• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • Create a Requisition

    PCE Instruments DFG N 100TW Torque Meter 1/2″ Square Socket 100 Nm

    # DFG N 100TW

    • The torque wrench tester consists of a handheld measuring device and an external torque transducer.
    • The torsion transducer is connected to the hand-held device via a 1.5 m / 4.9 ft long cable and thus enables installation in a test stand or direct assembly on a test bench.
    • The torque measuring device is delivered adjusted so that the control measurements can be started immediately.
    • The measurement uncertainty of the torque measuring device is only 0.5% of the measuring range.
    PCE Instruments
    • PCE Instruments
    • DFG N 100TW
    • The torque wrench tester consists of a handheld measuring device and an external torque transducer.
    • The torsion transducer is connected to the hand-held device via a 1.5 m / 4.9 ft long cable and thus enables installation in a test stand or direct assembly on a test bench.
    • The torque measuring device is delivered adjusted so that the control measurements can be started immediately.
    • A calibration certificate is optionally available for the torque measuring device. This certificate is a target / actual comparison on a traceable reference standard and thus serves as proof of the measurement accuracy.
    • The measurement uncertainty of the torque measuring device is only 0.5% of the measuring range.
    • The torque measuring device is therefore used as a reference device for testing and adjusting static torque tools.
    • A screw latch is essential for dynamic torques. The torque transducer has a 1/2″ square socket and can perform the torsion measurements in both directions of rotation.
    • With a sampling rate of 1600 Hz, the torque meter reliably detects the first and the maximum torsional moment peak (PEAK).
    • The release moment (” click “) is shown separately in the display and can be deleted either manually or automatically after a set time has elapsed.
    • Thanks to freely adjustable alarm values, the torque measuring device can warn the tester of the overload of the torque tool if it does not trigger itself.
    • For a more detailed analysis of the torsional forces, the PC software included in the scope of delivery can be used.
    • Left / right torsion measurement
    • 1600 Hz sampling rate
    • Error limit 0.5% of the measuring range
    • PEAK / Hold function
    • Graphic display
    • PC software
    • Power adapter and battery operation possible
    Measuring range0 … 100 Nm / 73.76 ft-lb
    Resolution0.1 Nm / 0.0738 ft-lb
    Accuracy± 0.5% of the measuring range
    Units of measurementNm, lbfft, kgfm
    Torque sensor mount1/2″ (12.5 x 12.5 mm) internal square
    Torsion measurementLeft / Right
    Display2.8″ TFT graphic display
    Alarm modesInside Outside
    Sampling rate6 … 1600 Hz
    StorageFor 100 measurement series with 8,000 measurement points each
    Power supplyNiMh battery, 6V / 1600-mAh
    Battery lifeAbout 10 hours
    Power supply/charging adapter12V / 1 A
    OutputsInterface: USB
    Switching output: 12V / 50-mA
    Protection classIP 54
    Operating and storage conditions   -10 … 50°C / 14 … 122°F
    5 … 95% RH non-condensing
    Torque transducer dimensionsH 85 mm / Ø 72 mm / Ø 104 mm (H 3.3 in / Ø 2.8 in / Ø 4.1 in)
    (see technical drawing)
    Sensor cable length / td>Approx. 1.5 m / 4.9 ft
    Dimensions handset200 x 97 x 42 mm / 7.9 x 3.8 x 1.7 in
    Weight handset540 g / 1.2 lbs 
    Weight of the torsion transducer                                  985 g / 2.2 lbs
    • 1 x Torque meter PCE-DFG N 100TW
    • 1 x Torque transducer 100 Nm
    • 1 x 1.5 m / 4.9 ft sensor cable
    • 1 x PC software
    • 1 x USB data cable
    • 1 x Power supply
    • 1 x Carrying case
    • 1 x Sensor screw socket
    • 1 x Instruction manual

    Provide us your contact detailsone of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







      *Demonstrations can only be scheduled within the UAE

      Sign up to stay in the know-how of our latest products, updates, special offers, and more.

      • Subscription Form