AABTools | PCE Instruments | Insulation Testers

PCE Instruments - Auto Ranging Insulation Tester 1000V Model # IT 120

The insulation measuring device PCE-IT 120 detects insulation resistance up to max. 8 GΩ (with auxiliary voltages of 250, 500 and 1000V) and offers a measuring function for DC and AC voltages up to max. 950V DC and 700V AC as well as resistors up to max. 2 kΩ.
A continuity tester with beep is integrated. Furthermore, the insulation meter can be used to check the polarization index and the dielectric ratio.
The measured values can be recorded at the touch of a button in the OLED display of the insulation tester. The device complies with DIN 57 411 part 1 / VDE 0411 part 1, protective measures for electronic measuring instruments (IEC1010-1) and DIN VDE 0413 (insulation tester).

PCE Instruments - Insulation Tester 1000V Model # IT100

The insulation tester PCE-IT100 detects with auxiliary voltages of 125V, 250V, 500V and 1000V insulation resistors up to max. 4000 MΩ.
Furthermore, the measurement of low-resistance resistors up to 400 Ω and a measurement function for alternating and also DC voltages is offered by this insulation tester.
Continuity tester with a beep is also part of the equipment of the insulation meter. In addition to a data-hold function for holding the current measured value, the max. Or min.
Value, in the insulation tester, can also be recorded during voltage and low-ohm measurement.

PCE Instruments - Insulation Tester 5000V Model # IT413

The PCE-IT413 Insulation Meter belongs to a series of highly accurate resistance devices that have a 6 digit display.
These Insulation Meters have been developed specifically for technical service and for difficult measurement conditions.
One of the advantages is the built in protection to avoid errors originating from loss of current.
The Insulation Meter contains a microprocessor and both optical and visual alarms.

PCE Instruments - Insulation Tester 10000V Model # IT414

The PCE-IT414 Insulation Meter belong to a series of highly accurate resistance devices that have a 6 digit display.
These Insulation Meters have been developed specifically for technical service and for difficult measurement conditions.
One of the advantages is the built in protection to avoid errors originating from loss of current.
The Insulation Meter contains a microprocessor and both optical and visual alarms. Factory calibration ensures the most accurate measurements with this series of Insulation Meters

PCE Instruments - Insulation Multimeter 1000V Model # ITM 20

This insulation tester PCE-ITM 20 combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this insulation tester PCE-ITM 20 is also equipped with a frequency and capacitance measurement.
Automatic range selection (Autorange) allows fast and safe operation with the insulation tester, while the large backlit LCD display ensures good readability. The highlight of this isolation multimeter is the integrated insulation tester.
With test voltages of up to 1000 V, insulation resistances of up to 5000 MΩ (5 GΩ) are measured. Likewise, the insulation tester can directly measure the PI and DAR value.

PCE Instruments - Insulation Resistance Meter AC/DC 750V / 1000V Model # IT55

The Isolation Meter PCE-IT55 determines insulation resistance up to a maximum of 2000 MΩ (for auxiliary voltages of 250, 500, and 1000V).
This Isolation Meter also offers the ability to measure alternate and continuous currents up to a maximum 750V / 1000V and resistance up to 2 kΩ.
The Isolation Meter meets these standards: DIN 57 411 part 1 / VDE 0411 part 1, protective measures for electronic devices (IEC1010-1) and DIN VDE 0413 (Electrical Tester).

PCE Instruments Insulation Testers