• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • PCE Instruments PVS 10 - Acceleration Sensor
      PCE Instruments - Acceleration Sensor Model # PVS 10

     
    • It can be operated with a voltage of 12 to 24 V DC.
    • Horizontal or vertical installation
    • Process signal output
    • MIL-C-5015 connector
    • M6 process connection
    PCE Instruments PVS 20 - Acceleration Sensor
      PCE Instruments - Acceleration Sensor Model # PVS 20

     
    • Horizontal or vertical installation
    • Process signal output
    • MIL-C-5015 connector
    • M6 process connection
    PCE Instruments PVS 30 - Acceleration Sensor
      PCE Instruments - Acceleration Sensor Model # PVS 30

     
    • Horizontal or vertical installation
    • Process signal output
    • MIL-C-5015 connector
    • M6 Process connection
    PCE Instruments HAV 100 - Accelerometer / Vibration Meter with Software
      PCE Instruments - Accelerometer / Vibration Meter with Software Model # HAV 100

     
    • Hand-Arm Vibration analysis
    • 10 hours of battery life
    • General vibration measurement
    • Data memory for later evaluations
    PCE Instruments VDL 16I - Accelerometer / Shock Datalogger
      PCE Instruments - Accelerometer / Shock Datalogger Model # VDL 16I

     
    • 3-axis Acceleration up to 800 Hz
    • For temperature, humidity, air pressure and light
    • 32 GB SD memory card
    PCE Instruments VDR 10 - Accelerometer
      PCE Instruments - Accelerometer Model # VDR 10

     
    • Measures acceleration (m/s, g, ft/s) and speed (mm/s, cm/s, in/s)
    • Adjustable automatic data logging
    • RS-232 and USB interface
    • Data can be downloaded to a computer and analyzed using Microsoft Excel
    PCE Instruments S 41 - Vibration Meter 100 Hz to 10 kHz
      PCE Instruments - Vibration Meter 100 Hz to 10 kHz Model # S 41

     
    • The PCE-S 41 Vibration Meter is battery powered and easy to use. This Vibration Meter can be used for detecting noise in machine components, such as gears, valves, vents and pumps.
    • This makes the Vibration Meter a useful tool in inspecting noise and vibration, giving the maintenance team the chance to locate the source of a problem before it becomes too costly. The enclosure of the Vibration Meter is made of ABS plastic which is comfortable to hold and operate.
    • The device uses a piezoelectric transducer which can detect very low resonant noises. The earpiece is equipped with an adjustable headset that has a 2 m cable.
    PCE Instruments S 42 - Vibration Meter 30 Hz to 15 KHz with Headphones
      PCE Instruments - Vibration Meter 30 Hz to 15 KHz with Headphones Model # S 42

     
    • The automotive-testing mechanics stethoscope PCE-S 42 is designed for listening to individual machine parts, which enables you to carry out maintenance and repair work using the machine stethoscope.
    • The use of a machine stethoscope thus makes it easier to listen to sound phenomena in bearings and motors. This makes it possible to amplify noises that imply that the machine is slightly damaged, which can cause severe impairments and damage to the machine if not observed.
    • The machine stethoscope comes with headphones the shape of which is adapted to the human head and thus is perfectly suitable to be used in noisy environments. The big, padded earpieces have a noise-suppressing effect and at the same time offer wearing comfort.
    PCE Instruments VD 3 - Vibration Analyzer 0 to 60 Hz with FFT Analysis
      PCE Instruments - Vibration Analyzer 0 to 60 Hz with FFT Analysis Model # VD 3

     
    • The PCE-VD 3 Vibration Analyser is a miniaturized universal Vibration Analyser with an included built-in three-axes acceleration sensor (X, Y, Z axis). The internal sensor of the PCE-VD 3 Vibration Analyser measures acceleration force along the X, Y, and Z axes with a measurement range of ±16 g per axis.
    • The PCE-VD 3 Vibration Analyser can be placed anywhere due to its robust and magnetic bracket. Moreover, due to its small size and lightweight, the Vibration Analyser can be used for many different applications, such as shipment control, sports, medicine, or for any application requiring the recording of movements of 1 to 3 axes.
    • The PCE-VD 3 Vibration Analyser can be easily programmed through the included software. All data can be sent to a PC or laptop via the USB port easily and quickly.
    PCE Instruments VDL 24I - 3-Axis Vibration Analyzer 0 to 1600 Hz
      PCE Instruments - 3-Axis Vibration Analyzer 0 to 1600 Hz Model # VDL 24I

     
    • The vibration analyzers of the PCE-VDL series are available in two versions. The vibration analyzer PCE-VDL 16I contains sensors for the following physical units: temperature, humidity, air pressure, light and 3-axis acceleration.
    • The PCE-VDL 24I has 3-axis acceleration and the max. sampling rate of the acceleration sensor is 1600 Hz. With the vibration analyzer PCE-VDL 24I the acceleration sensor is even delivered with a sampling rate of 1600 Hz.
    • The shock and vibration logger is therefore ideally suited for use in fault diagnosis, stress testing, machine inspection, shock measurements and preventive maintenance.
    PCE Instruments VM 20 - Vibration Meter 0.5 to 15,000 Hz
      PCE Instruments - Vibration Meter 0.5 to 15,000 Hz Model # VM 20

     
    • The vibration measuring device PCE-VM 20 is a compact device for the direct evaluation of the vibration behavior of a machine. The device can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.
    • Thanks to the integrated real-time FFT analysis, the condition of a machine can be analyzed and determined during the measurement.
    • The PCE-VM 20 vibration meter can evaluate and display signals from IEPE standard piezoelectric vibration sensors as well as piezoelectric vibration sensors with charge output.
    PCE Instruments VM 5000 - 4-Channel Vibration Analyzer 10 Hz to 1 KHz
      PCE Instruments - 4-Channel Vibration Analyzer 10 Hz to 1 KHz Model # VM 5000

     
    • The 4-channel PCE-VM 5000 Vibration Analyzer is especially designed for precise measurements of vibrations. Despite the fact that the 4-channel vibration Vibration Meter is a complex and sensitive device, its hardened design enables operation for many years.
    • The PCE-VM 5000 Vibration Meter indicates a large, lighted LCD display for four channels of simultaneous vibration measurements from remote vibration sensors. The Vibration Meter measures in a frequency range of 10 Hz to 1 KHz for speed, acceleration, and displacement.
    • The captured data values are saved on a SD memory card where you can choose between automatic and manual data storage. By means of the SD memory card the data can be transferred afterwards to a computer in order to analyze it in an excel file.
    PCE Instruments VMS 504 - Vibration Analyzer 5 Hz to 10 kHz
      PCE Instruments - Vibration Analyzer 5 Hz to 10 kHz Model # VMS 504

     
    • The wireless PCE-VMS 504 Vibration Analyser detects vibration within an acceleration range of up to 30 g and a frequency range between 5 and 10 KHz.
    • The wireless Vibration Analyser features external vibration sensors which measure vibrations on machines and transfer those measurements wirelessly to a receiving unit. The sensors can be easily attached to a machine due to their magnetic base.
    • Not only do the sensors measure vibrations and transfer the measurements to a computer, but the sensors also recognize temperatures between -20 °C and +120 °C. While operating, the communicating server of the PCE-VMS 504 Vibration Analyser sends the measured parameters straight to a receiving unit, which then uploads the received data straight to a server.
    PCE Instruments VT 1100S - Vibration Tester 10 Hz to 1 kHz
      PCE Instruments - Vibration Tester 10 Hz to 1 kHz Model # VT 1100S

     
    • The accelerometer is used as a hand-held measuring device for the individual assessment of vibration on machines and systems. With the help of this accelerometer the actual state can easily be determined on-site.
    • Thus, corresponding changes can be made directly on site after the measurement. Thereafter, the new condition can also be assessed. Thus, the accelerometer serves as a measuring device for a relative measurement on different machines.
    • The accelerometer is essentially for precautionary or preventive maintenance of production machines. This accelerometer is used for rapid measurement of imbalance and for checking bearing and gear conditions. Very often, the accelerometer is also used to assess the status of smaller electric motors.
    PCE Instruments VT 1100 - Vibration Tester 10 Hz to 1 kHz
      PCE Instruments - Vibration Tester 10 Hz to 1 kHz Model # VT 1100

     
    • The accelerometer is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this accelerometer, the actual state can easily be determined on site.
    • Thus, corresponding changes can be made directly on site after the measurement. Thereafter, the new condition can be assessed. Thus, the accelerometer serves as a measuring device for a relative measurement on different machines.
    • The accelerometer serves essentially as precautionary or preventive maintenance of production machines.  Very often, the accelerometer is used to assess the state of smaller electric motors.
    PCE Instruments VT 1300 - Vibration Meter 1 to 15 KHz
      PCE Instruments - Vibration Meter 1 to 15 KHz Model # VT 1300

     
    • The vibration meter is a measuring device for one-hand operation. This is made possible by the built-in acceleration sensor in the vibration meter. So that the measured values ​​can be read from different angles on the vibration analyzer, the display can be rotated by the vibration meter in 0, 90, 180 and 270°.
    • The vibration meter thus graphically shows directly on the display in which area the measured value is located. As a result, the vibration meter is particularly used in quality assurance, final inspection or during maintenance work.
    • With the 10 mm attachment from the vibration meter, a wide variety of machines can be checked for the vibration level. With the 45 mm / 1.8 in needle tip from the vibration meter, even hard-to-reach measuring points can be reached on industrial sites.
    PCE Instruments VT 1300S - Vibration Meter 1 to 15 KHz
      PCE Instruments - Vibration Meter 1 to 15 KHz Model # VT 1300S

     
    • The accelerometer is a measuring device for one-hand operation. This is made possible by the built-in acceleration sensor in the vibration meter. So that the measured values ​​can be read from different angles on the vibration analyzer, the display can be rotated by the vibration meter in 0, 90, 180 and 270°.
    • The vibration meter thus graphically shows directly on the display in which area the measured value is located. As a result, the vibration meter is particularly used in quality assurance, final inspection or during maintenance work.
    • With the 10 mm attachment from the vibration meter, a wide variety of machines can be checked for the vibration level. With the 45 mm / 1.8 in needle tip from the vibration meter, even hard-to-reach measuring points can be reached on industrial sites.
    PCE Instruments VT 204 - 3-Axis Vibration Meter 10 Hz to 1 kHz
      PCE Instruments - 3-Axis Vibration Meter 10 Hz to 1 kHz Model # VT 204

     
    • PCE-VT 204 is a multifunction handheld accelerometer device with the ability to accurately measure both rotation and vibration. An ideal tool for the testing and inspection of machine parts and components such as motors, transmissions, gears, gear boxes and wheels, this multi-purpose instrument measures revolutions per minute (RPMs) as well as three-axis vibration, i.e., velocity or speed, displacement and acceleration.
    • The accelerometer sensor can be set flat, equipped with a magnet or combined with the included fastening screw to make contact with a surface during vibration measurement. Internal frequency filters eliminate the effects of background noise, allowing the device to detect specific vibrations.
    PCE Instruments VT 2800 - Vibration Analyzer 10 Hz to 1 KHz
      PCE Instruments - Vibration Analyzer 10 Hz to 1 KHz Model # VT 2800

     
    • The PCE-VT 2800 measures acceleration, oscillation speed and shift of vibrating parts, machines and equipment. The device features an integrated data logger to record vibration measurements over time.
    • Measurement data is stored on an SD card memory and can be transferred directly to a PC via USB or RS-232 interface.
    • The device also includes features such as the data hold and data release functions (accessed in RMS mode), allowing you to freeze displayed values and show maximum and minimum values respectively.
    PCE Instruments VT 3700 - Vibration Meter 10 Hz to 24 kHz
      PCE Instruments - Vibration Meter 10 Hz to 24 kHz Model # VT 3700

     
    • The accelerometer is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This vibration meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display.
    • The vibration meter is equipped with a mode that allows a measurement according to ISO 10816-3 to be carried out. The vibration meter analyzes the measured values and automatically shows a good / bad evaluation on the display.
    • The vibration meter is supplied with a sensor on the spiral cable, magnet adapter, service bag and batteries. The display of the vibration meter is a colored graphic display, which makes operation easier, since all instructions and menu items are shown in plain text. The 12 languages in the menu of the vibration meter are easily switchable.
    PCE Instruments VT 3700S - Vibration Meter 10 Hz to 24 kHz
      PCE Instruments - Vibration Meter 10 Hz to 24 kHz Model # VT 3700S

     
    • The accelerometer is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This vibration meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display.
    • You can use the device to quickly and reliably detect machine imbalances which can lead to, for example, bearing damage. The vibration meter is equipped with a mode that allows a measurement according to ISO 10816-3 to be carried out. The vibration meter analyzes the measured values and automatically shows a good / bad evaluation on the display.
    • The vibration meter is supplied with a sensor on the spiral cable, magnet adapter, service bag and batteries. The display of the vibration meter is a colored graphic display, which makes operation easier, since all instructions and menu items are shown in plain text. The 12 languages in the menu of the vibration meter are easily switchable.
    PCE Instruments VT 3800 - Vibration Analyzers with External Sensor 399.9 m/s²
      PCE Instruments - Vibration Analyzers with External Sensor 399.9 m/s² Model # VT 3800

     
    • Rechargeable battery, 2.48 in LCD display
    • Data logger function
    • Automatic ISO 10816-3 evaluation
    • Measuring range up to 399.9 m/s² / 15744 in/s²
    • Hand-held device for mobile vibration measurement
    PCE Instruments VM 31-WB - Human Vibration Meter with Whole-Body Sensor
      PCE Instruments - Human Vibration Meter with Whole-Body Sensor Model # VM 31-WB

     
    • Includes whole-body sensor only – hand-arm sensor sold separately
    • Velocity, acceleration, displacement, 3 channel FFT, TEDS support
    • USB interface with Flash memory for up to 10,000 readings
    • Easy to use – ISO 8041 calibration certificate option available

    Provide us your contact details one of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







      *Demonstrations can only be scheduled within the UAE