PCE Instruments PVS 20 Acceleration Sensor

Model # PVS 20

Acceleration Sensor for monitoring the vibration speed / 4 to 20 mA output MIL-C-5015 connection / 3 to 1500 Hz bandwidth
It has been developed for the continuous monitoring of the vibration speed and is available in different versions. Depending on the type of vibration sensor, a distinction is made between design and measuring range.
The Acceleration Sensor measures the vibration speed in the range of ± 12.7 mm / s or ± 25.4 mm / s in the frequency range between 3 Hz and 1500 kHz.
The measured vibration speed is output as a 4 to 20 mA process current and is looped through a MIL-C-5015 connector to a controller or process display.
Depending on the design, the connection socket is attached to the vibration sensor vertically or horizontally. The Acceleration Sensor can be operated with a voltage of 12 to 24 V DC.

Measuring Range	± 25.4 mm / s
Frequency Range	3 … 1500 Hz
Output	2 conductors 4 … 20 mA
Sensitivity	<5%
Shock Limit	± 1000 g
Power Supply	12 … 24 V DC in current loop
Isolation from ground	> 108 ohms
Output Impedance	<100 ohms
Design	Vertical Connection
Electrical Connections – Pin A	+ 4 … 20 mA
Electrical Connections – Pin B	– 4 … 20 mA
Connection Type	2 Pin MIL-C-5015
Operating Temperature	-40 … 85° C
Dimensions	Ø22 x 51
Mounting Thread	M6