• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • Create a Requisition

    FLUKE BT510 Battery Analyzer 15.1 x 12.5 x 9.6 inches

    # BT510

    • Battery Internal Resistance / Impedance
    • Battery Voltage – During the internal resistance test, Fluke Battery Analyzers also measure the voltage of the battery under test
    • Discharge Volts
    FLUKE
    • FLUKE
    • BT510

    Quantity:

    - +
      ADD TO MY TOOLBOX
    Where to buy this product?

    Features

    • Battery Internal Resistance / Impedance
    • Battery Voltage – During the internal resistance test, Fluke Battery Analyzers also measure the voltage of the battery under test
    • Discharge Volts – The Discharge mode collects the voltage of each battery multiple times at a user defined interval during a discharge or load test. Users can calculate the time a battery takes to drop to the cut-off voltage and use this time to determine the capacity loss of the battery
    • Ripple Voltage Test – Measures unwanted residual ac component of the rectified voltage in dc charging and inverter circuits. Allows users to test ac components in dc charging circuits and find one of the root causes of battery deterioration
    • Meter and Sequence Modes – The Meter mode is used for a quick test or troubleshooting. In this mode you can save and read the readings in a measurement or time sequence. The Sequence mode is for maintenance tasks with multiple power systems and battery strings. Before a task starts, users can configure a profile for the task for data management and report generation
    • Threshold and Warning – Users can configure a maximum of 10 sets of thresholds and receive a Pass/ Warning/ Fail indication after each measurement
    • Intercell Strap Resistance Test and Data Management – Measures the resistance of the intercell connection between batteries in a string
    • Comprehensive logging – All measured values are automatically captured during testing and can be reviewed on the instrument before downloading for on the-go analysis
    • Fluke Battery Management Software – Easily import data from the Product to a PC. The measurement data and battery profile information is stored and archived with the Management Software and can be used for comparison and trend analysis. All measurement data, battery profile and analysis information can be used to easily generate reports

    Applications

    • UPS Maintenance
    • Substation DC Power Maintenance
    • Wind Turbine Pitch and Yaw motor DC power maintenance
    • Elevator UPS maintenance
    • Manufacturing production line critical power maintenance
    • DCS control room DC power maintenance
    • Cell tower DC power maintenance
    • Data center critical power UPS maintenance
    Functions Range Resolution Accuracy BT510 BT520 BT521
    Battery resistance1 3 mΩ 0.001 mΩ 1 % + 8
    30 mΩ 0.01 mΩ 0.8 % + 6
    300 mΩ 0.1 mΩ 0.8 % + 6
    3000 mΩ 1 mΩ 0.8 % + 6
    Vdc 6 V 0.001 V 0.09 % + 5
    60 V 0.01 V 0.09 % + 5
    600 V 0.1 V 0.09 % + 5
    1000 V 1 V 0.09 % + 5
    Vac (45 Hz to 500 Hz with 800 Hz filter) 600 V 0.1 V 2 % + 10
    Frequency (displayed with Vac and Aac)2 500 Hz 0.1 Hz 0.5 % + 8
    AC voltage ripple (20 KHz Max) 600 mV 0.1 mV 3 % + 20
    6000 mV 1 mV 3 % + 10
    Adc/Aac (with accessory Fluke i410) 400 A 1 A 3.5 % + 2
    Temperature 0 °C to 60 °C 1 °C 2 °C (4 °F)
    Meter mode 999 records for each measurement position with time stamp
    Sequence mode Up to 100 profiles and 100 profile templates (Each profile stores up to 450 batteries) with time stamp

    1The measurement is based on ac injection method. The injected source signal is <100 mA, 1 kHz.
    2 Trigger level VAC: 10 mV, Aac: 10 A

    BT510 BT520 BT521
    Resistance (mΩ)
    Battery voltage
    Voltage dc
    Voltage ac and frequency (Hz)
    Ripple volt
    Temperature of negative battery post
    DC and ac current (and frequency)
    DMM mode
    Sequence mode
    Discharge measurement mode
    Automatic measurement save
    Wireless communication
    Memory view
    Size (HxWxD) 22 cm x 10.3 cm x 5.8 cm (9 in x 4 in x 2 in)
    Weight 850 g (1.9 lb)
    Screen dimensions 7.7 cm x 5.6 cm (3 in x 2.2 in)
    Interface USB mini
    Operating temperature 0 °C to 40 °C
    Storage temperature -20 °C to 50 °C
    Lithium-ion battery charging temperature 0 °C to 40 °C
    Operating humidity Non-condensing (10 °C)
    <=80 % RH (at 10 °C to 30 °C)
    <=75 % RH (at 30 °C to 40 °C)
    Operating altitude Sea level to 2000 meters
    Storage altitude Sea level to 12,000 meters
    IP rating IP40
    Radio FCC Class A
    Vibration requirements MIL-PRF-28800F: Class 2
    Drop test requirements 1 meter
    Temperature coefficients Add 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C
    Safety compliance 600 V CAT III
    EMC IEC 61326
    ROHS China, Europe
    Protection Class 2 Pollution Degree II
    Battery compliance UN38.3
    UL2054
    IEC62133
    2G per IEC68-2-26, 25G, and 29
    • Battery analyzer
    • 4-wire test pin (set)
    • BTL10 Basic Test Lead (set)
    • TL175 TwistGuardª Test Leads with adapter
    • BP500 lithium-ion battery
    • BC500 AC charger
    • Mini-USB cable
    • Shoulder strap
    • Belt strap
    • Magnetic hanging strap
    • FlukeView¨ Battery Management Software
    • Soft carrying case
    • Spare fuses (2)
    • Zero Ohm Calibration Resistor

    Explore More in Battery Analyzers

    Provide us your contact detailsone of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







    *Demonstrations can only be scheduled within the UAE