• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • PCE Instruments PWT 10 Pocket-size Conductivity Tester

    # PWT 10

    • The conductivity meter is a good solution for anyone who wants to check the conductivity of ultra-pure water. This conductivity tester is a compact device with an integrated temperature sensor for optimum temperature compensation.
    • Among other things, the conductivity tester has a very low measuring range of only 0 to 20 μS / cm. Furthermore, the conductivity meter is able to accurately determine the salinity of liquids.
    • The PCE-PWT 10  conductivity tester has an automatic temperature compensation in the range of 0 to 60 ° C. The calibration of the conductivity tester is carried out via a three-point calibration.
    • The conductivity meter is a good solution for anyone who wants to check the conductivity of ultra-pure water. This conductivity tester is a compact device with an integrated temperature sensor for optimum temperature compensation. Among other things, the conductivity tester has a very low measuring range of only 0 to 20 μS / cm.
    • Furthermore, the conductivity meter is able to accurately determine the salinity of liquids. The PCE-PWT 10  conductivity tester has an automatic temperature compensation in the range of 0 to 60 ° C. The calibration of the conductivity tester is carried out via a three-point calibration.
    • For the desalting stage of water purification the pure water tester PCE-PWT 10 is helpful. Separation of salt is a necessary process and can be monitored by pure water tester. The latter are a part of both, electro-dialysis and reverse osmosis. Though, the purpose is the same, the principle of these process is different. Reverse osmosis is a successor of electro-dialysis and if the latter uses electrical current, the former is based on pressure. For desalting of water also forward osmosis may be applied, which helps to separate the dissolved solutes from the pure water. Both methods are aimed at improving the pure water quality. This quality can be checked in the end by the pure water tester.
    • Conductivity is a material-specific ability to conduct electrical current. The electrolytic conductivity of aqueous solutions depends on concentration of water constituents, their degree of dissociation and the valency of the cations and anions as well as the mobility of these ions, which in turn is influenced by the temperature. Our pure water tester can accurately determine the ion content. In wastewater, the conductivity is considered as a sum parameter for the ion concentration and thus for the total salinity. With the help of our pure water tester it is possible to make a quick and easy statement about the total content of dissolved salts in the water.

     

    • Smallest measuring range up to 20 µS/cm
    • Compact design of pure water tester housing
    • Automatic temperature compensation by pure water tester
    • Salinity measurement
    • Internal three-point conductivity calibration
    • Changeable conductivity electrode
    Conductivity measuring range0 to 20 µS/cm, 0 to 200 µS/cm, 0 to 2000 µS/cm, 0 to 20.00 mS/cm
    Resolution0.01 / 0.1 / 1
    Accuracy± 1 % of measuring range
    Salinity measuring range0.00 to 10.00 ppt
    Resolution0.01 ppt
    Accuracy± 1 % of measuring range
    Temperature measuring range0 to 60 °C / 32 to 140 °F
    Resolution0.1 °C
    Accuracy± 1 °C
    Temperature compensation range0 to 60 °C / 32 to 140 °F
    Temperature coefficient2 % / °C
    Number of calibration points1 to 3
    Calibration points84 µS/cm, 1413 µS/cm, 12.88 mS/cm
    Cell constantK=1
    Normal media temperature25 °C / 77 °F
    Hold functionBy pressing a button
    Automatic shutdown8 minutes after the last key press
    PauseReset to factory setting possible
    Power supply2 x 1.5 V AAA batteries
    Operating timeca. 200 hours
    Dimensions185 x 40 mm / 7.2 x 1.5 in
    Weightca. 100 g / 3.5 oz
    • 1 x Conductivity Meter PCE-PWT 10
    • 2 x 1.5 V AAA batteries
    • 1 x User manual for pure water tester

    Explore More in Water Quality Meters

    Provide us your contact detailsone of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







      *Demonstrations can only be scheduled within the UAE

      Sign up to stay in the know-how of our latest products, updates, special offers, and more.

      • Subscription Form