• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • Create a Requisition

    PCE Instruments LCT 3 Clamp Meter AC 150 A

    # LCT 3

    • The multimeter is the ideal measuring instrument to measure leakage currents. This is made possible by the extensive measuring range of the multimeter.
    • Also, current measurements up to 150 A AC can be made with the multimeter. To test supply lines with a current of up to 150 A, the multimeter for the corresponding cable cross-section can be opened up to 30 mm.
    • In addition to the current measurement, the multimeter can also measure voltages up to 600V directly. Because of the current and voltage measurement, the multimeter is the perfect measuring instrument to carry out measurements and analyzes on, for example, three-phase networks.
    • The multimeter is the ideal measuring instrument to measure leakage currents. This is made possible by the extensive measuring range of the multimeter. Also, current measurements up to 150 A AC can be made with the multimeter. To test supply lines with a current of up to 150 A, the multimeter for the corresponding cable cross-section can be opened up to 30 mm.
    • In addition to the current measurement, the multimeter can also measure voltages up to 600V directly. Because of the current and voltage measurement, the multimeter is the perfect measuring instrument to carry out measurements and analyzes on, for example, three-phase networks. For example, the continuity test can be used to find a wrong wiring in sub-distribution boxes.
    • 30 mm current clamp opening
    • Temperature measurement with thermocouple type K
    • Current measurement up to 150 A AC
    • Covers a wide range of measurements
    • Voltage measurement up to 600V AC / DC RMS
    • Transport bag for mobile use
    AC current measurement
    measuring rangeResolution   AccuracyAccuracy
    4-mA0.001-mA± (2% + 10 digits)± (3% + 5 digits)
    40-mA0.01-mA± (2% + 10 digits)± (3% + 5 digits)
    400-mA0.1-mA± (2% + 5 digits)± (3% + 3 digits)
    4 A0.001 A± (2% + 5 digits)± (3% + 3 digits)
    40 A0.01A± (2% + 10 digits)± (3% + 5 digits)
    150 A0.1 A± (2% + 10 digits)± (3% + 5 digits)
    Frequency range: 40 Hz … 1 kHz (sine wave)
    Maximum input current: 150 A AC
    DC voltage
    measuring rangeResolutionAccuracy
    4V0.001V± (0.5% + 4 digits)
    40V0.01V
    400V0.1V
    600V1V
    Input impedance: 10 MΩ
    Maximum input voltage: 600V AC / DC RMS
    AC voltage 
    measuring rangeResolutionAccuracy
    4V0.001V± (1% + 3 digits)
    40V0.01V
    400V0.1V
    600V1V
    Input impedance: 10 MΩ
    maximum input voltage: 600V AC / DC RMS
    Frequency range: 40 Hz … 1 kHz (sine wave)
    Resistance
    measuring rangeResolutionAccuracy
    400 Ω0.1 Ω± (0.8% + 3 digits)
    4 kΩ0.001 kΩ
    40 kΩ0.01 kΩ
    400 kΩ0.1 kΩ
    4 MΩ0.001 MΩ
    40 MΩ0.01 MΩ± (1% + 3 digits)
    Measuring voltage in open circuit: approx. 0.4V
    Overvoltage protection: 600V AC / DC RMS
    Continuity test
    measuring rangeResolutionAccuracy
    Beep at < 40 Ω0,1Ω
    Overvoltage protection: 600V AC / DC RMS
    Temperature
    measuring rangeResolutionAccuracy
    -20 … 0°C1°C± (3% + 5 digits)
    -4 … 32°F1°F
    -0 … 400°C1°C± (1.5% + 5 digits)
    32 … 757°F1°F
    400 … 1000°C1°C± (3% + 5 digits)
    752 … 1832°F1°F
    Overvoltage protection: 600V AC / DC RMS
    The temperature accuracies do not include the accuracies of the temperature sensors
    Capacity
    measuring rangeResolutionAccuracy
    40.00 n0.01 nF± (3% + 8 digits)
    400.0 nF0.1 nF
    4,000 μF0.001 μF
    40.00 μF0.01 μF
    400.0 μF0.1 μF
    4,000mF0.001 μF
    40.00 mF0.01 μF
    Overvoltage protection: 600V AC / DC RMS
    Diode test
    measuring rangeResolutionAccuracy
    3.2V0.001V
    Overvoltage protection: 600V AC / DC RMS
    Test voltage: 3.2V
    Forward current: 1-mA
    The accuracies refer to the following ambient conditions: 23 ± 5°C / 9°F and < 75% RH
    General specifications
    Maximum current clamp opening30 mm
    Automatic shutdownAfter 30 minutes, can be deactivated
    Power supply2 x 1.5V AAA battery
    Measuring rate3 measurements per second
    Display with overvoltage“OIL”
    Maximum display4000
    DisplayLCD display
    Maximum working height2,000 m / 13,123 ft
    Temperature coefficient0.1 x accuracy x °C, °F*
    Operating conditions18 … 28°C / 64 … 82°F
    Store control admixtures-10 … 50°C / 14 … 122°F
    Dimensions213 x 62 x 38 mm / 8.4 x 2.4 x 1.5 in
    WeightAbout 238 g / < 1 lb with batteries
    *The temperature is the difference between the temperature of the operating conditions and the current ambient temperature.
    • 1 x Voltmeter PCE-LCT 3
    • 1 x Transport bag
    • 1 x Thermocouple type K
    • 1 x Pair of test leads
    • 2 x 1.5V AAA batteries
    • 1 x User manual

    Provide us your contact detailsone of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







      *Demonstrations can only be scheduled within the UAE

      Sign up to stay in the know-how of our latest products, updates, special offers, and more.

      • Subscription Form