PCE Instruments MCA 50 Universal Multi-function Calibrator

Model # MCA 50

Universal calibrator with powerful battery / Transducer for simulation and measurement / Generation of increments / Extensive measurement and simulation functions
The digital multimeter PCE-MCA 50 is designed for calibration and maintenance. This unit enables the measurement and simulation of electrical quantities.
Due to the battery operation, the digital multimeter PCE-MCA 50 can be used in different locations. The calibrator performs measurement functions, voltage and current simulations, as well as a continuity test.

Universal calibrator with powerful battery / Transducer for simulation and measurement / Generation of increments / Extensive measurement and simulation functions
The digital multi-meter PCE-MCA 50 is designed for calibration and maintenance. This digital multi-meter enables the measurement and simulation of electrical quantities. Due to the battery operation, the digital multi-meter PCE-MCA 50 can be used in different locations. The measurement functions offered are a versatile measuring instrument that can be used in many areas. Depending on the application, the digital multi-meter can run for up to 17 hours per battery charge. The measured results can be stored on the internal measured value memory. This offers a capacity for up to 15000 values.
The digital multi-meter offers the possibility of generating and measuring DC and DC. The operation of the digital multi-meter is carried out in a simple manner via nine keys installed on the front. Likewise, test leads and thermocouple can be connected. The calibrator performs measurement functions, voltage and current simulations, as well as a continuity test. The measured values can be read off the large LC display.
Compact handset
User friendly menu
Rechargeable strong battery
Adjustable back-light
Extreme value and average measurement
Continuity test
USB interface
ABS housing with rubber protective cover

Display modes (Measurement)	mA / V / mV / mA (24V) / Switch test / Temperature thermocouple / Resistance thermometer / Frequency / Pulse
Display modes (Simulation)	mA / V / mV / mA (2 W) / Resistance / Resistance Thermometer / Temperature Thermocouple / Frequency / Pulse
Maximum input voltage	30V DC
Input impedance Measurement	Thermocouple, mV, V, frequency, pulse: 1 MΩ, mA: 10 MΩ
Response time	<100 ms
Load impedance	> 4.7 KΩ for thermocouple / mV / V / pulse / frequency, <750 Ω for mA
Refresh rate display	10 readings per second
Isolation	500V DC
Data storage	150000 measured values maximum
Interface	USB 2.0
Display	3.2in TFT LCD, 240 x 320 pixels, LED illuminated
Output voltage Current loop	24V DC / 24-mA
HART mA loop Resistance	250 Ω ± 20%
Special features	Step and ramp function, Automatic and manual, mode √x, x2: For the measuring function
Continuity test	Adjustable threshold value up to 100 Ω
Power supply	Rechargeable battery, 3000-mAh 3.7V
Charging time	Max. 5 hours
Power adapter	100 to 240V AC, 50/60 Hz, output 5V DC at 1 A
Battery life (> 17 h)	Simulation and measurement with low LCD illumination
Battery life (> 9 h)	Measurement with low LCD illumination
Dimensions (L x W x H)	185.6 x 97.1 x 41.3 mm / 7.3 x 3.8 x 1.6 in
Weight	<500 g / 1.1 lbs
Protection class	IP20
Operating conditions	0 to 55°C / 32 to 131°F, 30 to 90% RH (non-condensing)
Storage conditions	-20 to 60°C / -4 to 140°F, 30 to 90% rh (non-condensing)
Heating time	5 minutes