PCE Instruments IT100 Insulation Tester 1000V

Model # IT100

The insulation tester PCE-IT100 detects with auxiliary voltages of 125V, 250V, 500V and 1000V insulation resistors up to max. 4000 MΩ.
Furthermore, the measurement of low-resistance resistors up to 400 Ω and a measurement function for alternating and also DC voltages is offered by this insulation tester.
Continuity tester with a beep is also part of the equipment of the insulation meter. In addition to a data-hold function for holding the current measured value, the max. Or min.
Value, in the insulation tester, can also be recorded during voltage and low-ohm measurement.

BrandPCE Instruments
Model NumberIT100

ADD TO MY RFQ LIST Add to your requistion list to get a quote.

The insulation tester PCE-IT100 detects with auxiliary voltages of 125V, 250V, 500V and 1000V insulation resistors up to max. 4000 MΩ. Furthermore, the measurement of low-resistance resistors up to 400 Ω and a measurement function for alternating and also DC voltages is offered by this insulation tester. A continuity tester with a beep is also part of the equipment of the insulation meter. In addition to a data-hold function for holding the current measured value, the max. Or min. Value, in the insulation tester, can also be recorded during voltage and low-ohm measurement.
Thanks to the large numbers and the lighting, the display of the insulation tester is easy to read even under difficult lighting conditions. The large buttons and the rotary knob for selecting the measuring functions allow easy operation of the PCE-IT 100 insulation meter. The insulation tester comes with a set of test leads with test probes, a test lead with crocodile clip and 6 batteries.
Observed limits for insulation measurement
– For new plants (dry rooms): 1000 ohms x volts of operating voltage (eg at 230 volts> 230 kOhms)
– For new installations (wet rooms, outdoors): 500 ohms x volts of operating voltage
– Earthed devices: 1000 ohms x volts of operating voltage
– Protected devices: 2 MOhm
– Power tools: 2 MOhm
– Protective extra-low voltage: 250 kOhm
– Electrical measuring devices: 5 MOhm
– Common test voltage values are 100 volts for low voltage and telecommunication systems, 500 volts for building installation and home appliances, 1000 volts for low voltage motors and transformers
– Large measuring range
– 4 different test voltages up to 1 kV
– Auto power-off function
– Safety: EN 61010-1, CAT III 1000V
– Dual display with backlight
– Carrying case included
– Single measurement and continuous measurement
– An ISO calibration certificate is available as an option

AC voltage (40 to 400 Hz)
Measuring range	750V
Resolution	1V
Accuracy	± 0.8% ± 3 dgt
DC voltage
Measuring range	1000V
Resolution	1V
Accuracy	± 1.2% ± 10 dgt
Resistance
Measuring range	40 Ω / 400 Ω
Resolution	0.01 Ω / 0.1 Ω
Accuracy	± 1.2% ± 3 dgt
Insulation resistance
Measuring range	4 MΩ / 40 MΩ / 400 MΩ / 4000 MΩ
Resolution	0.001 MΩ / 0.01 MΩ / 0.1 MΩ / 1 MΩ
Insulation resistance 125V	± (2% + 10 dgt) / ± (2% + 10 dgt) / ± (4% + 5 dgt) / ± (5% + 5 dgt)
Insulation resistance 250V	± (2% + 10 dgt) / ± (2% + 10 dgt) / ± (3% + 5 dgt) / ± (4% + 5 dgt)
Insulation resistance 500V	± (2% + 10 dgt) / ± (2% + 10 dgt) / ± (4% + 5 dgt) / ± (4% + 5 dgt)
Insulation resistance 1000V	± (3% + 10 dgt) / ± (2% + 10 dgt) / ± (2% + 5 dgt) / ± (4% + 5 dgt)
Continuity test	Beep: ≤ 35 Ω, test current ≤ 200-mA
Equipment supply	6 x 1.5V AA battery
Environmental conditions	0 to 40°C / 32 to 104°F, <80% RH (operation) / -10 to 60°C / 14 to 140°F, <70% RH (bearing)
Dimensions	200 x 92 x 50 mm / 7.9 x 3.6 x 2 in
Weight (with battery)	700 g / 1.5 lbs
Standardization	IEC10101, CAT III 1000V