• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • PCE Instruments Basic Clamp Meters



    Categories

    PCE Instruments HDC 10 - Clamp Meter
      PCE Instruments - Clamp Meter Model # HDC 10

     
    • Currents up to 400 A AC
    • Voltages up to 600 V AC / DC
    • Auto-Range
    PCE Instruments CM 3 - Clamp Meter
      PCE Instruments - Clamp Meter Model # CM 3

     
    • The fork current clamp PCE-CM 3 is used for quick and easy AC measurements. For current measurement, the fork current clamp is placed over the current-carrying conductor.
    • It is particularly suitable for the measurement of AC in distributions and wherever circuits must not be interrupted. The current measuring range extends from 0 – 200 A.
    • In addition to the current measurement, the fork current clamp can be used to measure DC and AC voltages up to 600V, resistance, capacitance and even temperatures. The measured values ​​are displayed on the illuminated display of the fork current clamp.
    PCE Instruments DC3 - Clamp Meter
      PCE Instruments - Clamp Meter Model # DC3

     
    • This clamp meter was developed for the indirect measurement of AC/DC currents with high resolution. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this clamp meter.
    • The small dimensions of this amperage clamp enable it to be used in places that are difficult to access.
    • The large, illuminated display of these measuring clamps ensures very good readability even in dark locations, such as in switch cabinets and cable ducts.
    PCE Instruments LCT 1 - Digital Clamp Meter 0 to 600 V
      PCE Instruments - Digital Clamp Meter 0 to 600 V Model # LCT 1

     
    • With the PCE-LCT 1 Voltmeter it is possible to measure leakage currents up to a range of 100 A. PCE-LCT 1 Voltmeter can measure leakage currents which appear when current flows through electrical conductors which are not designed for conduction current.
    • The PCE-LCT 1 Voltmeter can detect leakage currents and show them on the display. With the help of the PCE-LCT 1 Voltmeter you can detect insulation failures in places where machines cannot be disconnected, however insulation must be checked, as for instance according to the VDE 701/702 standard.
    • The PCE-LCT 1 Voltmeter measures current flow, voltage up to 600 V, resistance and continuity. The PCE-LCT 1 is the ideal instrument for electricians according to the VDE standard.
    PCE Instruments CM 5 - Current Clamp Meter AC 0 to 200 AC
      PCE Instruments - Current Clamp Meter AC 0 to 200 AC Model # CM 5

     
    • The digital multimeter is a multimeter with a multitude of different functions. Thus, with the digital multimeter, current measurements up to 200 A AC can be carried out without contact.
    • Thanks to the contactless current measurements of the digital multimeter can be measured during operation. Thus, no measurement preparation must be made with the digital multimeter, since it is possible to measure directly on the line to be measured.
    • Another contactless feature of the digital multimeter is the NCV (Not Connected Voltage) measurement. In this measurement, the digital multimeter can indicate whether a voltage is applied to a line.
    PCE Instruments DC 10 - Clamp Meter AC/DC 600 V
      PCE Instruments - Clamp Meter AC/DC 600 V Model # DC 10

     
    • The digital multimeter is an ideal measuring device for the fast measurement of currents and voltages. To perform current measurements, a digital multimeter must be connected in series to the load.
    • With this digital multimeter, current measurements directly on the supply line can be performed inductively without disconnecting them to switch on a digital multimeter. Thanks to this inductive current measurement, the risk of electric shock is drastically reduced because the operator has no direct contact with the supply line thanks to the digital multimeter.
    • In addition to current measurement of up to 600 A AC, the digital multimeter can also measure voltages up to 600V AC / DC, resistors, capacitances and the voltage network frequencies.
    PCE Instruments DC 41 - Clamp Meter AC/DC 600 A/V
      PCE Instruments - Clamp Meter AC/DC 600 A/V Model # DC 41

     
    • The voltmeter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the voltmeter, or you can use the integrated clamp mechanism.
    • By using the clamp of the voltmeter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it. You can also check the continuity with the voltmeter.
    • Due to its compact design and light weight, the device is well-suited for mobile use. When using the clamp mechanism, it is also possible to run the voltmeter with one hand only.
    PCE Instruments LCT 3 - Clamp Meter AC 150 A
      PCE Instruments - Clamp Meter AC 150 A Model # LCT 3

     
    • The multimeter is the ideal measuring instrument to measure leakage currents. This is made possible by the extensive measuring range of the multimeter.
    • Also, current measurements up to 150 A AC can be made with the multimeter. To test supply lines with a current of up to 150 A, the multimeter for the corresponding cable cross-section can be opened up to 30 mm.
    • In addition to the current measurement, the multimeter can also measure voltages up to 600V directly. Because of the current and voltage measurement, the multimeter is the perfect measuring instrument to carry out measurements and analyzes on, for example, three-phase networks.
    PCE Instruments PCM 3 - Single-Phase Clamp Meter AC 1000 A
      PCE Instruments - Single-Phase Clamp Meter AC 1000 A Model # PCM 3

     
    • With the digital multimeter AC currents of up to 1000 A AC can be measured easily. At the same time, voltages of up to 1000V AC / DC can be measured with the digital multimeter. Thus, with the power current clamp, apparent power, reactive power and active power measurements up to 750 KW are possible.
    • Another function of the digital multimeter is the measurement of the inrush current. Many consumers have a tremendously high current at the moment of switch-on. With a conventional digital multimeter such a measurement is not possible. For the digital multimeter this is not a problem.
    • With the NCV (Not Connected Voltage) function of the digital multimeter, it can be checked whether a voltage is applied to a line without performing a contacting measurement. This makes the work much easier for the user thanks to the digital multimeter.
    PCE Instruments OCM 10 - Current Clamp Meter 600A
      PCE Instruments - Current Clamp Meter 600A Model # OCM 10

     
    • The current clamp PCE-OCM 10 is characterized by the OLED display. The OLED display on this clamp makes it possible to read the display even in the dark, as it is self-luminous.
    • The current clamp measures DC and AC up to 600 A. In addition to the regular current measurement, the PCE-OCM 10 current clamp can be used to measure start-up currents.
    • AC voltage can be measured up to 750V AC and DC voltage even up to 1000V. Furthermore, the current clamp has the standard multimeter functions such as resistance measurement, diode test, capacitance measurement, continuity test, etc.

    Provide us your contact details one of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







    *Demonstrations can only be scheduled within the UAE