Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.
# OC 2
Measuring function | |
DC voltage measurement | |
Range | 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V |
Resolution | 0.1 mV, 1 mV, 10 mV, 100 mV, 1 V |
Accuracy | ±(0.75 % + 10 dgt.), ±(0.75 % + 10 dgt.), ±(0.75 % + 10 dgt.), ±(0.75 % + 10 dgt.), ±(1.5 % + 10 dgt.) |
AC voltage measurement | |
Range | 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 750 V |
Resolution | 0.1 mV, 1 mV, 10 mV, 100 mV, 1 V |
Accuracy | 50 Hz to 1 kHz: ±(1 % + 10 dgt.), 400 Hz to 10 kHz: ±(1 % + 10 dgt.), (not defined above 10 kHz), – , 50 Hz to 1 kHz: ±(1.5 % + 10 dgt.) |
DC current measurement | |
Range | 40.00 mA, 400.0 mA, 4.000 A, 20.00 A |
Resolution | 10 µA, 100µA, 1 mA, 10 mA |
Accuracy | ±(1.2 % + 10 dgt.), ±(1.2 % + 10 dgt.), ±(1.2 % + 10 dgt.), ±(1.2 % + 10 dgt.) |
AC current measurement | |
Range | 40.00 mA, 400.0 mA, 4.000 A, 20.00 A |
Resolution | 10 µA, 100µA, 1 mA, 10 mA |
Accuracy | 50 Hz to 1 kHz: ±(1.5 % + 10 dgt.), (not defined above 1 kHz) |
Resistance measurement | |
Range | 400.0 Ω, 4.000 kΩ, 40.00 kΩ, 400.0 kΩ, 4.000 MΩ, 40.00 MΩ |
Resolution | 0.1 Ω, 1 Ω, 10 Ω, 100 Ω, 1 kΩ, 10 kΩ |
Accuracy | ±(1.0 % + 5 dgt.), ±(1.0 % + 5 dgt.), ±(1.0 % + 5 dgt.), ±(1.0 % + 5 dgt.), ±(1.0 % + 5 dgt.), ±(3.0 % + 5 dgt.) |
Capacitance | |
Range | 512.0 nF, 5.120 µF, 51.20 µF, 100.0 µF |
Resolution | 1 pF, 10 pF, 100 pF, 1 nF, 10 nF |
Accuracy | ±(2 % + 10 dgt.), ±(1 % + 3 dgt.), ±(1 % + 3 dgt.), ±1.5 % + 3 dgt.), – |
Frequency counter | |
Range | 5.12 Hz to 5.12 MHz |
Resolution | 0.1 to 1 kHz |
Accuracy | ±(1 % + 5 dgt.), at a signal amplitude of > 3 Vpp, ACV or 20 mA RMS, AC A |
Frequency ratio | |
Range | 0.1 to 99.9 % |
Resolution | 0.10% |
Accuracy | – |
Diode measurement | open circuit 1.5 V, max. current 1.5 mA |
Continuity test | Beep at> 30 Ω |
Automatic measuring range | at every function |
Exceeding the measuring range | O.L. is displayed |
Measuring rate | 2.5 times / sec. |
dB (-80 to +80 dB) reference | 2, 3, 8, 16, 50, 75, 93, 110, 125, 135, 150, 300, 600, 900, 1000, 1200 Ω |
Fuse | 0.5 A / 250 V; 20 A / 500 V |
Oscilloscope | |
Analog bandwidth | DC 20 MHz (50 mV / div to 2 V / div), DC 10 MHz (5 V / div to10 V / div), >10 V / div for reference only |
Real-time sample rate | 80 MS/s |
Vertical resolution | 8 Bits |
Non-linearity | ± 1 Bit |
Channel number | 1 |
Input coupling | DC/AC/GND |
Display | Vertical ±4.8 horizontal 12.8 |
Vertical display area | 50 mV/div to 200 V/div |
Vertical accuracy | ± (5 % + 0.1 div.) |
Horizontal display area | 31.25 ns/div to 20 s/div |
Horizontal accuracy | ± (0.01 % + 0.1 div.) |
Trigger edge | Increases in length / falls in length |
Trigger level | ± 12 div (at each step 0.1 div) |
Trigger position | ± 6 div (at each step 0.1 div) |
Automatic settings | Vertical amplitude and automatic settings |
Measurement mode | Automatic / Normal / Single |
Automatic measuring function | Vpp, Vavg, RMS, dBm |
Cursor measurement function | dV, dt, 1/dt (frequency) |
Automatic measurement accuracy | ± (5 % + 0.1 div) |
Automatic zero reference | In DC/dB measurement |
Recording length | 12.8 div |
General technical data | |
Display | 128 x 128 pixel LC-display |
Backlight | white LED, 2 brightness levels |
Power supply battery | Li-Ion battery, 3.7 V, 18650 |
Power supply mains | Primary: 100 to 240 V 50/60 Hz, Secondary: 5 VDC, 1.5 A |
Memory | 50 measurement data (one DMM and DSO are recorded per measurement file) |
Battery life | ca. 6 to 8 hours |
Operating conditions | 0 to 50°C / 32 to 122°F; <75 % r.H. |
Dimensions | 86 x 186 x 32 mm / 3.39 x 7.32 x 1.26 in |
Input impedance | 10 MΩ |
Auto power off | Switch-off, 5 to 60 min. adjustable |
Charging time | ca. 3 hours |
Storage conditions | -10 to 60°C / -14 to 140°F |
Weight | 325 g / 0.72 lb |
Standards | IEC1010 CAT III 1000V |
Product selected: Model #
*Demonstrations can only be scheduled within the UAE