PCE Instruments BDM 20 Digital Multi-meter for Stationary Workplace

Model # BDM 20

A digital multi-meter for a stationary workplace that can measure current, voltage and resistance, the digital multi-meter can also use two thermocouples to measure the temperature and also determine the conductivity.
It can perform a variety of different measurement tasks. A direct connection to a PC can be established via the USB interface on the back of the digital multi-meter. The software from the digital multi-meter can then be used to carry out live analyzes using graphics and tables.
Another special feature of the digital multi-meter is the PASS / FAIL function. With this function, target ranges for the measured values can be set for each measuring function.

The digital multi-meter is a multi-meter for a stationary workplace. In addition to measuring current, voltage and resistance, the digital multi-meter can also use two thermocouples to measure the temperature and also determine the conductivity. So the digital multi-meter can perform a variety of different measurement tasks. A direct connection to a PC can be established via the USB interface on the back of the digital multi-meter. The software from the digital multi-meter can then be used to carry out live analyzes using graphics and tables.

Another special feature of the digital multi-meter is the PASS / FAIL function. With this function, target ranges for the measured values can be set for each measuring function. Depending on the actual measured value, a “PASS” (passed) or a “FAIL” (failed) is then shown on the display by the digital multi-meter. The digital multi-meter is therefore used, for example, in quality control. With the help of the adjustable handle, the digital multi-meter can be adjusted for ergonomic use by the operator. The handle of the digital multi-meter can also be used to change the workplace. The housing of the digital multi-meter has a rubberized edge protection, which prevents damage.