Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.
# CT 80
Measuring range | Fe: 0 to 5000 μm / 0 to 196.9 mils (depending on sensor) |
NFe: 0 to 3000 μm / 0 to 118.1 mils (depending on sensor) | |
Accuracy | ± (2% of reading + 1 μm / 0.039 mils) |
Resolution | 0.1 μm (0.0039 mils) (< 100 μm / 3.94 mils) |
1 μm / 0.039 mils (> 100 μm / 3.94 mils) | |
Measurable materials | Non-magnetic layers on steel, iron / Non-electrically conductive layers on aluminum, copper |
Min. radius of curvature convex | 5 mm / 0.2 in |
Min. radius of curvature concave | 25 mm / 1 in |
Min. measuring surface | Ø17 mm / 0.7 in |
Min. substrate thickness | 0.2 mm / 0.08 in (on magnetic materials) |
0.05 mm / 0.002 in (on non-magnetic materials) | |
Probe mode | Auto Mode with material detection (Fe + NFe) |
Magnetic mode (Fe) | |
Eddy current mode (NFe) | |
Measurement mode | Single measurement / Continuous measurement |
Calibration | Multi-point calibration (1 to 4 points for each group) / Zeroing |
Units | μm, mm, mils |
Data transfer | USB 2.0 |
Storage | A volatile measuring group (DIR mode) / Four measuring groups with autom. Storage and max. 2000 readings (GEN mode) |
Statistical functions | Number of Measured values, mean, minimum, maximum, standard deviation |
Alarm | Display when the adjustable upper and lower alarm limits are exceeded |
Operating time | Autom. Shutdown mode (3 min.) |
Power supply | 3 x 1.5V AAA batteries |
Display | 128 x 128 px LCD display |
Indicators | Battery status / Fault detection |
Operating conditions | 0 to 50°C / 32 to 122°F |
20 to 90% RH not condensing | |
Storage conditions | -10 to 60°C / 14 to 140°F |
20 to 90% RH not condensing | |
Dimensions (L x W x H) | 143 x 71 x 37 mm / 5.6 x 2.8 x 1.5 in |
Weight (With sensor and batteries) | Approx. 271 g / < 1 lb |
Product selected: Model #
*Demonstrations can only be scheduled within the UAE