PCE Instruments GPA 62 Three-Phase Current Clamp Meter

Model # GPA 62

The Three-Phase Clamp Meter (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform.
It comes with a built-in graphic display to show network analyzer values. Measured values can be both recorded and transferred to a PC for further analysis.
It is a professional handheld device to determine several parameters. Thanks to the back-light display, it is possible to get an accurate reading of measured values even with poor light conditions.

The Three-Phase Clamp Meter (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform.
It comes with a built-in graphic display to show network analyzer values. Measured values can be both recorded and transferred to a PC for further analysis.
It is a professional handheld device to determine several parameters. Thanks to the back-light display, it is possible to get an accurate reading of measured values even with poor light conditions.
Although the unit comes calibrated from the manufacturer, an optional laboratory calibration and certificate, that meets ISO standards, can be ordered separately with the device or when an annual re-calibration is required.
Real-time test, register and measurement of voltage and current (real effective)
Measures power factor and phase angle, frequency, energy, active, reactive and apparent power (single-
phase or three-phase in symmetrical networks).
Max. conductor diameter: 55 mm / 2.2 in
Graphic display
Auto shut-off after 15 min. (this function may be disabled)
Optional ISO calibration

Max. clamp opening	55 mm / 2.2 in
Range selection	Auto
Overload indication	Overload
Memory	50,000 readings
Interface	USB
Software and data cable	Included in the delivery. Compatible with Win 2000, XP, ME
Display	Graphic LCD display, 128 x 64 with backlight
Power supply	2x 1.5V AA batteries
Energy consumption	Approx. 10-mA
Dimensions	271 x 112 x 46 mm / 10.6 x 4.4 x 1.8 in
Weight	650 g / 1.4 lbs with batteries
Operating conditions	85% max. R.H. / -10 to 50°C / 14 to 122°F
Protection / Standards	CAT III 600 V / EN 61010-2-032