• Store Locator
  • Schedule a
    Demo

  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
    • request A QUOTE
    Create a Requisition
    • PCE_Dynamometer_PTR 200N_1
    • PCE_Dynamometer_PTR 200N_2 - Force Gauge for Tensile Force 200 N
    • PCE_Dynamometer_PTR 200N_3 - Force Gauge for Tensile Force 200 N

    PCE Instruments PTR 200N Force Gauge for Tensile Force 200 N

    # PTR 200N

    • Differently shaped measuring adapter
    • Device for mounting on test stands
    • Peak measurement
    • Delivery with extension rod
    • Evaluation via USB interface
    • Fast measured value display
    PCE Instruments
    • PCE Instruments
    • PTR 200N
    ADD TO MY RFQ LIST
    • The PCE-PTR 200N force gauge is a hand-held device up to 200 N / 45 lbs. The force measuring device can determine the units N, kg, and lb. The PCE-PTR 200N force gauge is supplied with various shaped adapters. These can be screwed onto the device and thus offer the optimum solution for differently designed surfaces in the measurement of pressure and tension. In addition to the adapters, an extension rod is also supplied, which allows measurements in hard-to-reach places. This extension rod has a length of 65 millimeters / 2.6 inches. The PCE-PTR 200N force gauge includes a flat head adapter, hook adapter, ball head adapter, chisel head adapter, and a notched head adapter, with the hook adapter used for pulling force measurements.
    • The PCE-PTR 200N force gauge offers the possibility to attach the force measuring device to a test stand by means of threads on the rear of the device. Test stands are always used in a force gauge if reproducible measurement results are required during the force measurement. These test stands are ideal additions to a force gauge because they are operated by a precise handwheel or a motor. In addition, both tensile and compressive force measurements can be performed on them. Experiments in the laboratory are thus possible with the force gauge as well as the inspection at the incoming goods inspection.
    • Differently shaped measuring adapter
    • Downloadable evaluation software
    • Device for mounting on test stands
    • Peak measurement
    • Power supply via charging adapter
    • Delivery with extension rod
    • Evaluation via USB interface
    • Fast measured value display
    Measuring range0 … 200 N / 0 … 45 lbs
    Resolution0.1 N / 0.02 lbs
    Pressure calibration1 Mpa
    Load cellIntegrated load cell with M6 connection
    Measuring range1 … 100% of the full scale
    Measurement accuracy± 0.5%
    Unitsn, kg, lb
    DisplayLCD
    Operating temperature10 … 30°C / 50 … 86°F
    Relative humidity15 … 80% relative humidity
    Working conditionsThe device must not be located near sources of vibration or corrosive substances
    Weight1 kg / 2.2 lbs
    • 1 x Dynamometer (Penetrometer) PCE-PTR 200N
    • 1 x Penetration tip Ø 6 mm
    • 1 x Penetration tip Ø 8 mm
    • 1 x Penetration tip Ø 11 mm
    • 1 x Flathead adapter
    • 1 x Hook adapter
    • 1 x Ball head adapter
    • 1 x Chisel head adapter
    • 1 x Notch head adapter
    • 1 x Extension rod (65 mm)
    • 1 x USB cable
    • 1 x Power plug
    • 2 x Locking rings
    • 1 x Equipment case
    • 1 x Software
    • 1 x User manual

    Related Products

    Explore More in Specialty Meters

    Explore More in Testing Equipment

    Provide us your contact detailsone of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







      *Demonstrations can only be scheduled within the UAE

      SUBSCRIBE TO OUR NEWSLETTERS!

      Sign up to stay in the know-how of our latest products, updates, special offers, and more.

      • Subscription Form