PCE Instruments PVS 10 Acceleration Sensor

Model # PVS 10

Acceleration Sensor for monitoring the vibration speed / 4 to 20 mA output <br>MIL-C-5015 connection / 3 to 1500 Hz bandwidth
It has been developed for the continuous monitoring of the vibration speed. The Acceleration Sensor is available in different versions. Depending on the type of vibration sensor, a distinction is made between design and measuring range.
It measures the vibration speed in the range of ± 12.7 mm/s or ± 25.4 mm/s in the frequency range between 3 Hz and 1500 kHz. The measured vibration speed is output as a 4 to 20 mA process current.
It is looped through a MIL-C-5015 connector to a controller or process display. Depending on the design, the connection socket is attached to the vibration sensor vertically or horizontally.
It can be operated with a voltage of 12 to 24 V DC.
Horizontal or vertical installation
Process signal output
MIL-C-5015 connector
M6 process connection
Different measuring ranges
Robust construction

Measuring Range	± 12.7 mm/s
Frequency Range	3 to 1500 Hz
Output	2 Conductors 4 to 20 mA
Sensitivity	<5%
Shock limit	± 1000 g
Power supply	12 to 24 V DC in current loop
Isolation from ground	> 108 ohms
Output impedance	<100 ohms
Design	Vertical Connection
Electrical connections – Pin A	+ 4 … 20 mA
Electrical connections – Pin B	– 4 … 20 mA
Connection type	2 Pin MIL-C-5015
Operating Temperature	– 40 … 85 ° C
Dimensions	Ø22 x 51
Mounting thread	M6