Demo
Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.
Toolbox
PCE Instruments TTC 30 Thermocouple Calibrator 30V DC
# TTC 30
- The thermocouple calibrator PCE-TTC 30 can be used to simulate different thermocouples as well as mV. Thus, the thermocouple calibrator can be used for many thermometers and temperature displays with thermocouple connection.
- The PCE-TTC 30 thermocouple calibrator simulates the most popular thermocouples, including K, T, S. The simulator for thermocouples has an accuracy of 0.3°C / 0.54°F, making it easy to accurately calibrate thermometers.
- In addition to direct specification of temperatures or extra-low voltages up to 250 mV, the thermocouple calibrator can be operated in ramp mode. Here, the user can decide whether the ramp should be run indefinitely or at defined intervals.
- The thermocouple calibrator PCE-TTC 30 can be used to simulate different thermocouples as well as mV. Thus, the thermocouple calibrator can be used for many thermometers and temperature displays with thermocouple connection. The PCE-TTC 30 thermocouple calibrator simulates the most popular thermocouples, including K, T, S. The simulator for thermocouples has an accuracy of 0.3°C / 0.54°F, making it easy to accurately calibrate thermometers.
- In addition to direct specification of temperatures or extra-low voltages up to 250 mV, the thermocouple calibrator can be operated in ramp mode. Here, the user can decide whether the ramp should be run indefinitely or at defined intervals. The miniature USB interface can be used to load the thermocouple calibrator. Furthermore, recorded data can be transmitted via this interface to a PC.
- Simulation and measurement mode
- Battery operation
- For thermocouples E, J, K, T, B, R, S, N, mV
- 24 V supply for current loops
- HART compatible
- Manual mode & ramp function
- Continuity test
- Data logger function
| Voltage DC V | |||
| Measuring range | Resolution | Accuracy | |
| 0 … 30V | 0.001V | ± 0.02% of reading + 2 Dgt | |
| Current DC mA | |||
| Measuring range | Resolution | Accuracy | |
| 0 … 24-mA | 0.001-mA | ± 0.02% of reading + 2 Dgt | |
| Measurement / Simulation | |||
| Thermocouples | Measuring range | Resolution | Accuracy |
| E | -200 … 1200°C / -328 … 2192°F | 0.1°C / 0.18°F | ± 0.3°C / 0.54°F |
| J | -200 … 1200°C / -328 … 2192°F | 0.1°C / 0.18°F | ± 0.3°C / 0.54°F |
| K | -200 … 1372°C / -328 … 2501°F | 0.1°C / 0.18°F | ± 0.3°C / 0.54°F |
| T | -200 … 400°C / -328 … 752°F | 0.1°C / 0.18°F | ± 0.3°C / 0.54°F |
| B | 450 … 1800°C / 842 … 3272°F | 0.1°C / 0.18°F | ± 0.3°C / 0.54°F |
| R | 0 … 1750°C / 32 … 3182°F | 0.1°C / 0.18°F | ± 0.3°C / 0.54°F |
| S | 0 … 1750°C / 32 … 3182°F | 0.1°C / 0.18°F | ± 0.3°C / 0.54°F |
| N | -200 … 1300°C / -328 … 2372°F | 0.1°C / 0.18°F | ± 0.3°C / 0.54°F |
| mV | 10 … 80 mV | 0.001 mV | ± 0.02% of reading + 2μV |
-10 … 250 mV | 0.01 mV | ± 0.02% of reading + 0.02 mV | |
| Note: The specifications refer to the temperature standard ITS-90 | |||
| General specifications | |||
| Display modes | Measurement: mA / V / thermocouple / mV Simulation: thermocouple / mV | ||
| Temperature units | °C / °F / K | ||
| Cold junction compensation error | ≤ ± 0.5°C / 0.9°F | ||
| Maximum input voltage | 30V DC | ||
| Temperature coefficient | <30 ppm | ||
| Input impedance measurement | Thermocouple / mV / V:> 1 MΩ Current measurement: 10 Ω | ||
| Response time | <100 ms | ||
| Impedance | > 4.7 kΩ with thermocouple / mV | ||
| Refresh rate display | 10 Hz | ||
| Isolation | 500V DC | ||
| Data storage | Internal memory 150000 readings | ||
| Interface | USB 2.0 | ||
| Display | 2.4″ TFT LCD 240 x 320 pixels LED illuminated | ||
| Output voltage current loop | 24V DC / 24mA | ||
| HART mA loop resistance | 250 Ω ± 20% | ||
| Special features | Step and ramp function Automatic and manual mode √x, x2: For the measuring function | ||
| Continuity test | Adjustable threshold up to 100 Ω | ||
| Power supply | 3.7V / 2300mAh Li-ion battery | ||
| Charging time | about 5 h | ||
| Power adapter | Input: 100 … 240V AC / 50/60 Hz Output: 5V / 1 A DC | ||
| Battery life | Approx. 15 h: Simulation and measurement with low LCD illumination Approx. 8 h: Measurement with low LCD illumination | ||
| Dimensions | 162 x 82 x 40 mm | ||
| Weight | About 300 g / < 1 lb | ||
| Degree of protection | IP20 | ||
| Operating conditions | Battery operation: 0 … 55°C / 32 … 131°F, 30 … 90% RH Main operation: 0 … 45°C / 32 … 113 °F, 30 … 90% RH | ||
| Storage conditions | -20 .. 60°C / -4 … 140°F, 30 … 90% rh non-condensing | ||
| Heating time | About 15 minutes | ||
- 1 x Thermocouple Calibrator PCE-TTC 30
- 2 x Laboratory cables with 2 mm plug
- 1 x Thermocouple adapter to 2 mm plug
- 2 x Adapter 2 mm on 4 mm laboratory cable
- 2 x Alligator clips
- 1 x Mini USB cable
- 1 x Power supply 5 V / 1 A
- 1 x Carrying bag
- 1 x Software
- 1 x User manual
Related Products
Explore More in Calibration Tools
Explore More in Testing Equipment
Provide us your contact detailsone of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits
Product selected: Model #
*Demonstrations can only be scheduled within the UAE