EXTECH AN200 CFM/CMM Thermo-AnemoMeter

Model # AN200

Built-in non-contact IR Thermometer measures remote surface temperatures to 500°F (260°C) with 8:1 distance to spot ratio and Laser Pointer.
This CFM/CMM Thermo-Anemometer can simultaneously display of Air Flow or Air Velocity plus Ambient Temperature.

CFM/CMM Thermo- Anemometer with built-in non-contact IR Thermometer measures remote surface temperatures to 500°F (260°C) with 8:1 distance to spot ratio and Laser Pointer
Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature
Easy to set Area dimensions (ft² or m²) are stored in the meter’s internal memory for the next power on
Resolution of 0.01m/sec
20 point average for Air Flow
Large (9999 count) LCD Backlit Display
3% velocity accuracy via low friction 2.83″D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable
Complete with vane sensor with 3.9ft (120cm) cable, 9V battery, and protective rubber holster

Specifications	Range	Resolution	Basic Accuracy
Air Velocity	0.40 to 30.00 m/s	0.01 m/s	±3% m/s
	1.4 to 108.0 km/h	0.1 km/h	±3% km/h
	80 to 5906 ft/min	1 ft/min	±3% ft/min
	0.9 to 67.2 mph	0.1 mph	±3% mph
	0.8 to 58.3 knots	0.1 knots	±3% knots
Air Temperature	14 to 140˚F (-10 to 60˚C)	0.1˚F/˚C	±6.0˚F (3˚C)
InfraRed Temperature	-58 to -4˚F (-50 to -20˚C)	0.1˚F/˚C	±9.0˚F (5.0˚C)
InfraRed Temperature	-4 to 500˚F (-20 to 260˚C	1˚F/˚C	±2% reading or ±2˚F (˚C) whichever is greater
Airflow	0 to 999,999 CMM (m3 /min)	0.1
Airflow	0 to 999,999 CFM (ft 3 /min)	0.1
Dimensions/Weight	7 x 2.9 x 1.3″ (178 x 74 x 33mm)/1.6lbs (700g)