The RIDGID K-50-8 230V (76495) Sectional Drain Cleaning Machine for 3/4″ to 4″ Drain Lines, with A-30 Cable Kit, A-17-A Adapter, A-17-B Adapter (230V) is a portable drain cleaning machine designed to clean 1 1/4 in. to 4 in. drain lines. Applications include sink, shower and floor drains. The machine is capable of running three different size cables: 5/16″, 3/8″ and 5/8″.
The K-50 machine is driven by a 1/6 HP motor that has a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord. A toggle switch provides FORWARD/OFF/REVERSE control of the motor.
The K-50 is designed to use 5/8″ diameter sectional-type cable that has a quick change coupling system for disconnecting tools. The cable is manually fed in and out of the drain and rotates at a speed of 400 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released.
The K-50 is also designed to use A-17 Adapters. Adapters will hold 5/16″ or 3/8″ continuous length cables. Rotation of the adapters is controlled by the clutch handle. The cable adapter is equipped with a quick-acting brake which immediately stops rotation of the drum when the clutch handle is pulled upward.
Powered by 300 watt motor
Voltage: 230 V
1 – 230V Sectional Drain Cleaning Machine
1 – A-17-A Adapter with 25 ft. x 5/16 in. Cable and Bulb Auger
1 – A-17-B Adapter with 35 ft. x 3/8 in. Cable and Bulb Auger
1 – A-30 Cable Kit:
1 – Six Sections of C-8 Cable, 5/8 in. x 7 1/2 ft. (45 feet)
1 – A-10 Cable Carrier
1 – T-201 Straight Auger
1 – T-202 Bulb Auger
1 – T-205 “C” Cutter
1 – T-211 Spade Cutter
1 – A-13 Coupling Pin Key
1 – A-14-6 Rear Guide Hose
1 – A-1 Left-Hand Drain Cleaning Mitt
Product selected: Model #
*Demonstrations can only be scheduled within the UAE