PCE Instruments DC 41 Clamp Meter AC/DC 600 A/V

Model # DC 41

The voltmeter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the voltmeter, or you can use the integrated clamp mechanism.
By using the clamp of the voltmeter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it. You can also check the continuity with the voltmeter.
Due to its compact design and light weight, the device is well-suited for mobile use. When using the clamp mechanism, it is also possible to run the voltmeter with one hand only.

The voltmeter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the voltmeter, or you can use the integrated clamp mechanism. By using the clamp of the voltmeter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it. You can also check the continuity with the voltmeter.
Due to its compact design and light weight, the device is well-suited for mobile use. When using the clamp mechanism, it is also possible to run the voltmeter with one hand only. The measured data is shown on the large backlit 4-digit display. By using the peak-hold or data-hold function, you can also freeze the readings on the display. The auto power-off function saves battery power, when the device is not in use.
Voltage: 600 V AC/DC
Current: 600 A AC/DC
Electrical Resistance: 1000 Ω
Clamp mechanism
Continuity check
Peak- and data-hold function
Measuring leads included in the package
4-digit display
Display backlight
Auto power-off

Technical Specifications
Direct voltage
Range	Resolution	Accuracy
Input impedance: 1 MΩ	600 V	0.1 V	± 1 % + 2 digits
Direct voltage (peak model)
Range	Resolution	Accuracy
Input impedance: 1 MΩ	600 V	0.1 V	± 1.5 % + 8 digits
Alternating voltage
Range	Resolution	Accuracy
Input impedance: 1 MΩ	600 V	0.1 V	± 1.2 % ± 5 digits (50 … 500 Hz)
Alternating voltage (peak model)
Range	Resolution	Accuracy
Input impedance: 1 MΩ	600 V	0.1 V	± 1.7 % + 10 digits
Direct current
Range	Resolution	Accuracy
60 A	0.01 A	± 2 % + 5 digits
600 A	0.1 A
Direct current (peak model)
Range	Resolution	Accuracy
600 A	0.1 A	± 2.5 % + 8 digits
Alternating current
Range	Resolution	Accuracy
60 A	0.01 A	±2 % + 5 digits (50…60 Hz) ±3 % + 5 digits (60…500 Hz)
600 A	0.1 A
Alternating current (peak model)
Range	Resolution	Accuracy
600 A	0.01 A	±2.5 % + 10 digits
Electrical resistance
Range	Resolution	Accuracy
1000 Ω	0.1 Ω	± 1 % + 2 digits
Continuity check
Range		Buzzer function
<40 Ω
General specifications
Display		4-digit LCD maximum reading: 6200
Sampling rate		3 times/s
Power supply		2 x 1.5 V AAA batteries
Battery life		approx. 50 hours (without buzzer and backlight function)
Auto Power Off		after 30 minutes of inactivity
Operating conditions		0 … +40 °C; < 70 % RH
Storage conditions		-10 … +60 °C; < 80 % RH
Maximum clamp opening		Ø 25 mm
Dimensions		210 x 62 x 36 mm
Weight		273 g with batteries