PCE Instruments RE100P Universal Input Controller

Model # RE100P

Universal input, Adjustable program control, Relay, SSR, and analog output
3.5″ LCD display
50 ms sampling rate
Autotune PID, Memory for several PID parameters
RS485 Modbus interface

BrandPCE Instruments
Model NumberRE100P

ADD TO MY RFQ LIST Add to your requistion list to get a quote.

The process controller is used for temperature and process control. The various inputs and outputs, which are installed as standard on the PID controller, make it possible for the PID controller to be used universally. The universal controller is equipped with program control. In the universal controller, up to 16 programs with 8 segments each can be set. Via the four digital inputs, the respective control programs can be started and stopped, as well as paused and resumed. Likewise, it can be switched between the programs.
The PID controller is equipped with a universal input to which various temperature sensors and sensors with process signal output can be connected. The large LCD display continuously informs about set points and actual values, as well as about the states of the outputs and the respective control programs. The controller is equipped with an RS485 Modbus interface for connection to a process control system.
Universal input
Adjustable program control
3.5″ LCD display
Relay, SSR, and analog output
50 ms sampling rate
Autotune PID
Memory for several PID parameters
RS485 Modbus interface

Measuring function
Input type thermocouple	Measuring & display area	Accuracy
Type B	200 … 1800°C / 392 … 3272°F	± 0.1% ± 2°C / 3.6°F
Type E	-100 … 900°C / -148 … 1652°F	± 0.1% ± 0.5°C / 0.9°F
Type J	-100 … 900°C / -148 … 1652°F	± 0.1% ± 0.5°C / 0.9°F
Type K	-100 … 1300°C / -148 … 2372°F	± 0.1% ± 0.5°C / 0.9°F
Type L	-100 … 900°C / -148 … 1652°F	± 0.1% ± 1.5°C / 2.7°F
Type N	-200 … 1300°C / -328 … 2372°F	± 0.1% ± 0.5°C / 0.9°F
Type R	0 … 1700°C / 32 … 3092°F	± 0.1% ± 1°C / 1.8°F
Type S	0 … 1700°C / 32 … 3092°F	± 0.1% ± 1°C / 1.8°F
Type T	-250 … 300°C / -418 … 572°F	± 0.1% ± 0.5°C / 0.9°F
Type U	-200 … 400°C / -328 … 752°F	± 0.1% ± 0.5°C / 0.9°F

Input type resistance sensors	Measuring & display area	Accuracy
Pt100	-200 … 850°C / -328 … 1562°F	± 0.1% ± 0.5°C / 0.9°F
	-100 … 160°C / -148 … 320°F	± 0.1% ± 0.5°C / 0.9°F
NTC	-60 … 150°C / -76 … 302°F	± 0.1% ± 0.5°C / 0.9°F

Input type process stream	Measuring & display area	Accuracy
0 … 20-mA	-32768 … 32767	± 0.1% ± 1 digit
4 … 20-mA	-3276.8 … 3276.7	± 0.1% ± 1 digit

Input type mV	Measuring & display area	Accuracy
0 … 150 mV	-327.68 … 327.67
	-32,768 … 32,767	± 0.1% ± 20 μV

Input type process voltage	Measuring & display area	Accuracy
0 … 5V		± 0.1% ± 1 digit
1 … 5V		± 0.1% ± 1 digit
0 … 10V		± 0.1% ± 1 digit

Input type resistor	Measuring & display area	Accuracy
0 … 550 Ω		± 0.2% ± 0.1 Ω
0 … 10 kΩ		± 0.5% ± 10 Ω

Digital input for program control	Measuring & display area	Accuracy
	5V or 30V	Start-Stop Pause
	RI = 100 Ω	Previous program
		Next program

Output	Control relay: NO / NC 250V AC / 2 A
	Alarm 1: NO / NC 250V AC / 2 A
	Alarm 2: NO 250V AC / 2 A
	SSR: 0 … 12V / 40-mA
	mA: 0/4 … 20-mA (750 Ω max.)
	V: 0 … 10V
Power supply	90 … 250V AC / 50/60 Hz
Input	7 VA
Electrical connection	2.5 mm² via screw terminals
Interface	RS485 Modbus RTU
Operating conditions	0 … 50°C / 32 … 122°F, max. 80% rh
Storage conditions	-25 … 70°C / -13 … 158°F, max. 80% rh
Degree of protection	Front: IP65
	Back side: IP20
Dimensions	96 x 96 x 81 mm / 3.8 x 3.8 x 3.2 in
Panel cut	92 x 92 mm / 3.6 x 3.6 in
Weight	About 400 g / < 1 lb