PCE Instruments PA 8000 Three-Phase Power Analyzer with 3 Current Clamp

Model # PA 8000

A unit that is able to measure and record the power in both single-phase or three-phase circuits. With the PCE-PA 8000 Clamp Meter you will be able to perform prolonged measurements.
Measurement values are saved in .xls format on the included SD card of our Clamp Meter to be easily analyzed on the computer. Measurement sample rate can be set from 2 to 7200 seconds.
It can also measure power and determine both power factor and phase angle. The clamps of the PCE-PA 8000 Clamp Meter can be used for cables with a diameter of 50 mm/2.0 in.

A unit that is able to measure and record the power in both single-phase or three-phase circuits. With the PCE-PA 8000 Clamp Meter you will be able to perform prolonged measurements.
Measurement values are saved in .xls format on the included SD card of our Clamp Meter to be easily analyzed on the computer. Measurement sample rate can be set from 2 to 7200 seconds.
It can also measure power and determine both power factor and phase angle. The clamps of the PCE-PA 8000 Clamp Meter can be used for cables with a diameter of 50 mm/2.0 in.
It is the ideal tool to be used in power supply networks. Its 3.7 in/94 mm display allows you to read all measured values for a quick analysis as well as providing a view of the current, voltage, and power.
Analysis of a network of 3 phases/4 conductors, 3 phases/3 conductors, 1 phase/2 conductors, 1 phase/3 conductors
Measures effective real value of current and voltage
Measures active, apparent, and reactive power
Power Factor (PF), phase angle (Φ)
Measures voltage up to 600 V
Measures current up to 1200 A
It meets the IEC 1010 and CAT III 600 V standards
Integrated timer and calendar to record data
Measured values are recorded in the included SD card
Data is stored in Excel format for further study
Data can be transferred to a PC through data cable
Large 3.7 in / 94 mm LCD display

Display	3.7 in / 94.0 mm LCD (320 x 240 pixels) with LED backlight
Electrical properties	AC V, AC A, active power, apparent power, power factor, phase angle, mains frequency
Voltage ranges	10 V … 600 V AC, automatic range selection
Security / Standards	IEC1010CAT III 600V
AC V input resistance	10 MΩ
Operation frequency of current clamps	40 Hz to 1 kHz
Tested operation frequency of current clamps	45 Hz to 65 Hz
Overload protection	AC V / 720 V rms
AC A	1300 A with current clips
Memory	SD card up to 16 GB
Measurement display rate	1 second
Data logger	SD
Measurement sample rate	2 seconds to 7200 seconds
Data output	USB or RS-232, depending on the connection cable
Operating temperature	0º C to 50º C / 32° F to 122° F
Operating humidity	< 80 % H.r.
Power	8 x 1.5 V AA batteries / mains component
Input current (Meter)	300 mA DC
Input current (Clamp)	34 mA DC
Max. diameter	50 mm / 1.9 in
Weight (Meter)	948 g / 33.4 oz (with batteries)
Weight (Clip)	467 g / 16.4 oz (with cable)
Dimensions (Meter)	225 mm x 125 mm x 64 mm / 8.8 in x 4.9 in x 2.5 in
Dimensions (Clamp)	210 mm x 64 mm x 33 mm / 8.2 in x 2.5 in x 1.2 in
Dimensions (Jaw)	86 mm / 3.3 in (exterior)