• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • GROZ Precision Measuring Tools

    Shop our selection of GROZ from our retail outlets across dubai & UAE



    Categories

      GROZ VNC/6 - Vernier Caliper 0 to 6in (0-150mm)
        GROZ - Vernier Caliper 0 to 6in (0-150mm) Model # VNC/6

       
      • Useful for inside and outside measurements, depth & step measurements
      • Hardened stainless steel construction in satin chrome finish
      • Vernier scale etched with permanent black graduations allows precise & convenient reading
      GROZ VNC/8 - Vernier Caliper 0 to 8in (0-200mm)
        GROZ - Vernier Caliper 0 to 8in (0-200mm) Model # VNC/8

       
      • Useful for inside and outside measurements, depth & step measurements
      • Hardened stainless steel construction in satin chrome finish
      • Vernier scale etched with permanent black graduations allows precise & convenient reading
      GROZ VNC/12 - Vernier Caliper 0 to 12in (0-300mm)
        GROZ - Vernier Caliper 0 to 12in (0-300mm) Model # VNC/12

       
      • Useful for inside and outside measurements, depth & step measurements
      • Hardened stainless steel construction in satin chrome finish
      • Vernier scale etched with permanent black graduations allows precise & convenient reading
      GROZ DLC/150 - Dial Caliper 0-150mm
        GROZ - Dial Caliper 0-150mm Model # DLC/150

       
      • Vernier Calipers with a large & clear dial read off
      • Hardened stainless steel construction in satin chrome finish
      • Vernier scale etched with permanent black graduations allows precise & convenient reading
      GROZ DLC/200 - Dial Caliper; 0-200mm
        GROZ - Dial Caliper; 0-200mm Model # DLC/200

       
      • Vernier Calipers with a large & clear dial read off
      • Hardened stainless steel construction in satin chrome finish
      • Vernier scale etched with permanent black graduations allows precise & convenient reading
      GROZ EDC/6 - Electronic Caliper; 0-6in (0-150mm)
        GROZ - Electronic Caliper; 0-6in (0-150mm) Model # EDC/6

       
      • Freewheeling thumb roller mechanism for smooth movement along the linear scale
      • Convenient to use locking screw to set calipers at any desired position
      • Measurement can be zero set at any position along the scale for incremental measurements
      GROZ EDC/8 - Electronic Caliper; 0-8in ( 0-200mm)
        GROZ - Electronic Caliper; 0-8in ( 0-200mm) Model # EDC/8

       
      • Freewheeling thumb roller mechanism for smooth movement along the linear scale
      • Convenient to use locking screw to set calipers at any desired position
      • Measurement can be zero set at any position along the scale for incremental measurements
      GROZ EDC/12 - Electronic Caliper; 0-12in (0-300mm)
        GROZ - Electronic Caliper; 0-12in (0-300mm) Model # EDC/12

       
      • Freewheeling thumb roller mechanism for smooth movement along the linear scale
      • Convenient to use locking screw to set calipers at any desired position
      • Measurement can be zero set at any position along the scale for incremental measurements
      GROZ MM/0-25 - Outside Micrometer, 0 – 25mm
        GROZ - Outside Micrometer, 0 – 25mm Model # MM/0-25

       
      • Steel frame prevents flexing ensuring greater accuracy in measurement. Can be operated efficiently with one hand
      • Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time
      • Hardened spindle with precisely cut threads for smooth movement and high accuracy
      GROZ MM/25-50 - Outside Micrometer; 25 – 50mm
        GROZ - Outside Micrometer; 25 – 50mm Model # MM/25-50

       
      • Steel frame prevents flexing ensuring greater accuracy in measurement. Can be operated efficiently with one hand
      • Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time
      • Hardened spindle with precisely cut threads for smooth movement and high accuracy
      GROZ MM/75-100 - Outside Micrometer; 75 – 100mm
        GROZ - Outside Micrometer; 75 – 100mm Model # MM/75-100

       
      • Steel frame prevents flexing ensuring greater accuracy in measurement. Can be operated efficiently with one hand
      • Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time
      • Hardened spindle with precisely cut threads for smooth movement and high accuracy
      GROZ MM/0-100/ST4 - Outside Micrometer Set 4pcs; 0-100mm
        GROZ - Outside Micrometer Set 4pcs; 0-100mm Model # MM/0-100/ST4

       
      • Steel frame prevents flexing ensuring greater accuracy in measurement. Can be operated efficiently with one hand
      • Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time
      • Hardened spindle with precisely cut threads for smooth movement and high accuracy
      GROZ MM/0-150/ST6 - Outside Micrometer Set 6pcs; 0-150mm
        GROZ - Outside Micrometer Set 6pcs; 0-150mm Model # MM/0-150/ST6

       
      • Steel frame prevents flexing ensuring greater accuracy in measurement. Can be operated efficiently with one hand
      • Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time
      • Hardened spindle with precisely cut threads for smooth movement and high accuracy
      GROZ MMED/1 - Electronic Micrometer; 0-1in (0-25mm); IP54
        GROZ - Electronic Micrometer; 0-1in (0-25mm); IP54 Model # MMED/1

       
      • Superior tool designed to measure, record & display dimensions in inches & mm
      • Extra large, high contrast LCD digital read out
      • Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time
      GROZ CSQ/12/4/ST - Combination Square Set 4pcs; 12in/300mm
        GROZ - Combination Square Set 4pcs; 12in/300mm Model # CSQ/12/4/ST

       
      • An exceptional set which combines several tools, substituting the use of try squares, miter, depth gauge, height gauge, marking gauge, level, plumb & a precision rule
      • Constructed from Quality Cast Iron & complete with precision rule 12″ (300 mm) long
      • Center Head: Used for accurately locating center of a cylindrical or square work piece
      GROZ DLG/10 - Dial Indicator; 0-10mm; AGD2
        GROZ - Dial Indicator; 0-10mm; AGD2 Model # DLG/10

       
      • Each revolution is indicated by a revolution counter
      • 8mm stem diameter for metric models and 3/8″ for inch sizes
      • Robust construction, mechanical dial indicator with bottom plunger
      GROZ DGI/1 - Digital Indicator;  0-12.5mm/0-0.5in
        GROZ - Digital Indicator; 0-12.5mm/0-0.5in Model # DGI/1

       
      • A very versatile range of digital indicators available in two levels of precision – Standard & High Accuracy
      • Suitable for both inch & metric measurements
      • Useful for absolute & tolerance measurement which allows for measure of upper & lower tolerances
      GROZ MB/30 - Articulating Arm; W/M. Base Type1; 180mm
        GROZ - Articulating Arm; W/M. Base Type1; 180mm Model # MB/30

       
      • Equipped with convenient ON/OFF control switch
      • Three precision ground magnetic surfaces allow these to be used horizontally, vertically or even upside down
      • Articulating arm type: 3 articulating joints lockable using a single knob. Suitable for 3/8” & 8 mm stems & test indicators with dovetail clamping mechanism
      GROZ ID/10 - Inside Caliper 10in / 250mm
        GROZ - Inside Caliper 10in / 250mm Model # ID/10

       
      • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
      • Dividers are used for marking out circles on steel or transferring measurement from master templates
      • Adjustment is made by opening and closing of the legs by means of an adjusting nut
      GROZ ID/6 - Inside Caliper  6in / 150mm
        GROZ - Inside Caliper 6in / 150mm Model # ID/6

       
      • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
      • Dividers are used for marking out circles on steel or transferring measurement from master templates
      • Adjustment is made by opening and closing of the legs by means of an adjusting nut
      GROZ ID/8 - Inside Caliper 8in / 200mm
        GROZ - Inside Caliper 8in / 200mm Model # ID/8

       
      • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
      • Dividers are used for marking out circles on steel or transferring measurement from master templates
      • Adjustment is made by opening and closing of the legs by means of an adjusting nut
      GROZ OD/10 - Outside Caliper 10in / 250mm
        GROZ - Outside Caliper 10in / 250mm Model # OD/10

       
      • Adjustment is made by opening and closing of the legs by means of an adjusting nut
      • Divider points are hardened 50-55 HRC for increased wear resistance
      • The legs pivot on a roller and are tensioned by bow spring. The fulcrum stud has a large bearing surface that prevents side deflection of legs
      GROZ OD/12 - Outside Caliper 12in / 300mm
        GROZ - Outside Caliper 12in / 300mm Model # OD/12

       
      • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
      • Dividers are used for marking out circles on steel or transferring measurement from master templates
      • The legs pivot on a roller and are tensioned by bow spring. The fulcrum stud has a large bearing surface that prevents side deflection of legs
      GROZ OD/6 - Outside Caliper 6in / 150mm
        GROZ - Outside Caliper 6in / 150mm Model # OD/6

       
      • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
      • Dividers are used for marking out circles on steel or transferring measurement from master templates
      • Adjustment is made by opening and closing of the legs by means of an adjusting nut
      GROZ OD/8 - Outside Caliper 8in / 200mm
        GROZ - Outside Caliper 8in / 200mm Model # OD/8

       
      • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
      • Dividers are used for marking out circles on steel or transferring measurement from master templates
      • Adjustment is made by opening and closing of the legs by means of an adjusting nut
      GROZ ID/12 - Inside Caliper 12in / 300mm
        GROZ - Inside Caliper 12in / 300mm Model # ID/12

       
      • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
      • Dividers are used for marking out circles on steel or transferring measurement from master templates
      • Adjustment is made by opening and closing of the legs by means of an adjusting nut
      GROZ DD/6 - Spring Divider  6″ / 150mm
        GROZ - Spring Divider 6″ / 150mm Model # DD/6

       
      • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
      • Dividers are used for marking out circles on steel or transferring measurement from master templates
      • Adjustment is made by opening and closing of the legs by means of an adjusting nut
      GROZ DD/8 - Spring Divider  8in / 200mm
        GROZ - Spring Divider 8in / 200mm Model # DD/8

       
      • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
      • Dividers are used for marking out circles on steel or transferring measurement from master templates
      • Adjustment is made by opening and closing of the legs by means of an adjusting nut
      GROZ WCF/WZ-6 - Center Finder Contour Set 4Pc Set
        GROZ - Center Finder Contour Set 4Pc Set Model # WCF/WZ-6

       
      • Wiggler with Disc Contact is particularly useful in locating work in confined areas such as slots or shallow holes. Diameter of Disc. 0.1″
      • Wiggler with Offset Indicator holder is useful for checking run out or concentricity and in checking straightness or alignment of flat surfaces
      • Wiggler with Ball Contact is useful in locating work by first bringing the ball contact against the work and then indexing it to the desired position relative to the spindle

      Provide us your contact details one of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

      Product selected: Model #







        *Demonstrations can only be scheduled within the UAE