• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • PCE Instruments DFG N 100TW - Torque Meter 1/2″ Square Socket 100 Nm
      PCE Instruments - Torque Meter 1/2″ Square Socket 100 Nm Model # DFG N 100TW

     
    • The torque wrench tester consists of a handheld measuring device and an external torque transducer.
    • The torsion transducer is connected to the hand-held device via a 1.5 m / 4.9 ft long cable and thus enables installation in a test stand or direct assembly on a test bench.
    • The torque measuring device is delivered adjusted so that the control measurements can be started immediately.
    • The measurement uncertainty of the torque measuring device is only 0.5% of the measuring range.
    PCE Instruments DFG N 10TW - Torque Meter 1/2″ Square Socket 10 Nm
      PCE Instruments - Torque Meter 1/2″ Square Socket 10 Nm Model # DFG N 10TW

     
    • The torque wrench tester consists of a handheld measuring device and an external torque transducer.
    • The torsion transducer is connected to the hand-held device via a 1.5 m / 4.9 ft long cable and thus enables installation in a test stand or direct assembly on a test bench.
    • The torque measuring device is delivered adjusted so that the control measurements can be started immediately.
    • The measurement uncertainty of the torque measuring device is only 0.5% of the measuring range.
    PCE Instruments DFG N 50TW - Torque Meter 1/2″ Square Socket 50 Nm
      PCE Instruments - Torque Meter 1/2″ Square Socket 50 Nm Model # DFG N 50TW

     
    • The torque wrench tester consists of a handheld measuring device and an external torque transducer.
    • The torsion transducer is connected to the hand-held device via a 1.5 m / 4.9 ft long cable and thus enables installation in a test stand or direct assembly on a test bench.
    • The torque measuring device is delivered adjusted so that the control measurements can be started immediately.
    • The measurement uncertainty of the torque measuring device is only 0.5% of the measuring range.
    PCE Instruments DFG N 5TW - Torque Meter 1/2″ Square Socket 5 Nm
      PCE Instruments - Torque Meter 1/2″ Square Socket 5 Nm Model # DFG N 5TW

     
    • The torque wrench tester consists of a handheld measuring device and an external torque transducer.
    • The torsion transducer is connected to the hand-held device via a 1.5 m / 4.9 ft long cable and thus enables installation in a test stand or direct assembly on a test bench.
    • The torque measuring device is delivered adjusted so that the control measurements can be started immediately.
    • The measurement uncertainty of the torque measuring device is only 0.5% of the measuring range.
    PCE Instruments CTT 10 - Torque Meter 200mm 10 Nm
      PCE Instruments - Torque Meter 200mm 10 Nm Model # CTT 10

     
    • The torque meter for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner.
    • This measurement with the torque meter for drinking bottles is particularly important to find out whether the containers are properly closed.
    • This measuring method with the torque meter for drinking bottles is particularly necessary for the food industry. I
    • The turntable of the torque meter for drinking bottles can hold samples with a diameter between 20 and 200 mm.
    PCE Instruments CTT 2 - Torque Meter 200 mm 2 Nm
      PCE Instruments - Torque Meter 200 mm 2 Nm Model # CTT 2

     
    • The torque meter for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner.
    • This measurement with the torque meter for drinking bottles is particularly important to find out whether the containers are properly closed.
    • This measuring method with the torque meter for drinking bottles is particularly necessary for the food industry.
    • The turntable of the torque meter for drinking bottles can hold samples with a diameter between 20 and 200 mm.
    PCE Instruments CTT 5 - Torque Meter 200 mm 5 Nm
      PCE Instruments - Torque Meter 200 mm 5 Nm Model # CTT 5

     
    • The torque meter for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner.
    • This measurement with the torque meter for drinking bottles is particularly important to find out whether the containers are properly closed.
    • This measuring method with the torque meter for drinking bottles is particularly necessary for the food industry.
    • The turntable of the torque meter for drinking bottles can hold samples with a diameter between 20 and 200 mm.
    PCE Instruments TM 80 - Digital Torque Meter 0 to 147 Ncm
      PCE Instruments - Digital Torque Meter 0 to 147 Ncm Model # TM 80

     
    • The Digital Torque Meter PCE-TM 80 with external sensor to measure the static or startup torque moment in screws, components, switches, transmission shafts, etc.
    • The Digital Torque Meter PCE-TM 80 is an affordable solution to easily perform static torque measurements.
    • The Digital Torque Meter PCE-TM 80 operates by rotatory movements to the left and right and it is ideal for the torque moment.
    • The Digital Torque Meter PCE-TM 80 offers the option to enlarge the 1 digit resolution.

    Provide us your contact details one of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







      *Demonstrations can only be scheduled within the UAE