALT - SDS-Plus Bit 12mm X 200mm X 150mm Model # DT9553-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9554-QZ - SDS-Plus Bit  12mm X 260mm X 200mm
      DeWALT - SDS-Plus Bit 12mm X 260mm X 200mm Model # DT9554-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9555-QZ - SDS-Plus Bit  12mm X 300mm X 250mm
      DeWALT - SDS-Plus Bit 12mm X 300mm X 250mm Model # DT9555-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9556-QZ - SDS-Plus Bit  12mm X 350mm X 300mm
      DeWALT - SDS-Plus Bit 12mm X 350mm X 300mm Model # DT9556-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9557-QZ - SDS-Plus Bit  12mm X 450mm X 400mm
      DeWALT - SDS-Plus Bit 12mm X 450mm X 400mm Model # DT9557-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9560-QZ - SDS-Plus Bit  13mm X 160mm X 100mm
      DeWALT - SDS-Plus Bit 13mm X 160mm X 100mm Model # DT9560-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9566-QZ - SDS-Plus Bit  14mm X 160mm X 100mm
      DeWALT - SDS-Plus Bit 14mm X 160mm X 100mm Model # DT9566-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9567-QZ - SDS-Plus Bit  14mm X 200mm X 150mm
      DeWALT - SDS-Plus Bit 14mm X 200mm X 150mm Model # DT9567-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9568-QZ - SDS-Plus Bit  14mm X 260mm X 200mm
      DeWALT - SDS-Plus Bit 14mm X 260mm X 200mm Model # DT9568-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9569-QZ - SDS-Plus Bit  14mm X 300mm X 250mm
      DeWALT - SDS-Plus Bit 14mm X 300mm X 250mm Model # DT9569-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9570-QZ - SDS-Plus Bit  14mm X 450mm X 400mm
      DeWALT - SDS-Plus Bit 14mm X 450mm X 400mm Model # DT9570-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9575-QZ - SDS-Plus Bit  15mm X 260mm X 200mm
    DeWALT DT9578-QZ - SDS-Plus Bit  16mm X 160mm X 100mm
      DeWALT - SDS-Plus Bit 16mm X 160mm X 100mm Model # DT9578-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9579-QZ - SDS-Plus Bit  16mm X 200mm X 150mm
      DeWALT - SDS-Plus Bit 16mm X 200mm X 150mm Model # DT9579-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9580-QZ - SDS-Plus Bit  16mm X 260mm X 200mm
      DeWALT - SDS-Plus Bit 16mm X 260mm X 200mm Model # DT9580-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9581-QZ - SDS-Plus Bit  16mm X 300mm X 250mm
      DeWALT - SDS-Plus Bit 16mm X 300mm X 250mm Model # DT9581-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9582-QZ - SDS-Plus Bit  16mm X 450mm X 400mm
      DeWALT - SDS-Plus Bit 16mm X 450mm X 400mm Model # DT9582-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9583-QZ - SDS-Plus Bit  16mm X 600mm X 550mm
      DeWALT - SDS-Plus Bit 16mm X 600mm X 550mm Model # DT9583-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9587-QZ - SDS-Plus Bit  18mm X 200mm X 150mm
      DeWALT - SDS-Plus Bit 18mm X 200mm X 150mm Model # DT9587-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9588-QZ - SDS-Plus Bit  18mm X 250mm X 200mm
      DeWALT - SDS-Plus Bit 18mm X 250mm X 200mm Model # DT9588-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9589-QZ - SDS-Plus Bit  18mm X 300mm X 250mm
      DeWALT - SDS-Plus Bit 18mm X 300mm X 250mm Model # DT9589-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9590-QZ - SDS-Plus Bit  18mm X 450mm X 400mm
      DeWALT - SDS-Plus Bit 18mm X 450mm X 400mm Model # DT9590-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9597-QZ - SDS-Plus Bit  20mm X 200mm X 150mm
      DeWALT - SDS-Plus Bit 20mm X 200mm X 150mm Model # DT9597-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9598-QZ - SDS-Plus Bit  20mm X 300mm X 250mm
      DeWALT - SDS-Plus Bit 20mm X 300mm X 250mm Model # DT9598-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9599-QZ - SDS-Plus Bit  20mm X 450mm X 400mm
      DeWALT - SDS-Plus Bit 20mm X 450mm X 400mm Model # DT9599-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9600-QZ - SDS-Plus Bit  20mm X 600mm X 550mm
      DeWALT - SDS-Plus Bit 20mm X 600mm X 550mm Model # DT9600-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9602-QZ - SDS-Plus Bit  22mm X 250mm X 200mm
      DeWALT - SDS-Plus Bit 22mm X 250mm X 200mm Model # DT9602-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9603-QZ - SDS-Plus Bit  22mm X 300mm X 250mm
      DeWALT - SDS-Plus Bit 22mm X 300mm X 250mm Model # DT9603-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9604-QZ - SDS-Plus Bit  22mm X 450mm X 400mm
      DeWALT - SDS-Plus Bit 22mm X 450mm X 400mm Model # DT9604-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9609-QZ - SDS-Plus Bit  24mm X 250mm X 200mm
      DeWALT - SDS-Plus Bit 24mm X 250mm X 200mm Model # DT9609-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9610-QZ - SDS-Plus Bit  24mm X 450mm X 400mm
      DeWALT - SDS-Plus Bit 24mm X 450mm X 400mm Model # DT9610-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9611-QZ - SDS-Plus Bit  25mm X 250mm X 200mm
      DeWALT - SDS-Plus Bit 25mm X 250mm X 200mm Model # DT9611-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9612-QZ - SDS-Plus Bit  25mm X 300mm X 250mm
      DeWALT - SDS-Plus Bit 25mm X 300mm X 250mm Model # DT9612-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9613-QZ - SDS-Plus Bit  25mm X 450mm X 400mm
      DeWALT - SDS-Plus Bit 25mm X 450mm X 400mm Model # DT9613-QZ

     
    • Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work.
    DeWALT DT9615-QZ - SDS-Plus Bit 26mm X 250mm X 200mm
    DeWALT DT9616-QZ - SDS-Plus Bit 26mm X 450mm X 400mm
    DeWALT DT9700-QZ - SDS-Plus Bit  Plastic cassette 4Pcs Set
      DeWALT - SDS-Plus Bit Plastic cassette 4Pcs Set Model # DT9700-QZ

     

    Suitable for drilling concrete; brick and block

    DeWALT DW00700-AE - SDS Plus Drill Bit  4mm X 50mm X 110mm
      DeWALT - SDS Plus Drill Bit 4mm X 50mm X 110mm Model # DW00700-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00701-AE - SDS Plus Drill Bit  5mm X 45mm X 110mm
      DeWALT - SDS Plus Drill Bit 5mm X 45mm X 110mm Model # DW00701-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00702-AE - SDS Plus Drill Bit 6mm X 50mm X 110mm
      DeWALT - SDS Plus Drill Bit 6mm X 50mm X 110mm Model # DW00702-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00703-AE - SDS Plus Drill Bit 6mm X 95mm X 160mm
      DeWALT - SDS Plus Drill Bit 6mm X 95mm X 160mm Model # DW00703-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00705-AE - SDS Plus Drill Bit 8mm X 50mm X 110mm
      DeWALT - SDS Plus Drill Bit 8mm X 50mm X 110mm Model # DW00705-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00706-AE - SDS Plus Drill Bit 8mm X 95mm X 160mm
      DeWALT - SDS Plus Drill Bit 8mm X 95mm X 160mm Model # DW00706-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00707-AE - SDS Plus Drill Bit  8mm X 150mm X 210mm
      DeWALT - SDS Plus Drill Bit 8mm X 150mm X 210mm Model # DW00707-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00708-AE - SDS Plus Drill Bit  10mm X 50mm X 110mm
      DeWALT - SDS Plus Drill Bit 10mm X 50mm X 110mm Model # DW00708-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00709-AE - SDS Plus Drill Bit  10mm X 95mm X 160mm
      DeWALT - SDS Plus Drill Bit 10mm X 95mm X 160mm Model # DW00709-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00710-AE - SDS Plus Drill Bit  10mm X 150mm X 210mm
      DeWALT - SDS Plus Drill Bit 10mm X 150mm X 210mm Model # DW00710-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00711-AE - SDS Plus Drill Bit  10mm X 270mm X 350mm
      DeWALT - SDS Plus Drill Bit 10mm X 270mm X 350mm Model # DW00711-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00712-AE - SDS Plus Drill Bit  12mm X 95mm X 160mm
      DeWALT - SDS Plus Drill Bit 12mm X 95mm X 160mm Model # DW00712-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00713-AE - SDS Plus Drill Bit 12mm X 410mm X 460mm
      DeWALT - SDS Plus Drill Bit 12mm X 410mm X 460mm Model # DW00713-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00714-AE - SDS Plus Drill Bit  13mm X 100mm X 160mm
      DeWALT - SDS Plus Drill Bit 13mm X 100mm X 160mm Model # DW00714-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00715-AE - SDS Plus Drill Bit  13mm X 250mm X 300mm
      DeWALT - SDS Plus Drill Bit 13mm X 250mm X 300mm Model # DW00715-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00716-AE - SDS Plus Drill Bit  14mm X 100mm X 160mm
      DeWALT - SDS Plus Drill Bit 14mm X 100mm X 160mm Model # DW00716-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00717-AE - SDS Plus Drill Bit  16mm X 100mm X 160mm
      DeWALT - SDS Plus Drill Bit 16mm X 100mm X 160mm Model # DW00717-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00718-AE - SDS Plus Drill Bit  16mm X 150mm X 200mm
      DeWALT - SDS Plus Drill Bit 16mm X 150mm X 200mm Model # DW00718-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00719-AE - SDS Plus Drill Bit  16mm X 250mm X 300mm
      DeWALT - SDS Plus Drill Bit 16mm X 250mm X 300mm Model # DW00719-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00720-AE - SDS Plus Drill Bit  16mm X 410mm X 460mm
      DeWALT - SDS Plus Drill Bit 16mm X 410mm X 460mm Model # DW00720-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00721-AE - SDS Plus Drill Bit  18mm X 150mm X 200mm
      DeWALT - SDS Plus Drill Bit 18mm X 150mm X 200mm Model # DW00721-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00725-AE - SDS Plus Drill Bit  20mm X 150mm X 200mm
      DeWALT - SDS Plus Drill Bit 20mm X 150mm X 200mm Model # DW00725-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00726-AE - SDS Plus Drill Bit  20mm X 250mm X 300mm
      DeWALT - SDS Plus Drill Bit 20mm X 250mm X 300mm Model # DW00726-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00729-AE - SDS Plus Drill Bit  22mm X 250mm X 300mm
      DeWALT - SDS Plus Drill Bit 22mm X 250mm X 300mm Model # DW00729-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00730-AE - SDS Plus Drill Bit  22mm X 400mm X 450mm
      DeWALT - SDS Plus Drill Bit 22mm X 400mm X 450mm Model # DW00730-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00731-AE - SDS Plus Drill Bit  25mm X 200mm X 250mm
      DeWALT - SDS Plus Drill Bit 25mm X 200mm X 250mm Model # DW00731-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00732-AE - SDS Plus Drill Bit  25mm X 400mm X 450mm
      DeWALT - SDS Plus Drill Bit 25mm X 400mm X 450mm Model # DW00732-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00733-AE - SDS Plus Drill Bit 6mm X 150mm X 210mm
      DeWALT - SDS Plus Drill Bit 6mm X 150mm X 210mm Model # DW00733-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00736-AE - SDS Plus Drill Bit  12mm X 150mm X 200mm
      DeWALT - SDS Plus Drill Bit 12mm X 150mm X 200mm Model # DW00736-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00737-AE - SDS Plus Drill Bit  14mm X 150mm X 200mm
      DeWALT - SDS Plus Drill Bit 14mm X 150mm X 200mm Model # DW00737-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00739-AE - SDS Plus Drill Bit  12mm X 200mm X 266mm
      DeWALT - SDS Plus Drill Bit 12mm X 200mm X 266mm Model # DW00739-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW00740-AE - SDS Plus Drill Bit  14mm X 350mm X 300mm
      DeWALT - SDS Plus Drill Bit 14mm X 350mm X 300mm Model # DW00740-AE

     

    Suitable for fast drilling of plug; anchor or clearance holes in masonry; stone; concrete and brick/block work

    DeWALT DW4988 - Angle Grinder Polishing Bonnet; 178mm
    DeWALT DWA0801-B1 - SDS Plus Point Chisel 250 mm
      DeWALT - SDS Plus Point Chisel 250 mm Model # DWA0801-B1

     

    For light chipping and chiselling of tile; mortar; glazing compounds and other masonry products withhammers with a rotation stop feature.

    DeWALT DWA0802-B1 - SDS Plus Flat Chisel 250 x 20 mm
      DeWALT - SDS Plus Flat Chisel 250 x 20 mm Model # DWA0802-B1

     

    For light chipping and chiselling of tile; mortar; glazing compounds and other masonry products withhammers with a rotation stop feature.

    DeWALT DWA0803-B1 - SDS Plus Flat Chisel 200 x 40 mm
      DeWALT - SDS Plus Flat Chisel 200 x 40 mm Model # DWA0803-B1

     

    For light chipping and chiselling of tile; mortar; glazing compounds and other masonry products withhammers with a rotation stop feature.

    DeWALT DWA0804-B1 - SDS Max Pointed Chisel 300 mm
      DeWALT - SDS Max Pointed Chisel 300 mm Model # DWA0804-B1

     

    Specially toughened steel and micro-processor controlled heat treatment ensures consistent tough bits with long life.

    DeWALT DWA0805-B1 - SDS Max Pointed Chisel 400 mm
      DeWALT - SDS Max Pointed Chisel 400 mm Model # DWA0805-B1

     

    Specially toughened steel and micro-processor controlled heat treatment ensures consistent tough bits with long life.

    DeWALT DWA0806-B1 - SDS Max Flat Chisel 300 x 25 mm
      DeWALT - SDS Max Flat Chisel 300 x 25 mm Model # DWA0806-B1

     

    Specially toughened steel and micro-processor controlled heat treatment ensures consistent tough bits with long life.

    DeWALT DWA0807-B1 - SDS Max Flat Chisel 400 x 25 mm
      DeWALT - SDS Max Flat Chisel 400 x 25 mm Model # DWA0807-B1

     

    Specially toughened steel and micro-processor controlled heat treatment ensures consistent tough bits with long life.

    DeWALT DWA0808-B1 - SDS Max Flat Chisel 400 x 50 mm
      DeWALT - SDS Max Flat Chisel 400 x 50 mm Model # DWA0808-B1

     

    Specially toughened steel and micro-processor controlled heat treatment ensures consistent tough bits with long life.

    DeWALT DWA0809-B1 - 19mm Hex Pointed Chisel 400 mm
      DeWALT - 19mm Hex Pointed Chisel 400 mm Model # DWA0809-B1

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles;general masonry and mortar.

    DeWALT DWA0810-B1 - 19mm Hex Pointed Chisel 600 mm
      DeWALT - 19mm Hex Pointed Chisel 600 mm Model # DWA0810-B1

     

    For heavy duty chiselling; channelling; and demolition tasks in concrete; stone (medium hardness); floor and wall tiles;general masonry and mortar.