• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • Create a Requisition

    PCE Instruments DC 50 True RMS Clamp Meter 1000 AC/DC

    # DC 50

    • The clamp meter PCE-DC 50 is a measuring device for measuring currents of up to 1000 A AC / DC and can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes.
    • The enclosure diameter of the clamp is 48 mm. Thus, you can also perform measurements on cables with a large cross-section.
    • This clamp has an integrated Bluetooth interface. Via this Bluetooth interface a connection to the PC or the smartphone can be established with the measuring pliers. This allows the measured data of the measuring clamp to be stored and analyzed. If the PC does not have a Bluetooth interface to connect the measuring pliers, a suitable Bluetooth adapter is included in the delivery.
    • The clamp meter PCE-DC 50 is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the clamp can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes. The enclosure diameter of the clamp is 48 mm. Thus, you can also perform measurements on cables with a large cross-section. Thanks to the NCVD function, it is possible to use the measuring clamp to check contactlessly whether a voltage is applied to a cable.
    • This clamp has an integrated Bluetooth interface. Via this Bluetooth interface a connection to the PC or the smartphone can be established with the measuring pliers. This allows the measured data of the measuring clamp to be stored and analyzed. If the PC does not have a Bluetooth interface to connect the measuring pliers, a suitable Bluetooth adapter is included in the delivery.
    • Another special feature of the measuring clamp is the measurement of temperatures. Two type-K thermocouples can be connected to the measuring clamp and read out at the same time. Here, temperatures of up to 1000°C / 1832°F  can be measured. The housing of the measuring pliers consists of a robust plastic, which is additionally coated with a rubber coating. Thanks to the additional rubber coating, the measuring pliers can easily withstand impacts.

     

    • Sample rate 2 Hz
    • Cover on the test sockets
    • AC A and AC V measurement
    • Bluetooth interface
    • Cable diameter max. 48 mm
    • Temperature measurement via 2 thermocouples
    • Automatic shutdown
    • Non-contact voltage detection
    General technical data
    Conductor diameterMax. 48 mm
    DisplayTwo lines 50,000 digits
    Continuity test50 ohms / < 50-mA
    Diode test0.3-mA / 2.8V DC
    Battery indicatorBattery icon when battery low
    OverrangeOL, if measuring range exceeded
    Sample rate2 Hz
    InterfaceBluetooth
    Peak detection> 1 ms
    ThermocoupleType K
    Fuse500-mA ceramic quick-acting
    AC bandwidth (AC A / AC V)50 Hz to 400 Hz
    AC measurementTrue RMS
    Operating conditions5°C to 40°C / 41 to 104°F, max. 80% RH at 31°C
    Storage conditions-20°C to 60°C / -4 to 140°F, max. 80% rh
    Power supply9V block battery
    Automatic shutdownAfter about 30 minutes
    Dimensions (W x H x D)230 x 76 x 40 mm / 9 x 3 x 1.6 in
    Weight315 g / < 1 lb
    SecurityIEC 1010-1 (2001):, EN 61010-1 (2001), CAT III 600V, CAT II 1000V Degree of pollution 2
    • 1 x Digital multimeter PCE-DC 50
    • 1 x Test lead set
    • 1 x Transport case
    • 1 x PC software
    • 1 x Bluetooth adapter
    • 2 x Thermocouples type-K
    • 1 x 9V block battery

    Provide us your contact detailsone of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







      *Demonstrations can only be scheduled within the UAE

      Sign up to stay in the know-how of our latest products, updates, special offers, and more.

      • Subscription Form